ຄູ່ມືຜູ້ໃຊ້ລະບົບເຕືອນໄພໄຮ້ສາຍ Skylink SC-1000 ຄົບຊຸດ

1. ບົດແນະນຳ

The Skylink SC-1000 Complete Wireless Alarm System is designed to provide comprehensive security for homes, offices, and businesses. Utilizing advanced rolling-code technology, this system offers enhanced security and minimizes false alarms. It is a do-it-yourself system, eliminating the need for recurring monitoring fees.

This manual provides detailed instructions for the installation, operation, and maintenance of your SC-1000 alarm system, ensuring optimal performance and reliable protection.

2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

Upon unpacking your Skylink SC-1000 system, verify that all components listed below are present:

• Alarm with Control Panel (SC-001)
• One Motion Sensor (PS-434A)
• Two Door/Window Sensors (WT-433)
• One Keychain Transmitter (4B-434)
• One Emergency Dialer (AD-433S)
• Two AC Adapters
• Three 9-volt Alkaline Batteries
• Three 12-volt Alkaline Batteries
• ສາຍໂທລະສັບ
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)
• ບັດຮັບປະກັນ

3. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ

The Skylink SC-1000 system comprises several key components that work together to provide comprehensive security. Below is an illustration of the main components included in your system:

Figure 3.1: Main components of the Skylink SC-1000 Wireless Alarm System. From top left, clockwise: SC-001 Control Panel, WT-433 Door/Window Sensors, AD-433S Emergency Dialer, 4B-434 Keychain Transmitter, PS-434A Motion Sensor.

3.1. SC-001 Control Panel

The central unit of the alarm system, featuring a keypad for arming/disarming, status indicators (AC Power, Low Battery, Arm), and mode selection (Chime, Delay, Instant). It communicates wirelessly with all sensors.

3.2. WT-433 Door/Window Sensors

These two-piece sensors are designed to detect the opening of doors or windows. When the magnetic contact is broken, a signal is sent to the control panel, triggering the alarm if the system is armed.

3.3. PS-434A Motion Sensor

A passive infrared (PIR) sensor that detects movement within its detection zone. Ideal for protecting larger areas, it triggers the alarm upon detecting unauthorized motion when the system is armed.

3.4. 4B-434 Keychain Transmitter

A portable remote control for convenient arming and disarming of the system. It allows users to control the alarm without needing to access the main control panel keypad.

3.5. AD-433S Emergency Dialer

This unit automatically dials pre-programmed phone numbers and plays a recorded emergency message when the alarm is triggered. It acts as your personal monitoring center without any monthly fees.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The SC-1000 system is designed for easy do-it-yourself installation. Follow these steps carefully to set up your alarm system.

4.1. ການເປີດພະລັງງານເບື້ອງຕົ້ນ

1. Control Panel (SC-001): Insert the 9-volt alkaline battery into the battery compartment. Connect the AC adapter to the control panel and plug it into a standard wall outlet. The "AC.PWR" indicator should illuminate.
2. Emergency Dialer (AD-433S): Insert the 9-volt alkaline battery. Connect the AC adapter and plug it into a standard wall outlet. Connect the provided phone line from the dialer to your telephone wall jack.
3. Sensors (WT-433, PS-434A): Insert the appropriate batteries (12-volt alkaline) into each sensor as per their individual instructions.

4.2. Sensor Pairing and Placement

Each sensor must be wirelessly linked to the control panel. Refer to the specific instructions for each sensor type for detailed pairing procedures. Once paired, strategically place your sensors:

• ເຊັນເຊີປະຕູ/ປ່ອງຢ້ຽມ: Mount one part on the door/window frame and the other on the moving door/window, ensuring they are aligned and within 1/2 inch of each other when closed.
• ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ: Place in a corner or elevated position to cover the desired area, avoiding direct sunlight or heat sources that could cause false alarms.

4.3. Programming the Emergency Dialer (AD-433S)

The emergency dialer can call up to nine different phone numbers and play a personalized 40-second message.

1. Record Message: Follow the dialer's instructions to record your emergency message. Ensure it clearly states the situation and requests help.
2. Program Phone Numbers: Enter up to nine contact numbers (e.g., cellular phone, pager, doctor, relatives, friends, neighbors) into the dialer's memory. The dialer will call these numbers in sequence until the message is acknowledged.

5. ການດໍາເນີນງານ

Understanding how to arm, disarm, and manage your alarm system is crucial for effective security.

