Presto EverSharp Electric Knife Sharpener (Model 08800) User Manual

ແນະນຳ

The Presto EverSharp Electric Knife Sharpener (Model 08800) provides an efficient and automatic method for sharpening most non-serrated kitchen and sport knives. This two-stage system is designed to precision grind a perfect sharpening angle and then fine hone and polish the edge, delivering professional results for home use.

ຮູບ 1: ດ້ານຫນ້າ view of the Presto EverSharp Electric Knife Sharpener.

ການປົກປ້ອງທີ່ສໍາຄັນ

ເມື່ອນຳໃຊ້ເຄື່ອງໃຊ້ໄຟຟ້າ, ຄວນລະວັງຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີ ເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຟ້າຊ໋ອດ ແລະ ການບາດເຈັບຕໍ່ຄົນ, ລວມທັງສິ່ງຕໍ່ໄປນີ້:

• Read all instructions before using the sharpener.
• To protect against electrical hazards, do not immerse the sharpener in water or other liquids.
• ຖອດປລັກອອກຈາກປລັກສຽບໃນເວລາທີ່ບໍ່ໄດ້ໃຊ້, ກ່ອນທີ່ຈະໃສ່ຫຼືຖອດອອກ, ແລະກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.
• ຫຼີກເວັ້ນການສໍາຜັດກັບພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
• ຫ້າມໃຊ້ອຸປະກອນທີ່ມີສາຍໄຟ ຫຼືປລັກສຽບເສຍຫາຍ, ຫຼື ຫຼັງຈາກເຄື່ອງໃຊ້ຜິດປົກກະຕິ ຫຼື ຕົກ ຫຼື ເສຍຫາຍໃນທາງໃດກໍ່ຕາມ. ສົ່ງຄືນເຄື່ອງໃຊ້ກັບສະຖານທີ່ບໍລິການທີ່ໄດ້ຮັບອະນຸຍາດທີ່ໃກ້ທີ່ສຸດສໍາລັບການກວດສອບ, ການສ້ອມແປງ, ຫຼືການປັບໄຟຟ້າຫຼືກົນຈັກ.
• ການນໍາໃຊ້ໄຟລ໌ແນບທີ່ບໍ່ແນະນໍາຫຼືຂາຍໂດຍຜູ້ຜະລິດເຄື່ອງໃຊ້ອາດຈະເຮັດໃຫ້ເກີດໄຟໄຫມ້, ໄຟຟ້າຊອດ, ຫຼືການບາດເຈັບ.
• ຢ່າໃຊ້ນອກ.
• ຢ່າປ່ອຍໃຫ້ສາຍໄຟແຂວນໃສ່ຂອບໂຕະ ຫຼືໂຕະ, ຫຼືແຕະພື້ນຜິວທີ່ຮ້ອນ.
• ເຄື່ອງໃຊ້ນີ້ມີຈຸດປະສົງເພື່ອໃຊ້ໃນຄົວເຮືອນເທົ່ານັ້ນ.
• Always ensure the sharpener is placed on a stable, flat surface before use. The non-slip base helps secure the unit during operation.

ຕັ້ງຄ່າ

1. Unpack the knife sharpener and place it on a clean, dry, and stable countertop.
2. Ensure the power switch is in the "OFF" (O) position.
3. ສຽບສາຍໄຟເຂົ້າໄປໃນປລັກສຽບໄຟຟ້າ AC 120 ໂວນມາດຕະຖານ.
4. Verify the non-slip suction cups on the base are securely attached to the countertop to prevent movement during sharpening.

ຮູບທີ 2: ດ້ານລຸ່ມ view of the sharpener, highlighting the non-slip suction cups for stability.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Presto EverSharp features a two-stage sharpening system. Stage 1 is for precision grinding, and Stage 2 is for fine honing and polishing. Always sharpen non-serrated knives. For serrated knives, refer to the specific instructions below.

