1. ບົດແນະນຳ
Thank you for choosing the KALOC UT75 Full Motion TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV mount. The UT75 is designed to securely hold 55-75 inch LCD/LED televisions, offering full motion capabilities including tilt and swivel for optimal viewມຸມຕ່າງໆ. ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນການຕິດຕັ້ງ ແລະ ເກັບມັນໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.
2. ຂໍ້ມູນຄວາມປອດໄພ
ຄຳເຕືອນ: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or death.
- This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and your TV.
- Do not exceed the maximum weight capacity of 40kg (88lbs).
- Verify your TV's VESA pattern is compatible with the mount (200x200mm to 600x400mm).
- Use only the provided mounting hardware. If any parts are missing or damaged, contact KALOC support immediately.
- ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງໄວ້ໄກໃນລະຫວ່າງການຕິດຕັ້ງ.
- Avoid installing the mount near heat sources, direct sunlight, or areas with high humidity.
- ກວດເບິ່ງທຸກສະກູແລະການເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຮັກສາຄວາມປອດໄພ.
3. ເນື້ອໃນຊຸດ
Please check to ensure all components are present and undamaged before beginning installation. If anything is missing or broken, please contact customer support.
- KALOC UT75 TV Wall Mount Assembly
- ວົງເລັບຕິດໂທລະທັດ (2 ຊິ້ນ)
- ແຜ່ນຕິດຝາ
- Mounting Hardware Kit (screws, anchors, washers, spacers for various TV models and wall types)
- ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

4. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | KALOC |
| ໝາຍເລກຕົວແບບ | UT75 |
| ຊື່ຜະລິດຕະພັນ | Full Motion TV ຕິດຝາ |
| ວັດສະດຸ | SPCC (Cold Rolled Steel) |
| ຂະໜາດໂທລະທັດເຂົ້າກັນໄດ້ | 55" - 75" |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA | 200x200mm ຫາ 600x400mm |
| ມຸມອຽງ | -5 ° / + 5 ° |
| ກຳລັງໂຫຼດ | 40kg (88lbs) |
| ໄລຍະຫ່າງກັບ Wall | 30mm - 363mm |


5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and understand the type of wall you are mounting to (wood stud, concrete, brick). It is highly recommended to have two people for installation.
5.1. ການກວດສອບການຕິດຕັ້ງກ່ອນ
- Check Wall Strength: Confirm your wall can support the combined weight of your TV and the mount.
- Locate Studs/Solid Points: Use a stud finder to locate wood studs or ensure you are drilling into solid concrete/brick.
- Determine Mounting Height: Decide on the desired height for your TV. The center of the TV should ideally be at eye level when seated.
5.2. ການຕິດຕັ້ງຂາຕັ້ງໂທລະທັດເຂົ້າກັບໂທລະທັດ
- ວາງໂທລະທັດຂອງທ່ານລົງໃສ່ພື້ນຜິວທີ່ສະອາດ ແລະອ່ອນນຸ້ມລະມັດລະວັງເພື່ອປ້ອງກັນຮອຍຂີດຂ່ວນ.
- ລະບຸຮູສຽບ VESA ຢູ່ດ້ານຫຼັງຂອງໂທລະພາບຂອງທ່ານ.
- ເລືອກສະກູ, ແຜ່ນຮອງ ແລະ ຕົວກັ້ນທີ່ເໝາະສົມຈາກຊຸດຮາດແວທີ່ພໍດີກັບຮູຕິດຕັ້ງຂອງໂທລະພາບຂອງທ່ານ.
- Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened and evenly spaced.

5.3. ການຕິດຕັ້ງແຜ່ນຕິດຝາ
- Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal.
- Mark the drilling locations through the holes on the wall plate.
- ເຈາະຮູນຳຮ່ອງຢູ່ບໍລິເວນທີ່ໝາຍໄວ້. ສຳລັບເສົາໄມ້, ໃຫ້ເຈາະຮູນຳຮ່ອງຂະໜາດທີ່ເໝາະສົມ. ສຳລັບຄອນກີດ/ດິນຈີ່, ໃຫ້ໃຊ້ດອກສະວ່ານກໍ່ສ້າງ ແລະ ໃສ່ສະມໍຝາ.
- Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly.

