ແນະນຳ
The Edifier X3 Pro are true wireless earbuds designed for an immersive audio experience, featuring Active Noise Cancellation, Bluetooth V5.4, and multipoint connection. This manual provides detailed instructions for optimal use and care of your Edifier X3 Pro earbuds.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Active Noise Cancellation (ANC) and Ambient Awareness
- 8mm Dynamic Drivers for rich, versatile sound
- AI Call Noise Cancelling for clear hands-free calls
- Bluetooth® V5.4 for faster data transfer and reliable connection
- 0.05s Ultra-Low Latency for gaming and audio synchronization
- Long Battery Life: 7 hours playtime (earbuds), 22 hours total with charging case
- Multipoint Connection for seamless switching between devices
- IP54 Certificated for dust and splash resistance
- EDIFIER ConneX App support for customization and control
- Ergonomic design with 3 pairs of antibacterial ear tips for a secure and comfortable fit
ເກີນview of Edifier X3 Pro key features including Active Noise Cancellation, 8mm Dynamic Drivers, AI Call Noise Cancelling, Bluetooth V5.4, 0.05s Low Latency, Long Battery Life, Multipoint Connection, IP54 certification, and EDIFIER ConneX App support.
ຕັ້ງຄ່າ
ເນື້ອໃນຊຸດ
- Edifier X3 Pro True Wireless Earbuds (L/R)
- ກ່ອງສາກ
- ສາຍສາກ USB-C
- 3 Pairs of Antibacterial Ear Tips (S/M/L)
ກຳລັງສາກຫູຟັງ ແລະ ເຄສ
- ວາງຫູຟັງໃສ່ຊ່ອງສາກໄຟ.
- ເຊື່ອມຕໍ່ກ່ອງສາກກັບແຫຼ່ງພະລັງງານໂດຍໃຊ້ສາຍ USB-C ທີ່ໃຫ້ມາ.
- ໄຟສັນຍານຢູ່ເທິງເຄສຈະສະແດງສະຖານະການສາກໄຟ. ການສາກໄຟໃຫ້ເຕັມສຳລັບເຄສໃຊ້ເວລາປະມານ 1.5 ຊົ່ວໂມງ.
ໝາຍເຫດ: Ensure the charging input is 5V === 1A for optimal charging.
Selecting and Installing Ear Tips
Choose the ear tips that provide the best seal and comfort for your ears. A good seal is crucial for optimal sound quality and effective noise cancellation.
Illustration of proper earbud fit and the three sizes of antibacterial ear tips for a secure and comfortable experience.
ການຈັບຄູ່ເບື້ອງຕົ້ນ
- ເປີດກ່ອງສາກໄຟ. ຫູຟັງເອຍບັດຈະເຂົ້າສູ່ໂໝດຈັບຄູ່ໂດຍອັດຕະໂນມັດ.
- ໃນອຸປະກອນຂອງທ່ານ (ໂທລະສັບສະຫຼາດ, ແທັບເລັດ, ແລະອື່ນໆ), ເປີດໃຊ້ Bluetooth ແລະຊອກຫາອຸປະກອນທີ່ມີຢູ່.
- Select "Edifier X3 Pro" from the list to connect.
- ເມື່ອເຊື່ອມຕໍ່ແລ້ວ, ທ່ານຈະໄດ້ຍິນສຽງຢືນຢັນ.
ການເຊື່ອມຕໍ່ຫຼາຍຈຸດ
The Edifier X3 Pro supports multipoint connection, allowing you to connect to two devices simultaneously and switch between them seamlessly.
The Edifier X3 Pro earbuds demonstrating multipoint connection, allowing simultaneous connection to a laptop and a smartphone.
ຄໍາແນະນໍາການດໍາເນີນງານ
ແຕະການຄວບຄຸມ
The Edifier X3 Pro earbuds feature intuitive touch controls. Specific functions (e.g., play/pause, track skip, call management, ANC mode switching) can typically be customized and viewed within the EDIFIER ConneX App.
Active Noise Cancellation (ANC) and Ambient Awareness
The earbuds offer Active Noise Cancellation to reduce unwanted background noise and Ambient Awareness mode to let you hear your surroundings. These modes can be toggled via the touch controls or the EDIFIER ConneX App.
Visual representation of Active Noise Cancellation (ANC) being turned on and off, showing how it reduces ambient sound.
ແອັບ EDIFIER ConneX
Enhance your experience by downloading the EDIFIER ConneX App. The app allows you to:
- Explore preset EQs and customize your listening style.
- Adjust noise cancellation and ambient sound levels.
- ອັບເດດເຟີມແວເພື່ອປະສິດທິພາບທີ່ດີທີ່ສຸດ.
- ປ່ຽນຊື່ຫູຟັງຂອງທ່ານ.
- Locate lost earbuds.
Screenshots of the EDIFIER ConneX App, demonstrating options for sound effects, noise cancellation controls, and game mode settings.
ໂໝດການຕອບສະໜອງຕໍ່າ
Activate the 0.05s ultra-low latency mode for immediate audio feedback, ideal for gaming and video playback to ensure perfect synchronization.
The Edifier X3 Pro earbuds paired with a smartphone showing a game, illustrating the benefit of 0.05s ultra-low latency for an enhanced gaming experience.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
- ເຊັດຫູຟັງຫູຟັງ ແລະ ກະເປົ໋າສາກໄຟດ້ວຍຜ້າແພອ່ອນໆ, ແຫ້ງ, ບໍ່ມີເຈັ້ຍ.
- ຖອດປາຍຫູອອກ ແລະເຮັດຄວາມສະອາດດ້ວຍສະບູອ່ອນໆ ແລະນໍ້າ, ຈາກນັ້ນເຊັດໃຫ້ແຫ້ງກ່ອນຕິດໃໝ່.
