Generic RF Lite Control Box Remote Control User Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the proper use and pairing of your Generic RF Lite Control Box Replacement Remote Control, Model RF075D. This remote is designed for specific adjustable bed bases. Please read these instructions carefully before attempting to use or pair the remote control.

2. ຂໍ້ມູນຄວາມເຂົ້າກັນໄດ້ທີ່ສໍາຄັນ

This replacement remote control is not universal. It is crucial to verify compatibility with your existing adjustable bed base control box before use. This remote is specifically designed to work with control boxes matching model number CB.10.20.06 and serial number E24010727 2217, or similar RF Lite Control Box models. Your old remote must be identical in appearance and button layout to this replacement for proper functionality.

To ensure compatibility, please locate the label on your control box and compare its model and serial numbers with the specifications provided. An example of a control box label is shown below.

ຮູບທີ 2.1: Example of a control box label and the remote control. Verify your control box details match for compatibility.

3. ການຕິດຕັ້ງ: ການຕິດຕັ້ງຫມໍ້ໄຟ

The remote control requires two (2) AAA batteries for operation. Batteries are typically not included with the replacement remote.

1. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງການຄວບຄຸມໄລຍະໄກ.
2. ເລື່ອນຝາປິດຊ່ອງໃສ່ແບັດເຕີຣີລົງລຸ່ມເພື່ອເປີດມັນ.
3. ໃສ່ແບັດເຕີຣີ AAA ສອງ (2) ກ້ອນ, ຮັບປະກັນວ່າຂົ້ວບວກ (+) ແລະຂົ້ວລົບ (-) ສອດຄ່ອງກັບຕົວຊີ້ບອກພາຍໃນຊ່ອງຢ່າງຖືກຕ້ອງ.
4. ປ່ຽນຝາປິດຊ່ອງໃສ່ແບັດເຕີລີໂດຍການເລື່ອນມັນກັບຄືນໃສ່ບ່ອນເກົ່າຈົນກວ່າມັນຈະກົດຢ່າງປອດໄພ.

ຮູບທີ 3.1: Remote control battery compartment with AAA batteries.

4. Operating: Pairing Instructions

After installing batteries, you must pair the remote control with your adjustable bed base's control box. Follow these steps carefully:

1. Power Cycle the Bed Base: Unplug the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug the power cord back into the outlet.
2. Activate Pairing Mode on Control Box: Locate the pairing button on your bed base's control box. Press this pairing button two times. A light on the control box should illuminate, indicating it is in pairing mode.
3. ຄູ່ການຄວບຄຸມໄລຍະໄກ: Within a few seconds of activating pairing mode on the control box, simultaneously press and hold the ຂຶ້ນຫົວ ແລະ ຫົວລົງ ປຸ່ມໃນການຄວບຄຸມໄລຍະໄກຂອງທ່ານ.
4. ການຢືນຢັນ: The light on the control box will turn off, indicating that the pairing process is complete. Release the buttons on the remote control.

Test all functions of the remote control to ensure successful pairing.

ຮູບທີ 4.1: Pairing diagram for the remote control and adjustable bed base control box.

ຮູບທີ 4.2: ດ້ານໜ້າ view ຂອງຣີໂໝດຄວບຄຸມທີ່ສະແດງຮູບແບບປຸ່ມ.

5. ການແກ້ໄຂບັນຫາ

• ໄລຍະໄກບໍ່ຕອບສະໜອງ:
  • ກວດເບິ່ງວ່າໃສ່ແບັດເຕີລີ່ຖືກໃສ່ຢ່າງຖືກຕ້ອງ ແລະ ມີຄ່າສາກພຽງພໍຫຼືບໍ່. ປ່ຽນແບັດເຕີລີ ຖ້າຈຳເປັນ.
  • Ensure the remote is properly paired with the control box by following the pairing instructions in Section 4.
• ຖານຕຽງບໍ່ເຄື່ອນຍ້າຍ:
  • Verify that the bed base is securely plugged into a working electrical outlet.
  • If the remote and motors (head or foot) are not functioning after re-pairing and checking power, the issue might be with the control box itself. Consider contacting a service technician or the bed base manufacturer for further diagnosis.
• Lost Remote / Emergency Stop: If your remote is lost or not functioning, and your bed base has an emergency stop feature, refer to your bed base's original manual for instructions on how to return the base to a flat position.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Specific warranty information for this replacement remote control is not provided within this manual. For details regarding warranty coverage or technical support, please refer to the original purchase documentation or contact the seller directly.