UWANT D500 ເຄື່ອງດູດຝຸ່ນແຫ້ງແບບບໍ່ມີສາຍ

1. ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

Before using this device, please read all the contents of this manual carefully, install the device according to the operating steps in this manual, and keep the manual properly. Any operation inconsistent with the instructions in this manual may result in product damage or serious personal injury. This device is only suitable for operation in a domestic environment and is not suitable for industrial or outdoor use.

⚠ ຄຳເຕືອນ

• The device is not suitable for individuals with physical, sensory or intellectual impairments, or individuals lacking experience and common sense (including children), unless they are supervised or guided by a guardian to ensure safe use of the device.
• Do not touch the plug or any live part of the device with wet hands to avoid the risk of electric shock.
• If the charger or plug is damaged, please stop using it and call our professional service personnel to replace it to avoid accidents.
• Please keep long hair, loose clothing, fingers and other parts of the body away from the airflow channels and moving parts of this device.
• Do not insert metal shavings, pins, wires and other objects into the gaps of the device to prevent electric shock and accidental injury.
• Except for qualified technical personnel, others are not allowed to disassemble, repair or modify.
• If you do not use this device for a long time, please unplug it to avoid electric leakage, fire, malfunction, etc.
• If any abnormality is found during use of the device, please cut off the power immediately and call our after-sales office.
• After using this device, please clean the wastewater tank in time to keep the ventilation path unobstructed and avoid blockage, or it will cause the suction to decrease and the motor to heat up, thus affecting the service life of the device.
• After using the device, please store it in a dry place. Humid places will affect the insulation and service life of electrical appliances.
• ຮ່າງກາຍຂ້າງເທິງໂລໂກ້ຂອງອຸປະກອນ, ແລະພື້ນຖານປະກອບດ້ວຍອົງປະກອບໄຟຟ້າບໍ່ສາມາດແຊ່ນ້ໍາຫຼືລ້າງອອກໄດ້.
• Please check the smoothness of the floor brush elbow regularly. If there is any debris blocked, please use a multi-functional brush to clean it in time to avoid blockage, or it will cause a decrease in suction and affect the service life of the device.
• Before replacing the roller brush, make sure the device is turned off.
• When using this device, you need to add the cleaning agent provided or specified by our company. Please add it according to the specified proportion to prevent excessive foam, which may penetrate into the motor and reduce its lifespan.
• ເທັກໂນໂລຍີ ແລະຂໍ້ມູນທັງໝົດທີ່ສະແດງຢູ່ໃນຄູ່ມືສະບັບນີ້ແມ່ນໄດ້ມາໂດຍບໍລິສັດຂອງພວກເຮົາ ຫຼືອົງການທົດສອບພາກສ່ວນທີສາມທີ່ກຳນົດໄວ້, ແລະບໍລິສັດຂອງພວກເຮົາສະຫງວນສິດສຸດທ້າຍໃນການຕີຄວາມໝາຍ.

⚠ Safe disposal methods of waste batteries

• The battery installed in the appliance contains materials that are harmful to the environment. When discarding the appliance, the battery must be removed from the appliance.
• Before taking out the battery, the appliance must be powered off.
• Please dispose of waste batteries safely and properly, and do not throw them into fire, water or soil.
• ຖ້າແບດເຕີຣີຂອງເສດເຫຼືອຮົ່ວໄຫຼແລະຕິດຕໍ່ກັບຜິວຫນັງຫຼືເຄື່ອງນຸ່ງຂອງເຈົ້າ, ກະລຸນາລ້າງມັນດ້ວຍນ້ໍາສະອາດເພື່ອຫຼີກເວັ້ນການບໍ່ສະບາຍຂອງຜິວຫນັງແລະໄປຫາການປິ່ນປົວທັນທີ.