- ໃຊ້ສຳລີແຫ້ງເຊັດທຳຄວາມສະອາດຈຸດສາກໄຟຢູ່ທັງຫູຟັງ ແລະ ເຄສ.
ການຕໍ່ຕ້ານນ້ໍາແລະຝຸ່ນ
The Edifier X3 Pro earbuds are IP54-rated for dust and splash resistance, making them suitable for use during exercise or in light rain. However, please note:
- The charging case is NOT dust or water-resistant.
- Protection may not be permanent and can deteriorate due to daily wear and tear.
- ຢ່າເອົາຫູຟັງເອຍບັດໃສ່ນ້ຳ.
The Edifier X3 Pro earbuds shown with water droplets, highlighting their IP54 dust and splash resistance.
ການດູແລຫມໍ້ໄຟ
- ຫຼີກລ້ຽງການປະຈຸຫມໍ້ໄຟຢ່າງເຕັມທີ່ເລື້ອຍໆ.
- ເກັບຮັກສາຫູຟັງເອຍບັດ ແລະເຄສໄວ້ໃນບ່ອນເຢັນ ແລະແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
- ໃຫ້ສາກອຸປະກອນເປັນປະຈຳ, ເຖິງແມ່ນວ່າຈະບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນກໍຕາມ, ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.
ການແກ້ໄຂບັນຫາ
- ຫູຟັງຫູຟັງບໍ່ໄດ້ຈັບຄູ່/ເຊື່ອມຕໍ່: Ensure the earbuds are charged and in pairing mode. Turn off and on your device's Bluetooth, then try reconnecting. If issues persist, try resetting the earbuds (refer to the app or Edifier support for specific reset instructions).
- ຄຸນະພາບສຽງບໍ່ດີ: Ensure the ear tips provide a good seal in your ear. Adjust EQ settings via the EDIFIER ConneX App. Check if the audio source quality is high.
- ການເຊື່ອມຕໍ່ຫຼຸດລົງ: Ensure your device is within the Bluetooth range (<10m) and there are no significant obstructions. Disconnect and reconnect the earbuds from your device.
- ບັນຫາຄຸນນະພາບການໂທ: Ensure the earbuds are properly seated in your ears. The AI Call Noise Cancelling feature should enhance clarity, but environmental factors can still affect performance.
- ຫູຟັງບໍ່ສາກ: ກວດເບິ່ງວ່າສາຍສາກໄດ້ເຊື່ອມຕໍ່ຢ່າງປອດໄພກັບທັງກໍລະນີ ແລະແຫຼ່ງພະລັງງານ. ກວດໃຫ້ແນ່ໃຈວ່າຕົວຕິດຕໍ່ການສາກໄຟຢູ່ຫູຟັງເອຍບັດ ແລະ ພາຍໃນເຄສນັ້ນສະອາດ ແລະ ບໍ່ມີສິ່ງເສດເຫຼືອ.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຊື່ຍີ່ຫໍ້ | Edifier |
| ຕົວແບບ | X3 Pro |
| ລຸ້ນ Bluetooth | 5.4 |
| ພິທີການ Bluetooth | A2DP, AVRCP, HFP |
| ປະເພດໄຮ້ສາຍ | Bluetooth (ໄຮ້ສາຍແທ້) |
| ຊ່ວງໄຮ້ສາຍສູງສຸດ | <10ມ |
| ຕົວແປງສັນຍານສຽງ | SBC |
| ເສັ້ນຜ່າສູນກາງຄົນຂັບ | 8ມມ |
| ຈໍານວນຄົນຂັບລົດ | 2 |
| ຫຼັກການສຽງຮ້ອງ | ໄດນາມິກ |
| ຊ່ວງການຕອບສະໜອງຄວາມຖີ່ | 20 - 20000Hz |
| ຊ່ວງ Impedance | ເຖິງ 32 Ω |
| ລະດັບຜົນຜະລິດ | 92 ± 3dB (A) |
| ການແຍກສຽງ | ແມ່ນແລ້ວ |
| Active Noise-Cellation | ແມ່ນແລ້ວ |
| ດ້ວຍໄມໂຄຣໂຟນ | ແມ່ນແລ້ວ |
| ການປະເມີນກັນນ້ໍາ | IP54 |
| ສະຫນັບສະຫນູນ APP | ແມ່ນແລ້ວ (EDIFIER ConneX) |
| ເວລາຫຼິ້ນ (ANC ເປີດ) | 6h (earbuds) + 13h (case) = 19h total |
| ເວລາຫຼິ້ນ (ປິດ ANC) | 7h (earbuds) + 15h (case) = 22h total |
| ເວລາສາກໄຟ | ປະມານ. 1.5h |
| ວິທີການສາກໄຟ | ກໍລະນີສາກໄຟ |
| ພອດສາກໄຟ | USB-C |
| ວັດສະດຸ | ພາດສະຕິກ |
| ນ້ຳໜັກ | 38.3g |
| ການຢັ້ງຢືນ | CE |
Comprehensive technical specifications for the Edifier X3 Pro True Wireless Earbuds.
User Tips
- For optimal sound quality and noise cancellation, always ensure you select the correct size ear tips that provide a snug and comfortable seal in your ear canal.
- Regularly use the EDIFIER ConneX App to explore different EQ settings and customize your listening experience to suit various music genres or personal preferences.
- Keep the earbuds and charging case clean, especially the charging contacts, to ensure reliable charging and connectivity.
- ເອົາ advantage of the multipoint connection feature to seamlessly switch between your phone and computer for calls or media without re-pairing.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, please refer to the documentation provided with your purchase or visit the official Edifier website. For further assistance, technical support, or to download the EDIFIER ConneX App, please visit the Edifier support page or contact their customer service directly.
