1. ບົດແນະນຳ
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Samsung Washing Machine PCB Control Panel Display Board (Models DC92-00248E, DC41-00104B). This component is a critical replacement part designed to restore the full functionality of your Samsung drum washing machine's control and display interface. Please read this manual thoroughly before attempting any installation or repair.
2. ຂໍ້ມູນຄວາມປອດໄພ
ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ການເກີດໄຟຟ້າຊັອດ
- Always disconnect the washing machine from the main power supply before attempting any installation, repair, or maintenance.
- Only qualified technicians or individuals with appropriate electrical knowledge should attempt to replace this component.
- Wear appropriate personal protective equipment (PPE), including insulated gloves, during installation.
- Ensure all connections are secure and correctly made before restoring power to the appliance.
- Do not operate the washing machine if the control board or any electrical component is damaged or exposed to moisture.
3. ຜະລິດຕະພັນເກີນview
The PCB Control Panel Display Board is the central interface for controlling and monitoring your Samsung drum washing machine. It integrates the electronic circuitry for program selection, cycle timing, and displaying operational status and error codes.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This control board is a direct replacement part. Proper installation is crucial for the safe and correct functioning of your washing machine. It is highly recommended that installation be performed by a certified appliance technician.
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: ຖອດປລັກເຄື່ອງຊັກຜ້າອອກຈາກປລັກສຽບຝາ.
- ກະດານຄວບຄຸມການເຂົ້າເຖິງ: Depending on your specific Samsung washing machine model, you may need to remove the top panel or front fascia to access the existing control board. Refer to your washing machine's service manual for exact instructions.
- ການເຊື່ອມຕໍ່ເອກະສານ: Before disconnecting any wires, take clear photos of all wiring connections to the old PCB. Note the position and color of each wire.
- ຕັດການເຊື່ອມຕໍ່ກະດານເກົ່າ: ຖອດສາຍໄຟ ແລະ ສະກູຕິດຕັ້ງທັງໝົດທີ່ຍຶດແຜງຄວບຄຸມເກົ່າອອກຢ່າງລະມັດລະວັງ.
- ຕິດຕັ້ງກະດານໃໝ່: Position the new PCB Control Panel Display Board in the same location as the old one. Secure it with the appropriate screws.
- ເຊື່ອມຕໍ່ສາຍໄຟຄືນໃໝ່: Using your documented photos, carefully reconnect all wiring harnesses to the new board. Ensure each connector is firmly seated.
- ປະກອບອຸປະກອນຄືນໃໝ່: Reattach any panels or fascia removed during the process.
- ການທໍາງານຂອງການທົດສອບ: Plug the washing machine back into the power outlet. Perform a test cycle to ensure all functions (power, display, program selection, water fill, spin, etc.) are working correctly.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
This PCB Control Panel Display Board enables the operation of your Samsung washing machine. Once installed, operate your washing machine according to its original user manual. The board facilitates the following core functions:
- ເປີດ/ປິດ
- Program Selection (e.g., Cotton, Synthetics, Delicates)
- Cycle Start/Pause
- Display of remaining time, error codes, and selected options
- Adjustment of temperature, spin speed, and rinse cycles
If the washing machine does not respond as expected after installation, refer to the Troubleshooting section.
6. ບໍາລຸງຮັກສາ
The PCB Control Panel Display Board is a sealed electronic component and generally requires no routine maintenance. To ensure its longevity and proper function:
- Keep the washing machine's control panel clean and dry. Avoid using abrasive cleaners or excessive moisture.
- Protect the washing machine from extreme temperatures and humidity.
- Ensure the washing machine is properly grounded to prevent electrical surges.
7. ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາຫຼັງຈາກຕິດຕັ້ງກະດານຄວບຄຸມໃໝ່, ໃຫ້ພິຈາລະນາດັ່ງຕໍ່ໄປນີ້:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Washing machine does not power on | Loose power connection, faulty outlet, incorrect wiring. | Check power cord, test outlet, re-verify all wiring connections to the PCB. |
| Display is blank or shows incorrect characters | Loose display ribbon cable, faulty display component. | Ensure display ribbon cable is securely connected. If issue persists, the display component may be faulty. |
| ປຸ່ມບໍ່ຕອບສະໜອງ | Loose button connections, faulty buttons. | Check connections to the button array. Ensure no debris is obstructing buttons. |
| Washing machine displays an error code | Specific appliance fault. | Refer to your washing machine's original user manual for the meaning of the error code and recommended solutions. |
ຖ້າຂັ້ນຕອນການແກ້ໄຂບັນຫາບໍ່ສາມາດແກ້ໄຂບັນຫາໄດ້, ໃຫ້ຕິດຕໍ່ຜູ້ຊ່ຽວຊານດ້ານການບໍລິການທີ່ມີຄຸນວຸດທິ.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວເລກຕົວແບບ | DC92-00248E, DC41-00104B |
| ວັດສະດຸ | ປະກອບ |
| ຄວາມຫນາ | 0.6ມມ |
| ປະເພດ | Veneer |
| ຮູບຮ່າງ | I |
| ຕົ້ນກໍາເນີດ | ຈີນແຜ່ນດິນໃຫຍ່ |
| ສານເຄມີທີ່ມີຄວາມເປັນຫ່ວງສູງ | ບໍ່ມີ |
| ການປັບແຕ່ງ | ບໍ່ |
| ນ້ໍາຫນັກຊຸດ | 1.0 ກິໂລ |
| ຂະໜາດແພັກເກັດ (L x W x H) | 20ຊມ x 20ຊມ x 15ຊມ |
9. ຄໍາແນະນໍາຜູ້ໃຊ້
- Always double-check model compatibility before purchasinຊິ້ນສ່ວນທົດແທນ ga.
- When handling the PCB, avoid touching the electronic components directly to prevent static discharge damage.
- Keep the work area clean and well-lit during installation.
10. ສະຫນັບສະຫນູນ
For further assistance or technical inquiries regarding this product, please contact the seller or a qualified appliance repair professional.
