ANNKE 5MP Wireless Security Camera Kit

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your ANNKE 5MP Wireless Security Camera Kit. This system offers advanced surveillance features including 5MP resolution, human detection, two-way audio, and a convenient 12-inch LCD monitor for local viewing. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. ຜະລິດຕະພັນເກີນview

2.1. ສ່ວນປະກອບ

Your ANNKE Wireless Security Camera Kit includes the following main components:

• 12-inch LCD Monitor NVR (Network Video Recorder)
• 5MP Wireless IP Cameras (quantity varies by kit: 4, 6, 8, or 10 cameras)
• ຕົວແປງໄຟສໍາລັບ NVR ແລະກ້ອງຖ່າຍຮູບ
• ເມົາສ໌ USB
• Screws ແລະ Anchors
• Ethernet Cable (for NVR connection to router, if wired connection is preferred)

Note: A 2.5-inch hard drive for storage is NOT included and must be purchased separately.

2.2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• ຈໍສະແດງຜົນແບບປະສົມປະສານ: 12-inch LCD screen on the NVR for direct local monitoring.
• ຄວາມລະອຽດສູງ: 5MP (2K FHD) video for clear viewing, recording, and playback.
• ການເຊື່ອມຕໍ່ແບບໄຮ້ສາຍ: Real plug-and-play system with dual-band 2.4G/5G Wi-Fi support.
• ການບີບອັດທີ່ມີປະສິດທິພາບ: Advanced H.264+ Video Compression for optimized storage.
• ລະບົບຂະຫຍາຍໄດ້: NVR supports up to 10 channels for 5MP wireless IP camera access.
• ສຽງສອງທາງ: Built-in microphone and speaker on cameras for voice intercom.
• ການກວດຫາອັດສະລິຍະ: Human Detection with instant email alerts.
• ຜົນຜະລິດທີ່ຫຼາກຫຼາຍ: HDMI output supporting up to 4K resolution for external monitors.
• ການເຂົ້າເຖິງໄລຍະໄກ: Simple-to-use mobile app for remote monitoring.
• ວິໄສທັດກາງຄືນ: True day and night continuous protection with up to 100ft (30m) night vision and Smart IR.
• ການອອກແບບທົນທານ: IP66 weatherproof cameras suitable for indoor and outdoor use.
• ການເກັບຮັກສາແບບຍືດຫຍຸ່ນ: NVR supports a maximum 256GB TF card and up to 6TB 2.5-inch HDD.
• ການຄວບຄຸມຄວາມເປັນສ່ວນຕົວ: Configure up to 4 privacy masking areas per camera.
• ການເຊື່ອມໂຍງເຮືອນອັດສະລິຍະ: Works with Alexa for voice control.
• ການຫຼິ້ນທີ່ສະຫລາດ: Smart Human Playback feature for efficient review ຂອງ footage.

3. ຄູ່ມືການຕິດຕັ້ງ

3.1. ການຫຸ້ມຫໍ່ແລະການກວດກາເບື້ອງຕົ້ນ

Carefully unpack all components and check against the packing list. Ensure all items are present and undamaged. If any items are missing or damaged, contact customer support.

3.2. ການຕິດຕັ້ງຮາດດິດ (ທາງເລືອກ)

If your NVR did not come with a pre-installed hard drive, you will need to install a 2.5-inch SATA HDD (up to 6TB) for video recording. Refer to the NVR's internal diagram or specific instructions for opening the NVR casing and connecting the HDD. Ensure the NVR is powered off before installation.

3.3. NVR Connections

The NVR is designed for easy setup. Follow these steps:

1. ພະລັງງານ: Connect the NVR power adapter to the NVR's power port and then to a power outlet.
2. ຫນູ: Connect the included USB mouse to one of the USB ports on the NVR.
3. ຜົນຜະລິດ HDMI (ທາງເລືອກ): ຖ້າທ່ານຕ້ອງການ view ຟູtage on an external monitor or TV, connect an HDMI cable from the NVR's HDMI output port to your external display. The NVR supports up to 4K output.
4. ເຄືອຂ່າຍ (ທາງເລືອກ): ສໍາລັບໄລຍະໄກ viewing and internet features, connect an Ethernet cable from the NVR's RJ45 port to your router. The system also supports wireless connection to your network.

3.4. ການຕິດຕັ້ງກ້ອງຖ່າຍຮູບ ແລະ ພະລັງງານ

Your cameras are designed for plug-and-play operation. They should automatically connect to the NVR once powered on.

1. ການຕິດຕັ້ງ: Choose suitable locations for your cameras, ensuring good coverage and a stable mounting surface. Use the provided 3-axis mounting bracket, screws, and anchors to securely install each camera.
2. ພະລັງງານ: ເຊື່ອມຕໍ່ແຕ່ລະກ້ອງຖ່າຍຮູບກັບອະແດັບເຕີໄຟຂອງມັນ ແລະສຽບໃສ່ປລັກສຽບໄຟ.
3. ການເຊື່ອມຕໍ່ໄຮ້ສາຍ: The cameras will automatically attempt to connect to the NVR wirelessly. Ensure the NVR is within range of the cameras. The system supports dual-band Wi-Fi (2.4G/5G).

3.5. ການຕິດຕັ້ງແອັບຯມືຖື

To access your security system remotely, download the official ANNKE mobile application from your device's app store. Follow the in-app instructions to add your NVR system. This typically involves scanning a QR code on the NVR or manually entering device details.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1. ມີຊີວິດ View ແລະ Playback

• ທ້ອງຖິ່ນ Viewໃນ: The 12-inch LCD screen on the NVR provides a direct live view of all connected cameras. Use the USB mouse to navigate the NVR interface, switch camera views, and access settings.
• ໄລຍະໄກ Viewໃນ: Use the ANNKE mobile app to view live feeds from your cameras anywhere, anytime.
• ຫຼິ້ນຄືນ: ການເຂົ້າເຖິງບັນທຶກ footage through the NVR interface or the mobile app. The 'Smart Human Playback' feature allows you to quickly filter and review events where human motion was detected.

