RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. ຕັ້ງຄ່າ

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 ການຫຸ້ມຫໍ່ແລະການກວດກາເບື້ອງຕົ້ນ

• ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
• ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ໃນ​ບັນ​ຊີ​ລາຍ​ການ​ຫຸ້ມ​ຫໍ່​ແມ່ນ​ມີ​.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 ການເຊື່ອມຕໍ່ຕົວຄວບຄຸມ

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• ພະລັງງານຫຼາຍກວ່າ Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• ອະແດັບເຕີພະລັງງານພາຍນອກ: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• ການເຊື່ອມຕໍ່ກ້ອງຖ່າຍຮູບ:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

ຮູບພາບ 2.2: ຕົວຢ່າງample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 ການຕັ້ງຄ່າເຄືອຂ່າຍ

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web ການໂຕ້ຕອບໂດຍການໃສ່ທີ່ຢູ່ IP ຂອງມັນເຂົ້າໄປໃນ a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• ພາຍໃນ web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. ການດໍາເນີນງານ

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 ເກີນview ຂອງ​ການ​ຄວບ​ຄຸມ​

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

ຮູບພາບ 3.2: ລາຍລະອຽດ view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 ການເລືອກກ້ອງຖ່າຍຮູບ

• ປຸ່ມເລືອກດ່ວນ: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• ປຸ່ມກົດຕົວເລກ: For cameras beyond the quick select buttons (up to 255), press the ບັດປະ ຈຳ ຕົວ CAM button, then enter the camera number using the numeric keypad, and press ປ້ອນ.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 ການຄວບຄຸມ PTZ

• ຢອດສະຕິກ: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT Speed ​​Knob: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview ໂໝດ.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: ກົດ ໂຟກັສອັດຕະໂນມັດ button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• ປຸ່ມໄຟຫລັງ: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 presets

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ປ້ອນ ບັນ​ທຶກ. ກົດ ESC ອອກໄປ.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ປ້ອນ to recall. Press ESC ອອກໄປ.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 ການ ນຳ ທາງເມນູ

• ປຸ່ມເມນູ: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ປ້ອນ confirms selections, and ESC acts as a back button.

4. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 ການທໍາຄວາມສະອາດ

• Use a soft, dry cloth to clean the exterior of the controller.
• ສໍາລັບຝຸ່ນ stubborn, ເລັກນ້ອຍ dampເຊັດຜ້າດ້ວຍນ້ຳ ຫຼື ນ້ຳຢາທຳຄວາມສະອາດອ່ອນໆທີ່ບໍ່ຮຸນແຮງ.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 ການເກັບຮັກສາ

• ເມື່ອບໍ່ໄດ້ໃຊ້ງານເປັນເວລາດົນ, ໃຫ້ເກັບຮັກສາຕົວຄວບຄຸມໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດ.
• ປົກປ້ອງອຸປະກອນຈາກຝຸ່ນແລະຄວາມຊຸ່ມຊື່ນ.

5. ການແກ້ໄຂບັນຫາ

ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

5.1 ບໍ່ມີພະລັງງານ

• ກວດສອບແຫຼ່ງພະລັງງານ: ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີໄຟຟ້າໄດ້ເຊື່ອມຕໍ່ກັບທັງຕົວຄວບຄຸມ ແລະ ປລັກໄຟທີ່ໃຊ້ງານໄດ້ຢ່າງແໜ້ນໜາແລ້ວ.
• ກວດ PoE: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• ຄວາມສົມບູນຂອງສາຍ: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• ການເຊື່ອມຕໍ່ເຄືອຂ່າຍ: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Protocol ບໍ່ກົງກັນ: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID ກ້ອງຖ່າຍຮູບ: Ensure the correct camera ID is selected on the controller.
• ຂໍ້ມູນການເຂົ້າສູ່ລະບົບ: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web ການໂຕ້ຕອບ.
• ການເຊື່ອມຕໍ່ Serial: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• ເຟີມແວ: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webເວັບ​ໄຊ​ສໍາ​ລັບ​ການ​ປັບ​ປຸງ​.

5.3 LCD Display Issues

• ບໍ່ມີການສະແດງຜົນ: ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ເປີດເຄື່ອງຄວບຄຸມແລ້ວ.
• ຈໍສະແດງຜົນ: Check if there are any brightness settings on the controller that can be adjusted.

6. ຂໍ້ມູນຈໍາເພາະ

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. ວິດີໂອສາທິດຜະລິດຕະພັນ

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webເວັບໄຊ.

• ຜູ້ຜະລິດ: ບໍລິສັດ ວິທະຍາສາດ ແລະ ເຕັກໂນໂລຊີ Xiamen RGBlink ຈຳກັດ
• ທາງການ Webເວັບໄຊ: www.rgblink.com (ໝາຍເຫດ: ນີ້ແມ່ນຕົວຍຶດບ່ອນ URL, please refer to your product packaging or official documentation for the correct support webເວັບໄຊ.)
• ຂໍ້ມູນຕິດຕໍ່: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.