NEWONE 18V/20V MAX Brushless Lithium-Ion Cordless 12-Tool Combo Kit

ແນະນຳ

Thank you for choosing the NEWONE 18V/20V MAX Brushless Lithium-Ion Cordless 12-Tool Combo Kit. This versatile kit provides a powerful brushless motor main body and 12 interchangeable attachments, offering a wide range of functionalities for various tasks. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

ສິນຄ້າເກີນview & ອົງປະກອບ

The NEWONE 12-Tool Combo Kit features a robust brushless motor main body designed for quick attachment changes. The kit includes the following components:

Main Tool Body Features:

• Unlocking Lever: For attaching and detaching tool heads.
• ມໍເຕີທີ່ບໍ່ມີແປງ: Provides efficient power and longer tool life.
• ສະຫຼັບທິດທາງ: Controls forward and reverse rotation.
• ປຸ່ມເປີດ/ປິດ: ການຄວບຄຸມພະລັງງານຫຼັກ.
• ມືຈັບ: ຈັບ Ergonomic ສໍາລັບການນໍາໃຊ້ສະດວກສະບາຍ.
• Unlock Button for Battery: ປ່ອຍຊຸດຫມໍ້ໄຟ.
• ແບັດເຕີຣີທີ່ສາມາດສາກໄດ້: 18V/20V Lithium-Ion battery.
• ໄຟ LED: ເຮັດໃຫ້ມີແສງໃນພື້ນທີ່ເຮັດວຽກ.

ລວມໄຟລ໌ແນບ:

• Impact Drill Attachment (Ø13mm, No: 0-305/0-1400min⁻¹, Impact Frequency: 0-4450/0-17550BPM)
• Impact Screwdriver Attachment (No: 0-2700/min, Impact Frequency: 0-3300BPM)
• Jigsaw Attachment (No: 0-2300/min)
• Chainsaw Attachment (Guide bar length: 4inch, Chain speed: 4.8m/S)
• Mouse Sander Attachment (No: 0-10000/min, 138×97mm)
• Multi-tool (No: 0-21000/min, Oscillation angle: 3°)
• Reciprocating Saw (No: 0-3500/min, Stroke Length: 15mm)
• Circular Saw Attachment (No: 5000/min)
• Electric Wrench Attachment
• Grass Mover & Hedge Trimmer Attachment
• Screwdriver Attachment
• Impact Driver Attachment

ຕັ້ງຄ່າ

Battery Installation & Removal:

1. To install, align the battery with the base of the main tool body and slide it in until it clicks securely into place.
2. To remove, press the 'Unlock Button for Battery' and slide the battery out.

Attaching & Detaching Tool Heads:

1. Ensure the battery is removed before changing attachments.
2. Press the 'Unlocking Lever' on the main tool body.
3. Align the desired attachment head with the main body and push it firmly until it locks into place.
4. To detach, press the 'Unlocking Lever' and pull the attachment head off.

ຄໍາແນະນໍາການດໍາເນີນງານ

ຄວາມປອດໄພທົ່ວໄປ:

• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນ (PPE) ທີ່ເໝາະສົມສະເໝີ ເຊັ່ນ: ແວ່ນຕານິລະໄພ, ຖົງມື, ແລະເຄື່ອງປ້ອງກັນການໄດ້ຍິນ.
• ໃຫ້ແນ່ໃຈວ່າ workpiece ໄດ້ຢ່າງປອດໄພ clamped or held before operation.
• ຮັກສາມືແລະເຄື່ອງນຸ່ງທີ່ວ່າງໄວ້ຫ່າງຈາກພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
• Do not operate tools in wet conditions or near flammable materials.
• ໃຫ້ຖອດແບັດເຕີຣີອອກສະເໝີກ່ອນປັບ, ປ່ຽນອຸປະກອນເສີມ ຫຼື ເກັບຮັກສາເຄື່ອງມື.

Impact Drill / Impact Screwdriver Operation:

1. Select the appropriate drill bit or screwdriver bit for your task.
2. Insert the bit into the Keyless Chuck (for drill) or Drive Bit Retaining Ring (for impact driver/screwdriver) and tighten securely.
3. Adjust the Torque Adjustment Ring to the desired setting (for drill).
4. Use the Low/High Speed Button to select the appropriate speed.
5. Press the Trigger to start the tool. Use the Direction Switch for forward or reverse.