5.1. ການເປີດໃຊ້ ແລະ ການປິດລະບົບ

• To Arm: Enter your personal security code on the SC-001 control panel keypad or press the arm button on the keychain transmitter. The "ARM" indicator will illuminate.
• ເພື່ອປົດອາວຸດ: Enter your personal security code on the SC-001 control panel keypad or press the disarm button on the keychain transmitter. The "ARM" indicator will turn off.

5.2. ໂໝດລະບົບ

The SC-001 control panel offers different modes to suit your security needs:

• ໂໝດກະດິ່ງ: When enabled, sensors will produce a chime sound when triggered, without activating the full alarm. Useful for knowing when a door or window is opened.
• ໂໝດທັນທີ: Any triggered sensor will immediately activate the alarm siren.
• ໂໝດລ່າຊ້າ: Provides a pre-set entry/exit delay time, allowing users to arm/disarm the system without triggering the alarm immediately upon entering or exiting.

5.3. Emergency Call Process

If any armed sensor is triggered, the following sequence occurs:

1. The 110dB siren will sound loudly.
2. The triggered sensor sends a wireless signal to the Emergency Dialer (AD-433S).
3. The AD-433S automatically dials the pre-programmed phone numbers in sequence.
4. Upon connection, your pre-recorded 40-second emergency message is played to the recipient.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and reliability of your Skylink SC-1000 system.

6.1. ການທົດແທນຫມໍ້ໄຟ

• Control Panel & Dialer: The system runs on AC power with 9-volt alkaline battery backup. A "LO BATT" indicator on the control panel and dialer will illuminate when the battery needs replacement. Replace the 9V battery promptly to maintain backup power during outages.
• ເຊັນເຊີ: Door/Window sensors and Motion sensors use 12-volt alkaline batteries. Replace them when their respective low battery indicators activate or when performance degrades.
• Keychain Transmitter: Replace the battery when the transmission range decreases or the indicator light fails to illuminate.

6.2. ການດູແລທົ່ວໄປ

• ຮັກສາສ່ວນປະກອບທັງໝົດໃຫ້ສະອາດ ແລະ ບໍ່ມີຝຸ່ນ. ໃຊ້ຜ້າອ່ອນໆ ແລະ ແຫ້ງເພື່ອທຳຄວາມສະອາດ.
• Avoid exposing components to extreme temperatures, high humidity, or direct water contact.
• Test your system periodically (e.g., monthly) to ensure all sensors are functioning correctly and the dialer can successfully make calls. Inform your programmed contacts before conducting a test.

7. ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your Skylink SC-1000 system.

7.1. System Not Arming/Disarming

• Ensure the correct security code is entered.
• Check the batteries in the keychain transmitter if using it.
• Verify the control panel has power (AC.PWR indicator).

7.2. ສັນຍານເຕືອນທີ່ບໍ່ຖືກຕ້ອງ

• ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ: Ensure it is not placed near heat sources (vents, direct sunlight) or in areas with pets that could trigger it. Adjust sensitivity if possible.
• ເຊັນເຊີປະຕູ/ປ່ອງຢ້ຽມ: Check that both parts of the sensor are securely mounted and not shifting, causing intermittent contact breaks.
• ແບັດເຕີຣີຕໍ່າ: Replace batteries in sensors or the control panel if the "LO BATT" indicator is on.

7.3. Emergency Dialer Not Calling

• Verify the phone line is securely connected to both the dialer and the wall jack.
• Ensure the dialer has power (AC.PWR indicator) and a charged backup battery.
• Confirm that phone numbers are correctly programmed into the dialer.
• Test the dialer by manually triggering the alarm and listening for dial tone/calls.
• ໝາຍເຫດ: If the phone line is cut or disconnected, the dialer cannot make calls.

7.4. Loud Beep on Arm/Disarm

The system is designed to emit a loud beep for confirmation. This is a normal operational characteristic. There is no setting to reduce this volume directly on the main unit.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

9.1. ຂໍ້ມູນການຮັບປະກັນ

The Skylink SC-1000 Complete Wireless Alarm System comes with a ຮັບປະກັນ 1 ປີ (Repair or Replace) from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2. ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, troubleshooting, or warranty inquiries, please contact Skylink customer support. Refer to the warranty card included in your package for the most current contact information.

Additional resources, including a downloadable PDF user manual, may be available on the official Skylink webເວັບໄຊທ໌ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.

You can also refer to the official user manual PDF: Skylink SC-1000 User Manual (PDF)