ຄູ່ມື+

BFT Mitto B RCB02 R1, RCB04 R2, MITTO 2, 4, MITTO2A, MITTO4A, KLEIO B RCA 02/04

BFT Mitto Series Garage Door Remote Control Instruction Manual

Models: Mitto B RCB02 R1, RCB04 R2, MITTO 2, 4, MITTO2A, MITTO4A, KLEIO B RCA 02/04

1. ບົດແນະນຳ

This manual provides instructions for the setup, operation, and maintenance of your BFT Mitto series garage door remote control. These remotes are designed for use with compatible BFT receivers, operating on a 433.92MHz frequency with rolling code technology. Please read these instructions carefully before attempting to program or use your new remote control.

Multiple BFT remote controls, indicating available quantities of 10, 20, or 30 pieces.
Figure 1: BFT Mitto Series Remote Controls (available in various pack sizes)

2. ຮູບແບບທີ່ເຂົ້າກັນໄດ້

Your new remote control is compatible with the following BFT models:

  • ມິດໂຕ 2 / ມິດໂຕ 4
  • ມິດໂຕ2ມ / ມິດໂຕ4ມ
  • MITTO B RCB 02
  • MITTO B RCB 04
  • KLEIO B RCA 02
  • KLEIO B RCA 04
  • TRC1 / TRC2 / TRC4

ໝາຍເຫດສຳຄັນ: Access to your receiver/opener is required for programming. Please ensure you have physical access to the receiver before purchasing or attempting to program the remote.

A BFT remote control shown alongside several older remote models and a battery, illustrating its compatibility as a replacement.
Figure 2: BFT Remote Control and compatible older models
Image showing two remote controls labeled 'MITTO COOL C2' and 'MITTO COOL C4' with red 'X' marks, indicating they are not compatible.
Figure 3: Incompatible models (MITTO COOL C2 and C4)

3. ຄຸນສົມບັດ

  • ໄລຍະໄກທົດແທນ: Ideal for replacing lost or damaged original BFT remote controls.
  • ການ​ຈັບ​ຄູ່​ງ່າຍ​ດາຍ​: Designed for straightforward programming with your existing BFT receiver.
  • Rolling Code Technology: Provides enhanced security for your garage door or gate.
  • ລະຍະຍາວ: Operates effectively within a range of 30m-50m in open areas.
  • ແບັດເຕີຣີທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ: Comes with a battery included for immediate use after programming.
A hand holding the BFT remote control, with thought bubbles showing a gate, a barrier, and another gate, illustrating its use for various access systems.
Figure 4: Remote control application examples

4. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ຍີ່ຫໍ້BFT
Type of Programmingການຂຽນໂປຣແກຣມດ້ວຍຕົວຮັບ
ຄວາມຖີ່433.92MHz
ວິທີການເຂົ້າລະຫັດລະຫັດມ້ວນ
ປຸ່ມ2 ຫຼື 4
ຊ່ວງ30m-50m (open area)
ແບັດເຕີຣີລວມ
ການຢັ້ງຢືນCE
ຕົ້ນກໍາເນີດຈີນແຜ່ນດິນໃຫຍ່
Back of the BFT remote control, showing '12V === Type B RCB' and CE marking.
Figure 5: Back of the remote control with specifications
A BFT remote control with '433.92MHZ' text, next to an image of a car in a garage, highlighting the operating frequency and application.
Figure 6: Remote control frequency and typical use

5. ການຕິດຕັ້ງ ແລະການຂຽນໂປຣແກຣມ

To program your new BFT remote control, you will need to access the receiver unit of your garage door opener or gate system. The programming process involves interacting with buttons on the receiver board.

ຂັ້ນຕອນການຂຽນໂປຣແກຣມ:

  1. ຊອກຫາຜູ້ຮັບ: Open the motor housing of your garage door or gate system to access the receiver board. Refer to Figure 7 for a typical receiver layout.
  2. Initiate Programming Mode: Press either the SW1 or SW2 button on the receiver board until the LED light on the receiver starts to flash.
  3. Pair Remote Buttons (First Line): Simultaneously press buttons 1 and 2 on your new remote control. Keep them pressed until the LED light on the receiver turns ON solid (stops flashing). Release the buttons.
  4. Pair Additional Buttons: Press button 1 on your new remote control until the LED on the receiver starts flashing again. Repeat this step for any other buttons you wish to program on the remote. Each button on the remote can be programmed to control a different function or door.
Diagram of a Clonix 2 Receiver board, showing the location of SW1, SW2 buttons, and the LED indicator, essential for programming.
Figure 7: Clonix 2 Receiver Board (Example for programming)

If you encounter difficulties, please refer to the "Troubleshooting" section or contact customer support.

