ໄວ້ໃຈ 12616

Trust Soundwave 1000P PC Speaker User Manual

ແບບ: 12616

ແນະນຳ

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Trust Soundwave 1000P PC Speaker system. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Trust Soundwave 1000P PC Speaker system with subwoofer and two satellite speakers

Image: The Trust Soundwave 1000P PC Speaker system, featuring a central subwoofer unit and two compact satellite speakers, designed for computer audio. The subwoofer is typically placed on the floor, while the satellite speakers are positioned on a desk.

ຄໍາແນະນໍາການຕິດຕັ້ງ

Follow these steps to correctly set up your Trust Soundwave 1000P PC Speaker system.

  1. ການຫຸ້ມຫໍ່: Carefully remove all components from the packaging. Ensure you have the subwoofer, two satellite speakers, and all necessary cables.
  2. ການຈັດວາງລຳໂພງ:
    • Place the subwoofer on the floor, preferably near your computer desk, to optimize bass response. The vertical bass reflex design benefits from clear space around it.
    • Position the two satellite speakers on your desk, equidistant from your listening position, for optimal stereo sound.
  3. ການເຊື່ອມຕໍ່ລຳໂພງດາວທຽມ: Connect the cables from the satellite speakers to the corresponding output ports on the subwoofer unit. Ensure a secure connection.
  4. Connecting to Audio Source (PC): Connect the 3.5mm audio jack cable from the subwoofer to the audio output port (usually green) on your computer's sound card.
  5. ການເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cable from the subwoofer into a standard electrical outlet.
  6. ການເປີດເຄື່ອງເບື້ອງຕົ້ນ: Turn on the speaker system using the power control, typically located on the subwoofer or a wired remote.

ປະຕິບັດການລໍາໂພງ

Once set up, you can begin using your Soundwave 1000P speakers.

  • ເປີດ/ປິດ: Use the main power switch or button to turn the system on or off. An indicator light may confirm the power status.
  • ການຄວບຄຸມລະດັບສຽງ: Adjust the overall volume using the dedicated volume knob or controls. Start with a low volume and gradually increase it.
  • ການປັບສຽງເບດ: The subwoofer features an adjustable bass control. Rotate the bass knob to achieve your desired level of deep bass.
  • 3D Sound Switch: Activate or deactivate the 3D sound feature using the designated switch. Experiment with this setting to find your preferred audio experience for different content.
  • ການປ້ອນຂໍ້ມູນສຽງ: The system primarily uses an AUX connection. Ensure your audio source is playing sound through its 3.5mm audio output.

ການບໍາລຸງຮັກສາແລະການດູແລ

ການບໍາລຸງຮັກສາທີ່ເຫມາະສົມຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງລະບົບລໍາໂພງຂອງທ່ານ.

  • ທໍາຄວາມສະອາດ:
    • ຕັດການເຊື່ອມຕໍ່ໄຟກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.
    • Use a soft, dry cloth to wipe down the speaker surfaces.
    • ຢ່າໃຊ້ນໍ້າຢາເຮັດຄວາມສະອາດ, ນໍ້າຢາສີດ ຫຼື ວັດສະດຸຂັດ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍສີຜິວ ຫຼື ອົງປະກອບພາຍໃນໄດ້.
  • ການຈັດວາງ: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
  • ການຄຸ້ມຄອງສາຍໄຟ: ຮັກສາສາຍເຄເບີນໃຫ້ສະອາດ ແລະ ຫຼີກລ່ຽງການງໍແຫຼມ ຫຼື kinks ເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ.
  • ການເກັບຮັກສາ: If storing the speakers for an extended period, disconnect them from power, clean them, and store them in a dry, cool place, preferably in their original packaging.

ຄູ່ມືແກ້ໄຂບັນຫາ

If you encounter issues with your Trust Soundwave 1000P speakers, refer to the following common problems and solutions.

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີສຽງຈາກລຳໂພງ.
  • ໄຟບໍ່ໄດ້ເຊື່ອມຕໍ່ ຫຼືເປີດ.
  • ສາຍ​ສຽງ​ຕັດ​ການ​ເຊື່ອມ​ຕໍ່​ຫຼື​ຜິດ​ພາດ​.
  • ປະລິມານຕໍ່າເກີນໄປ.
  • Incorrect audio output selected on PC.
  • Ensure power cable is securely plugged in and speakers are turned on.
  • Check 3.5mm audio cable connection to both speakers and PC. Try a different cable if available.
  • Increase speaker volume and PC volume.
  • Verify PC audio settings to ensure the correct output device is selected.
ສຽງບິດເບືອນຫຼືບໍ່ຊັດເຈນ.
  • ລະດັບສຽງສູງເກີນໄປ.
  • ຄຸນນະພາບແຫຼ່ງສຽງບໍ່ດີ.
  • ການເຊື່ອມຕໍ່ສາຍເຄເບີ້ນວ່າງ.
  • Reduce volume on both speakers and PC.
  • ທົດສອບກັບແຫຼ່ງສຽງທີ່ແຕກຕ່າງກັນຫຼື file.
  • ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດວ່າມີຄວາມແໜ້ນໜາຫຼືບໍ່.
Subwoofer ບໍ່ຜະລິດສຽງເບດ.
  • Bass control knob set too low.
  • Subwoofer not powered.
  • Increase the bass control knob on the subwoofer.
  • Ensure the subwoofer unit is receiving power and is turned on.

ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ

Key technical details for the Trust Soundwave 1000P PC Speaker system.

