ແນະນຳ
The HANMATEK TI120 is a versatile, rugged, and ergonomically designed infrared thermal imager engineered for professional maintenance and detection tasks. It features a UFPA detector for excellent infrared resolution and offers a variety of palette modes for diverse applications. This manual provides essential information for the safe and effective use of your thermal imager.
ເນື້ອໃນຊຸດ
ກະລຸນາກວດເບິ່ງເນື້ອໃນຂອງຊຸດເມື່ອໄດ້ຮັບເພື່ອຮັບປະກັນວ່າສິນຄ້າທັງໝົດມີຢູ່:
- TI120 Thermal Imager
- ກະເປົາຖື
- ສາຍແຂນ
- ສາຍ USB Type-C
- 32GB Micro SD Card
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຕັ້ງຄ່າ
1. ການສາກແບັດເຕີຣີ
The TI120 is equipped with a 3.7V/5000mAh rechargeable Li-ion battery. For optimal performance, fully charge the device before first use. Connect the Type-C USB cable to the device and a suitable power adapter (not included). The battery indicator on the screen will show charging status. A full charge typically takes approximately 5 hours and provides continuous use for more than 6 hours.
2. ການໃສ່ Micro SD Card
The device comes with a 32GB Micro SD card for storing thermal images. Locate the SD card slot, typically on the side of the device, and insert the card until it clicks into place. Ensure the device is powered off before inserting or removing the SD card.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ອຸປະກອນເກີນview ແລະການຄວບຄຸມ
Familiarize yourself with the buttons and display:
- ປຸ່ມເປີດປິດ: ກົດຄ້າງໄວ້ເພື່ອເປີດ/ປິດອຸປະກອນ.
- ປຸ່ມ SET: ເຂົ້າເຖິງຕົວເລືອກເມນູ ແລະຢືນຢັນການເລືອກ.
- ປຸ່ມນຳທາງ (ຂຶ້ນ, ລົງ, ຊ້າຍ, ຂວາ): ນຳທາງຜ່ານເມນູຕ່າງໆ ແລະປັບການຕັ້ງຄ່າ.
- Picture Browsing Button: View ຮູບພາບທີ່ເກັບໄວ້.
- ປຸ່ມກັບຄືນ: Go back to the previous screen or exit a menu.
- ປຸ່ມກ້ອງຖ່າຍຮູບ: Capture thermal images.
- ປຸ່ມແສງ: Activate the built-in LED light.
2. Image Mode Selection (Fusion Modes)
The TI120 offers five image fusion modes to combine thermal and visible light images for enhanced detail. Use the left and right navigation buttons under the live image screen to adjust the degree of fusion:
- 0% (Pure visible light image)
- 25%
- 50%
- 75%
- 100% (Pure thermal image)
3. ແຜ່ນສີ
Choose from 5 color palettes to visualize temperature differences effectively:
- ຮຸ້ງ
- Iron oxide red
- ສີເຢັນ
- ຄວາມຮ້ອນສີຂາວ
- ຄວາມຮ້ອນສີດໍາ
4. Temperature Measurement Methods
The TI120 supports multiple temperature measurement methods:
- Focused Area (ROI) Temperature Measurement: Measure temperature within a selected region of interest.
- Center Point Temperature Measurement: Provides accurate temperature readings at the center of the screen.
- Automatic Tracking of High and Low Temperatures: The device automatically identifies and displays the highest and lowest temperature points, helping to confirm anomalies quickly.
5. ສັນຍານເຕືອນອຸນຫະພູມສູງ ແລະ ຕໍ່າ
The device features a high and low temperature alarm with LED lights flashing to alert the user when temperatures exceed or fall below set thresholds. This is particularly useful for continuous monitoring.
6. Data Communication and PC Software
The TI120 supports connection to a PC via its Type-C USB port for data transfer and analysis. The PC software offers two modes:
- ໂໝດ USB Drive: Browse images, analyze image data, and generate/export PDF reports.
- USB Camera Mode: Take pictures, project images, and automatically save pictures for over-temperature events.
7. ຄໍາຮ້ອງສະຫມັກ
The HANMATEK TI120 is suitable for a wide range of applications, including:
- ການກວດກາກົນຈັກ
- Electrical fault detection (e.g., distribution boxes, motors)
- HVAC system inspection (e.g., pipe leaks)
- DIY repair detection
- Energy auditing
- ບໍາລຸງຮັກສາສິ່ງອໍານວຍຄວາມສະດວກ
- Auto repair
- Floor heating detection
- ການກວດຫາການຮົ່ວໄຫຼຂອງທໍ່ນ້ໍາ
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the device body. For the lens, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- ການເກັບຮັກສາ: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
- ການດູແລຫມໍ້ໄຟ: ເພື່ອຍືດອາຍຸແບັດເຕີລີ, ຫຼີກເວັ້ນການຖອດແບດເຕີລີ່ເຕັມເລື້ອຍໆ. ສາກອຸປະກອນຢ່າງເປັນປົກກະຕິ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້ເປັນໄລຍະເວລາທີ່ຍາວນານ.