2. ຜະລິດຕະພັນເກີນview

ຊື່ສ່ວນ

The UWANT D500 Cordless Wet Dry Vacuum Cleaner consists of several key components:

• ຫົວໜ່ວຍຫຼັກ: The primary body of the vacuum cleaner.
• ມືຈັບ: For operating and maneuvering the device.
• ຈໍສະແດງຜົນ: LED screen providing real-time information.
• Self-cleaning button/Water volume control button: Controls self-cleaning and water flow.
• Voice broadcast volume control button: Adjusts the volume of voice prompts.
• Clean water/wastewater tank: Integrated tank for both clean and dirty water.
• Roller brush window: Transparent cover for the roller brush.
• Electrolyzed water window: Displays the electrolyzed water process.
• ແປງມ້ວນ: The main cleaning component.
• Smart Base: Charging and self-cleaning station.
• ກອງ HEPA: For air filtration.
• Roller brush assembly: The complete roller brush unit.
• Wastewater tank component upper cover + solid-liquid separation: Part of the wastewater tank system.
• ການແກ້ໄຂຄວາມສະອາດ: Specialized cleaning agent.
• ເຄື່ອງ​ມື​ທໍາ​ຄວາມ​ສະ​ອາດ​: For maintenance and cleaning of components.

LED Screen and Mode Indicators

The LED screen displays battery level, current cleaning mode (Smart, MAX, Dry), and electrolyzed clean status. Voice prompts provide alerts for low battery, full wastewater tank, and other operational statuses.

3. ຕັ້ງຄ່າ

ຈັດການການຕິດຕັ້ງ

1. Insert the end of the handle into the port of the main unit in the vertical direction until a "click" sound is heard. Ensure the handle is tight and not loose.
2. To disassemble, insert a hard object into the hole shown in the figure (refer to PDF page 6, image 2), press the pin, and pull the handle upward simultaneously.

Note: Do not remove the sticker from the handle hole.

Adding Clean Water

1. Press the wastewater tank unlock button to remove the clean water/wastewater tank assembly.
2. Open the water filling plug and inject clean water up to the water level indicator.
3. Tightly cover the water filling plug to ensure it is secure.
4. Install the clean water/wastewater tank assembly back into the body until a “click” sound indicates successful installation.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

ກ່ອນ​ການ​ນໍາ​ໃຊ້​ຄັ້ງ​ທໍາ​ອິດ​

Before use, please check whether your floor scrubber has power. If the power is insufficient, charge it in time (refer to the charging guide for details) and use after it is fully charged.

Starting the Device and Cleaning Modes

The default mode is Smart mode when the scrubber is turned on. You can switch between modes by pressing the Mode button:

• Smart Mode: Default mode for general cleaning.
• ໂໝດ MAX: Press the Mode button once to switch to MAX mode for stubborn stains.
• Dry Suction Mode: Press the Mode button again from MAX mode to enter dry suction mode for liquids without scrubbing.
• Press the Mode button again from Dry Suction mode to return to Smart mode.

The device comes with an upright switch. Tilt it to use after turning it on. When scrubbing under tables, coffee tables, or beds, it can be used lying flat (180° Ultra Lay-Flat).

Advanced Cleaning Technologies

• ພະລັງງານດູດ 17,000 Pa: Provides strong suction for effective cleaning.
• Z-Comb Anti-Tangle Technology: Keeps the brush head clean and free from tangled hair and fibers.

• PureScent Guard+: Deodorizing particles prevent odors from spreading. (Note: additional purchase required)

• Electrolyzed Water Sterilization: Generates sterile, electrolyzed water in real-time, eliminating harmful bacteria and germs with 99.99% sterilization rate.

ວິດີໂອສາທິດຜະລິດຕະພັນ

5. ບໍາລຸງຮັກສາ

ການທໍາຄວາມສະອາດຮ່າງກາຍຕົ້ນຕໍ

Before cleaning, ensure the device is turned off. Scrub the device body with water or a neutral detergent. Wring out the cleaning cloth thoroughly before scrubbing. Do not allow water to flow into the inside of the device.

Emptying the Wastewater Tank

1. Press the unlock button of the wastewater tank and remove the wastewater tank.
2. Hold the wastewater tank with one hand and pull out the drain basket assembly upward with the other hand.
3. After draining the wastewater, install the drain basket assembly back into the body.

Cleaning the Wastewater Sensor

If the sensor is clogged or the device is shut down, remove the wastewater tank assembly. Use the provided cleaning tool and clean water to clean the wastewater pipes and HEPA. After cleaning, put it back into the wastewater tank.