4.2. ສຽງສອງທາງ

Each camera is equipped with a microphone and speaker, enabling two-way audio communication. Through the NVR interface or mobile app, you can listen to audio from the camera's location and speak through the camera's speaker.

4.3. ກວດຈັບການເຄື່ອນໄຫວ ແລະການແຈ້ງເຕືອນ

The system features advanced human detection. When human motion is detected, the system can send instant email alerts to your configured address. You can customize detection zones and sensitivity settings via the NVR or mobile app.

4.4. ການປິດບັງຄວາມເປັນສ່ວນຕົວ

To protect privacy in sensitive areas, you can configure up to 4 privacy masking zones for each camera. These zones will be blacked out in live view ແລະການບັນທຶກ.

4.5. ການເຊື່ອມໂຍງ Alexa

Your ANNKE system can integrate with Amazon Alexa. Follow the instructions in the ANNKE app to link your system with Alexa, allowing you to view camera feeds on compatible Alexa-enabled devices using voice commands.

5. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດປົກກະຕິ: Periodically clean the camera lenses and NVR screen with a soft, dry cloth to ensure clear images. For outdoor cameras, remove any dirt, dust, or cobwebs.
• ການອັບເດດເຟີມແວ: Check the ANNKE website or mobile app for available firmware updates for your NVR and cameras. Keeping your firmware up-to-date ensures optimal performance and security.
• ກວດສອບການເຊື່ອມຕໍ່: Regularly inspect all power and network connections to ensure they are secure and free from damage.
• ສຸຂະພາບຮາດດິດ: If you have installed an HDD, monitor its health through the NVR settings. Consider backing up important footage ເປັນໄລຍະ.
• ການປົກປ້ອງສິ່ງແວດລ້ອມ: While cameras are IP66 weatherproof, extreme weather conditions can still affect performance. Ensure cameras are mounted securely to withstand wind and rain.

6. ການແກ້ໄຂບັນຫາ

6.1. No Image on NVR Screen / External Monitor

• ກວດສອບພະລັງງານ: Ensure the NVR and all cameras are properly powered on and their power adapters are securely connected to outlets.
• ການເຊື່ອມຕໍ່ HDMI: If using an external monitor, verify the HDMI cable is securely connected to both the NVR and the monitor, and the monitor is set to the correct input source.
• ການເຊື່ອມຕໍ່ກ້ອງຖ່າຍຮູບ: Confirm cameras are within wireless range of the NVR and have successfully paired. You may need to re-pair cameras if they lose connection.

6.2. ບໍ່ມີການບັນທຶກສຽງ

• ຮາດ​ດິດ​: Ensure a 2.5-inch SATA hard drive is correctly installed and formatted in the NVR. Check the NVR settings to confirm the HDD status.
• ກຳ ນົດການບັນທຶກ: Verify that the recording schedule is properly configured in the NVR settings.
• ກວດຈັບການເຄື່ອນໄຫວ: If recording is based on motion, check motion detection settings and sensitivity.

6.3. Remote Access Issues

• ການເຊື່ອມຕໍ່ເຄືອຂ່າຍ: Ensure the NVR is connected to the internet (either via Ethernet cable to your router or wirelessly). Check your router's internet connection.
• ການຕັ້ງຄ່າແອັບ: Double-check that the NVR is correctly added to your ANNKE mobile app.
• ການຕັ້ງຄ່າໄຟວໍ/ເຣົາເຕີ: Your router's firewall or network settings might be blocking access. Consult your router's manual or ISP for assistance with port forwarding or UPnP settings if necessary.

6.4. ການແຈ້ງເຕືອນການເຄື່ອນໄຫວທີ່ບໍ່ຖືກຕ້ອງ

• ຄວາມອ່ອນໄຫວ: ປັບຄວາມອ່ອນໄຫວຂອງການກວດຈັບການເຄື່ອນໄຫວໃນການຕັ້ງຄ່າ NVR ຫຼື ແອັບ.
• ເຂດກວດຫາ: Refine the motion detection zones to exclude areas with frequent irrelevant movement (e.g., trees swaying, busy roads).
• ການປົກປິດຄວາມເປັນສ່ວນຕົວ: Utilize privacy masking for areas that should not trigger alerts.

7. ຂໍ້ມູນຈໍາເພາະ

8. ຄໍາແນະນໍາຜູ້ໃຊ້

• ການຈັດວາງ Wi-Fi ທີ່ດີທີ່ສຸດ: For best wireless performance, try to place the NVR centrally within the camera coverage area and avoid major obstructions like thick walls or large metal objects.
• ລະຫັດຜ່ານທີ່ປອດໄພ: Always change default passwords for your NVR and mobile app account to strong, unique passwords to prevent unauthorized access.
• Backup ປົກກະຕິ: If critical footage is stored, consider regularly backing up data from the NVR to an external USB drive or cloud storage (if supported).
• ທົດສອບການແຈ້ງເຕືອນ: After setting up motion detection and email alerts, perform a test to ensure notifications are being received correctly.
• ວົງຈອນພະລັງງານ: If you experience minor glitches or connectivity issues, a simple power cycle (unplugging and replugging the power for both NVR and cameras) can often resolve the problem.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please refer to the official ANNKE website or contact their customer service directly. Keep your purchase receipt and product model number (N48WEE0-I51CN) handy when contacting support.