Saris Bike Bunk 2-Bike Storage Gravity Stand Instruction Manual

1. ບົດແນະນຳ

The Saris Bike Bunk Gravity Stand provides a convenient and space-saving solution for storing up to two bicycles. Its design utilizes gravity to lean against a wall, eliminating the need for drilling or permanent mounting. The stand features adjustable arms to accommodate various bike frame sizes and includes protective elements to prevent damage to both your bikes and your home surfaces.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຄວາມອາດສາມາດນ້ໍາຫນັກ: This stand is designed to hold a maximum total weight of 80 lbs (approximately 40 lbs per bike). Do not exceed this weight limit.
• ການຈັດວາງ: Ensure the stand is placed on a stable, level surface and leans securely against a sturdy wall.
• Bike Placement: Always ensure bikes are securely seated on the adjustable arms. Distribute weight evenly if possible.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: Keep children and pets away from the stand, especially during bike placement or removal.
• ຂໍ້ສະເໜີ 65 ຄຳເຕືອນ: ຜະລິດຕະພັນນີ້ອາດຈະມີສານເຄມີທີ່ລັດ California ຮູ້ຈັກເພື່ອເຮັດໃຫ້ເກີດມະເຮັງແລະຄວາມຜິດປົກກະຕິໃນການເກີດລູກຫຼືຜົນຮ້າຍຕໍ່ການຈະເລີນພັນອື່ນໆ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ການ​ປະ​ກອບ​:

• Main vertical support pole(s)
• ຫົວໜ່ວຍພື້ນຖານ
• Adjustable bike support arms (2 pairs)
• Cushioned pads for wall and floor contact
• ຮາດແວປະກອບ ( screws , bolts , ແລະອື່ນໆ)
• ຄູ່ມືການສອນ

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

The Saris Bike Bunk is designed for quick and tool-free setup, requiring no drilling into walls.

1. ປະ​ກອບ​ພື້ນ​ຖານ​: Connect the base components to the bottom of the main vertical support pole(s) using the provided hardware. Ensure all connections are secure.
2. ຕໍາ​ແຫນ່ງ​ທີ່​ຕັ້ງ​: Place the assembled stand on a level floor surface, leaning it against a sturdy wall. The cushioned pads on the base and the top of the pole should make contact with the floor and wall, respectively, to prevent damage.
3. Attach Support Arms: Slide the adjustable bike support arms onto the vertical pole. The arms are designed to move up and down freely for height adjustment.
4. Adjust Arm Height: Before placing bikes, adjust the height of each pair of arms to best suit your bicycle frames. The arms should be positioned so that the bike's top tube rests horizontally or with a slight downward slope towards the rear wheel for stability.
5. Secure Arms: Once the desired height is achieved, tighten the locking mechanisms on the arms to secure them in place.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

To place a bicycle on the Saris Bike Bunk:

1. Lift the bicycle and position its top tube onto the protective sleeves of the support arms.
2. Ensure the bike is balanced and stable on the arms. The rubberized sleeves are designed to prevent scratching the bike frame.
3. For optimal stability, especially with bikes that have angled top tubes, adjust the arms to ensure the bike rests as level as possible.

To remove a bicycle, simply lift it off the support arms.

Storing Four Bikes (Optional)

Two Saris Bike Bunk stands can be secured back-to-back to create a freestanding unit capable of storing up to four bicycles. This configuration maximizes storage in a compact footprint.

6. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດບ່ອນຢືນດ້ວຍການໂຄສະນາamp cloth as needed to remove dust and dirt. Avoid abrasive cleaners.
• ການກວດກາ: ກວດສອບການເຊື່ອມຕໍ່ ແລະ ຮາດແວທັງໝົດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຍັງຄົງແໜ້ນໜາ ແລະ ປອດໄພ.
• ແຜ່ນປ້ອງກັນ: Inspect the cushioned pads on the arms, base, and wall contact points for wear. Replace if necessary to maintain protection.

7. ການແກ້ໄຂບັນຫາ

• ຄວາມບໍ່ໝັ້ນຄົງຂອງຂາຕັ້ງ: Ensure the stand is on a level surface and leaning firmly against a wall. Verify all assembly hardware is tightened.
• Bike Slipping/Unstable: Re-adjust the height and angle of the support arms to better fit the bike's top tube. Bikes with significantly angled top tubes may require careful positioning. Ensure the bike's weight does not exceed the arm's capacity.
• Arms Bending: If arms show signs of bending, reduce the weight of the bicycle being stored. Ensure the total weight does not exceed 40 lbs per arm or 80 lbs total for the stand.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Saris Bike Bunk 2-Bike Storage Gravity Stand comes with a ຮັບປະກັນຕະຫຼອດຊີວິດ. For warranty claims, technical support, or any questions regarding your product, please contact Saris customer service directly through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ໃນເອກະສານການຊື້ຂອງທ່ານ.