Self-Cleaning and Hot Air Drying

Place the device back onto the smart base after use. Ensure the clean water tank is sufficiently filled and the dirty water tank is empty. The machine will automatically start self-cleaning after 10 seconds. You can also press the self-cleaning button to start the process manually. Once roller brush cleaning is complete, the machine will automatically enter the drying mode.

• The drying mode time is ≤60 minutes. If you remove the device during drying, the drying stops, and you can use the device normally.
• ຫຼັງຈາກການທໍາຄວາມສະອາດຕົນເອງສໍາເລັດ, ກະລຸນາເຮັດຄວາມສະອາດຖັງນ້ໍາເສຍ.

Cleaning the Water Suction Port

1. After removing the transparent window of the roller brush, press the roller brush unlock button and follow the direction of the arrow to pull out the roller brush.
2. Rinse the suction port with clean water.
3. ຫຼັງ​ຈາກ​ການ​ທໍາ​ຄວາມ​ສະ​ອາດ​ໄດ້​ສໍາ​ເລັດ​, ການ​ຕິດ​ຕັ້ງ​ແປງ roller ແລະ​ປ່ອງ​ຢ້ຽມ​ແປງ roller ເຂົ້າ​ໄປ​ໃນ​ອຸ​ປະ​ກອນ​.

Note: Please clean the debris on the roller brush regularly, remove the roller brush, and use the cleaning tool to clean the garbage on the roller brush to avoid affecting the cleaning effect.

Cleaning the Smart Base

Wipe the smart base with tissue or a wet wipe.

ໝາຍເຫດ:

• The body above the device logo, and the base contain electrical components and cannot be soaked in water or rinsed.
• ຮ່າງກາຍຢູ່ດ້ານລຸ່ມຂອງໂລໂກ້ອຸປະກອນ, ແປງພື້ນ, ແລະຖາດສະຖານີຖານສາມາດລ້າງໂດຍກົງ, ແຕ່ບໍ່ສາມາດແຊ່ນ້ໍາໄດ້.

ກຳລັງສາກໄຟ

After using the device, push it into the smart base. First, push the device into the smart base, and insert the plug of the smart base into the socket. During the charging process, keep the device upright and close to the wall to avoid tripping and other injuries. When charging is not needed, pull out the plug and put it away.

⚠ Warning: If the device is not used for a long time, please use the smart base equipped to charge the battery for 3 hours (no need to fully charge) every 3 months to avoid battery damage.

6. ການແກ້ໄຂບັນຫາ

Please check the following points before entrusting it for repair.

ຖ້າມີຂໍ້ບົກພ່ອງອື່ນໆ, ເຄື່ອງມືພິເສດແມ່ນຕ້ອງການ, ດັ່ງນັ້ນທ່ານຕ້ອງໄປຫາສູນບໍລິການທີ່ກໍານົດສໍາລັບການສ້ອມແປງແລະທົດແທນ.

7. ຂໍ້ມູນຈໍາເພາະ

*Data provided is based on tests conducted by the UWANT laboratory under full power conditions. Results are for reference only.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The UWANT cordless floor cleaner comes with a two-year warranty. If you have any questions regarding spare parts or customer service, please contact the after-sales office. They will respond within 24 hours.

ສຳລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ທ່ານອາດຈະອ້າງອີງເຖິງຄູ່ມືຜູ້ໃຊ້ຢ່າງເປັນທາງການ PDF: UWANT D500 User Manual (PDF)

9. ຄໍາແນະນໍາຜູ້ໃຊ້

• For optimal performance, ensure the clean water tank is filled and the dirty water tank is emptied before each use.
• Regularly clean the roller brush and wastewater tank components to maintain suction power and device longevity.
• While primarily designed for hard floors, for carpet cleaning, it is recommended to check the manufacturer's guidelines or test on an inconspicuous area first, as wet cleaning may not be suitable for all carpet types.
• Utilize the different cleaning modes (Smart, MAX, Dry) according to the type and severity of the mess for the most effective cleaning.

10. ວັດຖຸອັນຕະລາຍ

The following table indicates the presence of hazardous substances in the product components:

Legend: X indicates that the hazardous substance is present in the component. O indicates that the hazardous substance is not present in the component.