  • ໝາຍເລກຕົວແບບ: 12616
  • ຍີ່ຫໍ້: ໄວ້ໃຈ
  • ປະເພດລຳໂພງ: Subwoofer (2.1 system)
  • ພະລັງງານອອກສູງສຸດສູງສຸດ: 1000 ວັດ
  • RMS ວັດtage: 7 Watt (5 + 2 x 1 Watt RMS)
  • ເຕັກໂນໂລຍີການເຊື່ອມຕໍ່: AUX (jack 3.5mm)
  • ໂModeດອອກສຽງ: ສະເຕຣິໂອ
  • ແຫຼ່ງພະລັງງານ: ໄຟຟ້າມີສາຍ
  • ນ້ໍາຫນັກລາຍການ: 10 g
  • ປະເພດການຕິດຕັ້ງ: Tabletop Mount (for satellites), Floor (for subwoofer)
  • ວິທີການຄວບຄຸມ: ແຕະ

ຂໍ້ມູນການຮັບປະກັນ

ຜະລິດຕະພັນນີ້ມາພ້ອມກັບ a ການຮັບປະກັນຈໍາກັດ. For specific terms and conditions, including warranty duration and claim procedures, please refer to the warranty card included with your purchase or visit the official Trust webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Trust support webເວັບໄຊທ໌ ຫຼື ຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ໂດຍປົກກະຕິແລ້ວ ລາຍລະອຽດການຕິດຕໍ່ສາມາດພົບໄດ້ໃນເວັບໄຊທ໌ຂອງຜູ້ຜະລິດ webສະຖານທີ່ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

ກອງທຶນທາງການ Webເວັບໄຊ: www.trust.com

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 12616

ກ່ອນview ຄູ່ມືການຕິດຕັ້ງລຳໂພງ TYTAN 2.1 ແບບໄວ
ຄູ່ມືການຕິດຕັ້ງດ່ວນສຳລັບຊຸດລຳໂພງ Trust TYTAN 2.1, ລາຍລະອຽດການຕັ້ງຄ່າ, ການເຊື່ອມຕໍ່ສຽງ, ພະລັງງານ, ການຈັບຄູ່ໄຮ້ສາຍ, ແລະ ໂໝດ ECO ສຳລັບອຸປະກອນ Windows ແລະ Bluetooth.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງຊຸດລຳໂພງ Trust Vigor 2.0 ແບບດ່ວນ
ຄູ່ມືການຕິດຕັ້ງແບບໄວສຳລັບຊຸດລຳໂພງ Trust Vigor 2.0, ເຊິ່ງໃຫ້ຄຳແນະນຳໃນການຕິດຕັ້ງ ແລະ ການເຊື່ອມຕໍ່ສຳລັບຜູ້ໃຊ້ PC ແລະ ແລັບທັອບ. ລວມມີລາຍລະອຽດກ່ຽວກັບການເຊື່ອມຕໍ່ຜ່ານ USB ແລະ ຊ່ອງສຽບສຽງ, ແລະ ການເລືອກອຸປະກອນໃນ Windows.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງລຳໂພງ Avora 2.1 ແບບໄວ
ຄູ່ມື HTML ທີ່ກະທັດຮັດ ແລະ ເໝາະສົມກັບ SEO ສຳລັບການຕັ້ງຄ່າຊຸດລຳໂພງ Trust Avora 2.1, ເຊິ່ງກວມເອົາການຄວບຄຸມລະດັບສຽງ/ເບດ, ການຕັ້ງຄ່າທາງກາຍະພາບ, ການເຊື່ອມຕໍ່ສຽງ/ພະລັງງານ, ແລະ ການຕິດຕັ້ງ Windows.
ກ່ອນview ຊຸດລຳໂພງ Trust Arys 2.0: ຄູ່ມືຕິດຕັ້ງດ່ວນ
ຄູ່ມືການຕິດຕັ້ງແບບໄວໆທີ່ຄົບຖ້ວນສຳລັບຊຸດລຳໂພງ Trust Arys 2.0 (14W, ຮຸ່ນ 20179). ຮຽນຮູ້ວິທີເຊື່ອມຕໍ່, ເປີດເຄື່ອງ ແລະ ຕັ້ງຄ່າລຳໂພງຂອງທ່ານກັບ PC ຫຼື ອຸປະກອນອື່ນໆຂອງທ່ານ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງລຳໂພງ Trust 2.1 ແບບດ່ວນ
ຄູ່ມືການຕິດຕັ້ງແບບໄວສຳລັບຊຸດລຳໂພງ Trust 2.1, ລາຍລະອຽດການຕັ້ງຄ່າ, ການເຊື່ອມຕໍ່ສຽງ, ການເປີດເຄື່ອງ, ແລະ ການຄວບຄຸມລະດັບສຽງ. ລວມມີຂໍ້ມູນກ່ຽວກັບການຕິດຕັ້ງ Windows ແລະ ໂໝດ ECO.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ຊຸດລຳໂພງເກມ Trust GXT 611 Wezz
ຄູ່ມືຜູ້ໃຊ້ສຳລັບຊຸດລຳໂພງເກມ Trust GXT 611 Wezz, ເຊິ່ງມີລາຍລະອຽດການຕັ້ງຄ່າ ແລະ ການໃຊ້ງານ. ລວມມີຂໍ້ມູນກ່ຽວກັບການເຊື່ອມຕໍ່, ພະລັງງານ, ແລະ ໄຟ RGB.