ຄູ່ມືການໃຊ້ງານເຄສຄອມພິວເຕີເກມ darkFlash TH285 ATX Mid-Tower

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash TH285 ATX Mid-Tower PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the darkFlash TH285 ATX Mid-Tower PC Gaming Case.

2. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ກ່ອນ​ທີ່​ຈະ​ສືບ​ຕໍ່​ການ​ຕິດ​ຕັ້ງ​:

• darkFlash TH285 ATX Mid-Tower PC Gaming Case
• 4x darkFlash Air12X 120mm ARGB PWM Fans (pre-installed)
• ກ່ອງອຸປະກອນເສີມ (ສະກູ, ສາຍຮັດ, ຕົວຍຶດ, ຄູ່ມືຜູ້ໃຊ້)

3. ຂໍ້ມູນຈໍາເພາະ

Image 3.1: Diagram illustrating key dimensions and component clearances for the TH285 case.

4. ຄຸນສົມບັດຫຼາຍກວ່າview

• High Airflow Performance: Designed with multiple intake and exhaust pathways for optimal cooling efficiency.
• Pre-Installed ARGB PWM Fans: Includes four darkFlash Air12X 120mm ARGB PWM fans for effective cooling and customizable lighting.
• ເຕັມ-View Tempered Glass Design: Front, top, and side panels are constructed from tempered glass to showcase internal components.
• Spacious Compatibility & Dual-Chamber Layout: Supports large GPUs (up to 415mm) and 360mm radiators. The dual-chamber design separates the PSU and cables for improved thermal performance and aesthetics.
• Top I/O for Easy Access: Conveniently located USB ports and audio jacks on the top panel.
• Practical Maintenance: Features removable dust filters and ample cable routing options.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

5.1. ການກະກຽມກໍລະນີ

1. ເອົາເຄສອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. ວາງກໍລະນີຢູ່ເທິງພື້ນຜິວຮາບພຽງທີ່ຫມັ້ນຄົງ.
3. Remove the tempered glass side panels by unscrewing the thumb screws at the rear and gently pulling them away from the chassis. Set them aside on a soft, protected surface to prevent scratches.

Image 5.1: Illustration of removing the tempered glass side panel.

5.2. ການຕິດຕັ້ງເມນບອດ

1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (ATX, M-ATX, ITX).
2. Place your motherboard onto the standoffs, aligning the screw holes.
3. ຮັບປະກັນ motherboard ດ້ວຍ screws ທີ່ສະຫນອງໃຫ້.

5.3. GPU (Graphics Processing Unit) Installation

1. Remove the required number of PCI slot covers from the rear of the case.
2. Insert your GPU into the appropriate PCIe slot on your motherboard.
3. Secure the GPU to the case with screws. The case supports GPUs up to 415mm in length.

ຮູບພາບ 5.2: ດ້ານຫລັງ view showing the 7 PCI expansion slots for GPU and other expansion cards.

5.4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

The TH285 supports 2x 3.5" HDDs and 3x 2.5" SSDs.

1. Locate the drive bays in the dual-chamber area of the case.
2. For 2.5" SSDs: Mount the SSDs to the designated brackets using the provided screws.
3. For 3.5" HDDs: Slide the HDDs into the drive cages and secure them with screws.

ຮູບພາບ 5.3: ພາຍໃນ view highlighting the locations for 2.5" SSDs and 3.5" HDDs.

5.5. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).

1. Position the PSU in its dedicated compartment at the rear of the case.
2. Secure the PSU with screws from the exterior rear of the case.

5.6. ການ​ຕິດ​ຕັ້ງ​ພັດ​ລົມ​ແລະ radiator​

The case comes with 4x 120mm ARGB PWM fans pre-installed. Additional fans or radiators can be installed as follows:

• ເທິງ: Supports up to 2x 140mm or 2x 120mm fans, or a 240/280mm radiator.
• ດ້ານ: Supports up to 2x 140mm or 3x 120mm fans, or a 280/360mm radiator.
• ລຸ່ມ: Supports up to 3x 120mm fans, or a 360mm radiator.

Image 5.4: Diagram illustrating radiator and fan placement options.

5.7. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the cable routing cutouts and tie-down points in the dual-chamber area to organize cables. This improves airflow and maintains a clean interior aesthetic.

5.8. ການເຊື່ອມຕໍ່ແຜງ I/O

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image 5.5: Close-up of the top-mounted I/O panel featuring USB 3.0 and audio ports.

6. ດໍາເນີນຄະດີ

6.1. ເປີດເຄື່ອງ

Once all components are installed and connected, press the power button on the top I/O panel to start your system.

6.2. ການຄວບຄຸມພັດລົມ ARGB

The pre-installed ARGB PWM fans can be controlled via your motherboard's software if it supports Addressable RGB (ARGB) and PWM fan control. Connect the ARGB cables to the appropriate 3-pin 5V ARGB header and the PWM fan cables to 4-pin fan headers on your motherboard.

7. ບໍາລຸງຮັກສາ

7.1. Cleaning Dust Filters

The TH285 case includes removable dust filters to prevent dust buildup. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before re-installing.

7.2. ທໍາຄວາມສະອາດທົ່ວໄປ

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels. For stubborn smudges on glass, a mild glass cleaner can be applied to the cloth (not directly to the glass) and then wiped clean.

8. ການແກ້ໄຂບັນຫາ

• ລະບົບບໍ່ເປີດ: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Verify the PSU switch is in the 'ON' position. Check front panel power button connection to the motherboard.
• Fans are not spinning or ARGB lighting is not working: Confirm fan PWM and ARGB cables are correctly connected to the motherboard headers. Check motherboard software for fan speed and lighting control settings.
• ບໍ່ມີຜົນຜະລິດສະແດງຜົນ: Ensure the GPU is properly seated in its PCIe slot and connected to power. Verify the monitor cable is connected to the GPU, not the motherboard integrated graphics (unless using integrated graphics).

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the darkFlash official webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຂາຍຍ່ອຍໃນທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.