5.4. ແຂວນໂທລະພາບ
- ດ້ວຍການຊ່ວຍເຫຼືອ, ຍົກໂທລະທັດຢ່າງລະມັດລະວັງດ້ວຍວົງເລັບທີ່ຕິດຄັດມາ.
- Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated and engaged.
- ຍຶດໂທລະພາບໃຫ້ແໜ້ນກັບແຜ່ນຕິດຝາໂດຍໃຊ້ສະກູຄວາມປອດໄພ ຫຼື ກົນໄກລັອກທີ່ມີໃຫ້.
- Gently test the mount's stability and ensure the TV is securely attached before releasing ມັນ.
5.5. Installation Video Overview
For a visual guide on the product and its features, please watch the following video. While it showcases various models, the general principles of full-motion mounts apply.
6. ການດໍາເນີນງານ
The KALOC UT75 mount offers flexible adjustments to achieve your desired viewປະສົບການ.
- ການປັບຕົວອຽງ: The TV can be tilted -5°/+5° to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs (if present) or use the provided tool, adjust to the desired angle, and then re-tighten securely.
- Swivel and Extension: The full-motion arms allow you to swivel the TV left or right and extend it away from the wall (from 30mm to 363mm). Gently push or pull the TV to the desired position.
- ການຄຸ້ມຄອງສາຍໄຟ: Utilize the integrated cable management features (if present on your model) to route and conceal cables for a clean look.

7. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາແບບປົກກະຕິຮັບປະກັນການໃຊ້ງານທີ່ຍາວນານ ແລະປອດໄພຂອງຕົວຕິດໂທລະທັດຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ເຊັດຕົວຍຶດດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ກວດສອບການເຊື່ອມຕໍ່: Periodically (e.g., every 6 months) inspect all mounting screws and bolts to ensure they are still tight and secure.
- ກວດສອບການເສຍຫາຍ: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, discontinue use and contact customer support.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your KALOC UT75 TV mount, refer to the following common problems and solutions:
- ໂທລະພາບບໍ່ແມ່ນລະດັບ:
- Ensure the wall plate was installed perfectly level.
- Check if the TV brackets are evenly attached to the TV.
- Some mounts have a post-installation leveling adjustment feature; consult the specific instructions for your model.
- ຮູ້ສຶກວ່າຕົວຍຶດວ່າງ ຫຼື ບໍ່ໝັ້ນຄົງ:
- ເອົາໂທລະທັດອອກຈາກຕົວຍຶດທັນທີ.
- Re-check all wall mounting bolts and TV bracket screws to ensure they are fully tightened.
- Verify the wall structure is adequate and the anchors (if used) are properly installed.
- Ensure the TV's weight does not exceed the mount's capacity.
- ຄວາມຫຍຸ້ງຍາກໃນການປັບອຽງ/ໝຸນ:
- Ensure any locking knobs or screws for tilt adjustment are loosened before attempting to adjust.
- Apply gentle, even pressure when moving the TV. Do not force it.
ຖ້າຂັ້ນຕອນເຫຼົ່ານີ້ບໍ່ສາມາດແກ້ໄຂບັນຫາຂອງທ່ານໄດ້, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.
9. ຄໍາແນະນໍາຜູ້ໃຊ້
- Consider using a cable management sleeve or ties to bundle and hide cables running from your TV to other devices for a cleaner aesthetic.
- When adjusting the TV's position, always hold the TV firmly with both hands to prevent accidental drops.
- ສໍາລັບທີ່ດີທີ່ສຸດ viewing, adjust the tilt and swivel based on your seating position and room lighting conditions.
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For any questions, technical assistance, or warranty claims, please contact KALOC customer support.
ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ:
WhatsApp: +86 15013439327
Please have your model number (UT75) and purchase information ready when contacting support.