Reciprocating Saw / Jigsaw Operation:

1. Select the correct blade for the material (wood, metal, etc.).
2. For Reciprocating Saw: Insert the blade into the Locking Ring and ensure it's secure.
3. For Jigsaw: Insert the blade into the Accessory Locking Lever and ensure it's secure.
4. Place the Shoe/Sole Plate firmly against the workpiece.
5. Press the Trigger to start cutting.

Circular Saw Operation:

1. Ensure the correct Circular Saw Blade is installed and secured.
2. Adjust the Guide Bar and Guard for desired cutting depth and angle.
3. Place the Sole Plate on the workpiece.
4. Press the Trigger to start the saw and guide it along the cutting line.

Chainsaw Operation:

1. Ensure the 4" Chain is properly tensioned and lubricated (if applicable). Tension can be adjusted with a screwdriver.
2. The Chainsaw attachment features a separate safety switch that must be pressed for operation.
3. ຖືເຄື່ອງມືໃຫ້ແຫນ້ນດ້ວຍມືທັງສອງ.
4. Press the safety switch and then the main trigger to begin cutting.

Grass Mover & Hedge Trimmer Operation:

1. Select either the short blade (for grass in hard-to-reach areas) or the long blade (for hedges/shrubs).
2. Attach the desired blade securely using the Blade Release Button.
3. Ensure the Safety Lock-off is disengaged before pressing the On/Off Switch.
4. Hold the tool firmly and guide it along the area to be trimmed.

Sander / Multi-tool Operation:

1. Attach the appropriate sanding pad or multi-tool accessory.
2. Ensure the accessory is securely fastened using the Accessory Locking Lever or Accessory Drive Spindle.
3. Place the tool on the workpiece and press the Trigger to begin sanding or cutting/scraping.

ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດທົ່ວໄປ:

• ຖອດແບດເຕີລີ່ທຸກຄັ້ງກ່ອນທີ່ຈະເຮັດຄວາມສະອາດ.
• Wipe down the tool body and attachments with a clean, damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• Remove any sawdust, debris, or grime from vents and moving parts.

Blade and Accessory Care:

• Inspect blades and accessories regularly for wear, damage, or dullness. Replace as needed.
• Keep blades sharp for optimal performance and safety.
• For chainsaw, ensure the chain is properly tensioned and lubricated according to manufacturer recommendations.

ການດູແລຫມໍ້ໄຟ:

• ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ສຸດ.
• ຢ່າເກັບແບັດເຕີລີຢູ່ໃນສະພາບທີ່ປ່ອຍປະໄວ້ເປັນເວລາດົນ.
• ສາກແບັດເຕີຣີໃຫ້ເຕັມກ່ອນການນຳໃຊ້ຄັ້ງທຳອິດ ແລະຫຼັງການນຳໃຊ້ແຕ່ລະຄັ້ງ.

ການແກ້ໄຂບັນຫາ

ເຄື່ອງ​ມື​ບໍ່​ໄດ້​ເລີ່ມ​ຕົ້ນ​:

• ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ສາກເຕັມແລ້ວ ແລະສຽບໃສ່ຢ່າງຖືກຕ້ອງ.
• Check if the safety lock-off (if present on the attachment) is disengaged.
• Verify that the attachment is correctly secured to the main body.

ປະສິດທິພາບຫຼຸດລົງ:

• ກວດເບິ່ງລະດັບການສາກໄຟ.
• Ensure blades/bits are sharp and not worn.
• Clean any debris from the tool and attachment.

ການສັ່ນສະເທືອນ ຫຼືສຽງດັງເກີນໄປ:

• Ensure all attachments and accessories are securely fastened.
• ກວດ​ສອບ​ສ່ວນ​ທີ່​ຂາດ ຫຼື​ເສຍ​ຫາຍ.

ຂໍ້ມູນຈໍາເພາະ

User Tips

• ຄວາມເຂົ້າກັນໄດ້ຂອງຫມໍ້ໄຟ: The main tool body is compatible with both NEWONE 20V MAX Lithium-Ion batteries and Makita 18V Lithium-Ion batteries, offering flexibility if you own other tools from these brands.
• Jigsaw Visibility: When using the Jigsaw, sawdust can accumulate and obscure the cutting line. It is recommended to frequently clear the sawdust or use a vacuum attachment (if available) to maintain clear visibility for precise cuts.
• Sander Vibration: The sander attachment can produce strong vibrations. Ensure a firm grip and take breaks during extended use to prevent fatigue.

ການຮັບປະກັນ & ສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please refer to the official NEWONE product webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຂາຍຍ່ອຍຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.