- ການປົກປ້ອງສິ່ງແວດລ້ອມ: The TI120 has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for submersion.
ການແກ້ໄຂບັນຫາ
- ອຸປະກອນບໍ່ເປີດ: ໃຫ້ແນ່ໃຈວ່າໄດ້ສາກໄຟແລ້ວ. ເຊື່ອມຕໍ່ຫາແຫຼ່ງພະລັງງານແລ້ວລອງໃໝ່ອີກຄັ້ງ.
- ຮູບພາບບໍ່ຊັດເຈນ/ມົວ: Check if the lens is clean. Adjust the focus if available (this model has fixed focus). Ensure proper distance to the object.
- ການອ່ານອຸນຫະພູມເບິ່ງຄືວ່າບໍ່ຖືກຕ້ອງ: Verify the emissivity setting is correct for the material being measured. Ensure there are no strong heat sources interfering with the measurement area.
- ບໍ່ສາມາດໂອນຍ້າຍໄດ້ files ກັບ PC: Ensure the USB cable is properly connected and the device is in USB Drive mode. Check PC software installation.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| Infrared Spectral Bandwidth | 8-14 ມມ |
| Thermal Imaging Pixel | 10800 (120*90) |
| Thermal Imaging Sensitivity | ≤60mK |
| ພາກສະຫນາມຂອງ View Angle (FOV) | 50(H)*38(V) |
| ອັດຕາເຟຣມ | ≤25Hz |
| ຊ່ວງອຸນຫະພູມ | -20°C ~ 400°C (-4°F ~ 752°F) |
| ຄວາມຖືກຕ້ອງ | ±2°C or 2% (take the maximum value, at room temperature 25°C) |
| ອັດຕາສ່ວນການແກ້ໄຂ | 0.1°C |
| Temperature Measurement Response Time | ≤500ms |
| ປະເພດການສະແດງ | ໜ້າຈໍ LCD ຂະໜາດ 2.8 ນິ້ວ |
| ຄວາມລະອຽດການສະແດງ | 320*240 |
| ຮູບແບບຮູບພາບ | BMP |
| ເລນແສງທີ່ເບິ່ງເຫັນໄດ້ | ແມ່ນແລ້ວ |
| ຄວາມລະອຽດແສງທີ່ເບິ່ງເຫັນ | 640*480 |
| Visible Light Field Of View Angle (FOV) | 8 ອົງສາ |
| ການສື່ສານຂໍ້ມູນ | ປະເພດ -C USB |
| ແບັດເຕີຣີ | Li-ion 3.7V / 5000mAh |
| ເວລາບໍລິການ | ບໍ່ຫນ້ອຍກວ່າ 6 ຊົ່ວໂມງ |
| ເວລາສາກໄຟ | ≤ 5 ຊົ່ວໂມງ |
| ກຳ ລັງສາກໄຟtage / ປັດຈຸບັນ | 5V/2A |
| ອຸນຫະພູມການເກັບຮັກສາ | -20°C ~ 60°C (-4°F ~ 140°F) |
| ອຸນຫະພູມເຮັດວຽກ | 0 ~ 50°C (32°F ~ 140°F) |
| ຄວາມຊຸ່ມຊື່ນທີ່ເຮັດວຽກ | ≤90%RH (ບໍ່ condensing) |
| ການວັດແທກໄລຍະທາງ | 0.2 ມ-5 ມ (ດີທີ່ສຸດ 1 ມ) |
| ພາສາ | Chinese, English, Russian, Spanish, French, Italian, Japanese, German |
| ເປັນອຸປະກອນອັດສະລິຍະ | ແມ່ນແລ້ວ |
| ການຢັ້ງຢືນ | CE |
User Tips
- Hydraulic Pipe Detection: The TI120 can effectively detect hydraulic pipe passages by identifying temperature differences caused by fluid flow or leaks. Look for distinct thermal patterns along the pipe's path.
- Residential Electrician Use: This device is suitable for residential electricians to detect overheating components in distribution boxes, wiring, and appliances, helping to prevent electrical fires and failures.
- ໄລຍະທາງການວັດແທກທີ່ດີທີ່ສຸດ: For the most accurate readings, maintain a measurement distance between 0.2m and 5m, with 1m being ideal.
- ການປັບຄ່າ emissivity: For precise temperature measurements, especially on different materials, ensure the emissivity setting is correctly adjusted in the device's menu.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the warranty card included in your package or contact HANMATEK Official Store directly. Keep your purchase receipt as proof of purchase.