Sharpening Non-Serrated Knives

1. Turn the sharpener ON by pressing the power switch to the "I" position. The sharpening wheels will begin to rotate.
2. Stage 1 - Coarse Sharpening: Insert the knife blade into the left slot of Stage 1 (marked '1'). Hold the knife with the blade perpendicular to the sharpener and pull it towards you with light, even pressure. The precision blade guides will automatically position the knife at the ideal sharpening angle.
3. Repeat this process 3-4 times for each side of the blade, alternating between the left and right slots of Stage 1. Ensure you pull the entire length of the blade through the slot, from heel to tip.
4. Stage 2 - Fine Honing: ຍ້າຍໄປ Stage 2 (marked '2'). Insert the knife blade into the left slot of Stage 2. Again, pull the knife towards you with very light pressure, allowing the Sapphirite wheels to fine hone and polish the edge.
5. Repeat this 3-4 times for each side of the blade, alternating between the left and right slots of Stage 2. ນີ້ stage refines the edge for a razor-sharp finish.
6. After sharpening, turn the sharpener OFF (O) and carefully wipe the blade with a damp ຜ້າເພື່ອເອົາເອກະສານໂລຫະໃດໆ.

Figure 3: Demonstrating how to hold and guide a knife through the sharpening slot.

Figure 4: Close-up of the power switch, indicating ON/OFF positions.

ມີດຕັດແຫຼມ

This sharpener can be used for non-electric serrated knives that are only serrated on one side. For these knives, only use Stage 2 (fine honing) and only sharpen the non-serrated side of the blade. Do not attempt to sharpen the serrated edge.

1. Turn the sharpener ON.
2. Insert the non-serrated side of the blade into the appropriate slot of Stage 2 (marked '2').
3. Pull the knife towards you with light pressure, ensuring only the non-serrated edge makes contact with the sharpening wheel.
4. ເຮັດຊ້ໍາອີກ 3-4 ເທື່ອ.
5. Turn the sharpener OFF and clean the blade.

ຄໍາແນະນໍາທີ່ເປັນປະໂຫຍດ

• Always use light pressure. Excessive pressure can slow the motor and damage the blade.
• Maintain a consistent speed when pulling the knife through the slots.
• For very dull knives, you may need additional passes through Stage 1 ກ່ອນທີ່ຈະຍ້າຍໄປ Stagແລະ 2.
• Sparks may occur when sharpening high carbon steel knives; this is normal.

ການບໍາລຸງຮັກສາແລະການທໍາຄວາມສະອາດ

Regular cleaning ensures optimal performance and longevity of your sharpener.

1. Always unplug the sharpener before cleaning.
2. Wipe the exterior of the sharpener with a damp ຜ້າ. ຢ່າເອົາຫົວຫນ່ວຍໃສ່ໃນນ້ໍາ.
3. The sharpener is equipped with receptacles underneath to catch metal filings. To clean, remove the red plugs on the bottom of the unit and empty the filings. Replace the plugs securely after cleaning.
4. Do not attempt to lubricate the sharpening wheels or any other part of the sharpener.

ການແກ້ໄຂບັນຫາ

• Sharpener does not turn on: Ensure the power cord is securely plugged into a working electrical outlet and the power switch is in the "I" (ON) position.
• Knife not sharpening effectively:
  • Ensure you are using light, consistent pressure. Too much pressure can hinder sharpening.
  • Verify you are pulling the knife through the correct slots for Stage 1 ແລະ Stagແລະ 2.
  • For very dull knives, more passes through Stage 1 may be required.
  • Ensure the knife is non-serrated, or if serrated, only the non-serrated side is being sharpened in Stagແລະ 2.
• Excessive sparks: While normal for high carbon steel, ensure you are not applying excessive downward pressure.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Presto EverSharp Electric Knife Sharpener (Model 08800) comes with a 1-year limited warranty against defects. For warranty claims or product support, please refer to the contact information provided in your product packaging or visit the official Presto webເວັບໄຊ.