Video 1: Programming demonstration for BFT remote controls.

6. ການດໍາເນີນງານ

Once programmed, operating your BFT remote control is simple:

  • ເປີດ/ປິດ: Press the programmed button on your remote control to activate your garage door or gate opener.
  • ການຢຸດເຊົາ: Press the same button again while the door/gate is in motion to stop it.
  • ປີ້ນກັບ: Depending on your opener's settings, pressing the button again after stopping may reverse the direction of travel.
A single BFT 4-button remote control, labeled '1 PCS'.
Figure 8: BFT 4-button remote control
A single BFT 2-button remote control, labeled '1 PCS'.
Figure 9: BFT 2-button remote control

7. ບໍາລຸງຮັກສາ

ການປ່ຽນແບັດເຕີຣີ:

Your remote control comes with a pre-installed battery. When the remote's range decreases significantly or the LED indicator on the remote no longer lights up when a button is pressed, it's likely time to replace the battery. The remote uses a standard 12V battery (e.g., 23A or A23 type).

  1. ເປີດຣີໂໝດຄວບຄຸມຢ່າງລະມັດລະວັງasing.
  2. ເອົາແບັດເກົ່າອອກ.
  3. ໃສ່ຫມໍ້ໄຟ 12V ໃໝ່, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
  4. ປິດຣີໂໝດຄວບຄຸມ casing ຢ່າງປອດໄພ.

8. ການແກ້ໄຂບັນຫາ

  • ໄລຍະໄກບໍ່ເຮັດວຽກຫຼັງຈາກການຂຽນໂປຼແກຼມ:
    • Ensure you followed all programming steps correctly.
    • Check if the receiver's LED lit up solid during programming.
    • Verify that your remote model is indeed compatible with your receiver.
    • ກວດສອບແບັດເຕີຣີຂອງຣີໂໝດ.
  • ຫຼຸດ​ຜ່ອນ​ໄລ​ຍະ​ການ​ປະ​ຕິ​ບັດ​ງານ​:
    • ປ່ຽນແບັດເຕີຣີຂອງຣີໂໝດ.
    • Ensure there are no new obstructions (e.g., metal objects, large vehicles) between the remote and the receiver.
    • ກວດ​ສອບ​ແຫຼ່ງ​ຂໍ້​ມູນ​ຂອງ​ການ​ແຊກ​ແຊງ​ວິ​ທະ​ຍຸ​ໃນ​ພື້ນ​ທີ່​.
  • Receiver LED does not flash when SW1/SW2 is pressed:
    • Ensure the receiver has power.
    • Consult your receiver's specific manual for troubleshooting its programming mode.

9. ຄໍາແນະນໍາຜູ້ໃຊ້

  • If you are having trouble with programming, search for a video tutorial specific to your BFT receiver model. Many users find visual guides helpful.
  • Always keep a spare remote or ensure you have access to your receiver's programming buttons in case your primary remote is lost or damaged.

10. ຄໍາຖາມທີ່ພົບເລື້ອຍ

Q: Can I program this remote without accessing my receiver?
A: No, programming requires physical access to the receiver unit to press its programming buttons (SW1 or SW2).
Q: Is there a programming video available?
A: Yes, a programming video is embedded in the "Setup and Programming" section of this manual. If you need further assistance, please contact customer support.

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For any issues not covered in this manual, or for further assistance, please contact the seller or manufacturer's customer support. Keep your purchase records for warranty purposes.

ຄູ່ມືຜູ້ໃຊ້ໃນຮູບແບບ PDF ຍັງສາມາດດາວໂຫຼດໄດ້: View ຄູ່ມືຜູ້ໃຊ້ (PDF)