ຄູ່ມືຜູ້ໃຊ້ ACEBEAM TAC AA 2.0 ໄລຍະໄກທີ່ສຸດ AA

1. ບົດແນະນຳ

The ACEBEAM TAC AA 2.0 is a compact and powerful tactical EDC flashlight designed for versatility and durability. Featuring the SFT-25R HI LED, it delivers a maximum output of 900 lumens and a beam distance of 360 meters. This manual provides essential information for the safe and effective use of your flashlight.

Image: The ACEBEAM TAC AA 2.0 flashlight in Desert color, showcasing ການອອກແບບຫນາແຫນ້ນຂອງມັນ.

2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

• TAC AA 2.0 Flashlight (Battery Included) x 1
• ສາຍເຊືອກ x 1
• Diffuser x 2 (Red and White)
• O-rings x 2
• ສາຍ USB x 1
• ຄູ່ມືຜູ້ໃຊ້ x 1

3. ຕັ້ງຄ່າ

3.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

The TAC AA 2.0 is compatible with both the included 14500 Li-ion rechargeable battery and standard AA alkaline or NiMH batteries.

1. Unscrew the head of the flashlight counter-clockwise.
2. Remove any insulating film from the battery terminals before first use.
3. Insert the included 14500 Li-ion rechargeable battery with the positive (+) end facing towards the head. Alternatively, insert a standard AA alkaline or NiMH battery.
4. Re-attach the head by screwing it clockwise until secure.

3.2 Charging the 14500 Li-ion Battery

The included 14500 Li-ion battery features a built-in USB-C charging port.

1. ຊອກຫາພອດ USB-C ຢູ່ດ້ານຂ້າງຂອງແບັດເຕີຣີ 14500.
2. Connect the provided USB-C cable to the battery and a compatible USB power source.
3. The indicator light on the battery will show red during charging and turn green when fully charged.

Image: The ACEBEAM TAC AA 2.0 demonstrating its USB-C rechargeable battery and compatibility with standard AA batteries.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The TAC AA 2.0 features a tactical tail switch for operation and mode selection.

4.1 ເປີດ/ປິດ

• ຊ່ວງເວລານີ້: Lightly press and hold the tail switch. Release to turn off.
• ເປີດ/ປິດຢ່າງຕໍ່ເນື່ອງ: Fully press the tail switch until it clicks to turn the flashlight on or off.

4.2 ການເລືອກໂໝດ

The flashlight offers 6 lighting modes. It has a mode memory function for general modes (Low, Medium, High, Turbo).

• With the flashlight on, lightly tap the tail switch (without fully clicking) to cycle through modes: Low → Medium → High → Turbo.
• To access Strobe or SOS modes, refer to the specific mode group settings in the technical parameters.
• The flashlight will remember the last used general mode if it was off for more than 3 seconds.

Image: Diagram illustrating the 6 lighting modes available via the tactical tail switch.

4.3 Beam Performance

The SFT-25R HI LED provides a focused beam with a maximum throw of 360 meters, suitable for long-range illumination.

Video: Official ACEBEAM video demonstrating the beam distance and output of the TAC AA 2.0 flashlight in various environments.

5. ບໍາລຸງຮັກສາ

• ການກວດກາວົງແຫວນໂອ: Regularly inspect and clean the O-rings to maintain the flashlight's IP68 water resistance. Replace O-rings if they appear worn or damaged.
• Thread Lubrication: Apply silicone grease to the threads periodically to ensure smooth operation and prevent wear.
• ທໍາຄວາມສະອາດ: Keep the flashlight clean and free from debris. Use a soft, damp ຜ້າ​ສໍາ​ລັບ​ການ​ທໍາ​ຄວາມ​ສະ​ອາດ​. ຫຼີກເວັ້ນການສານເຄມີທີ່ຮຸນແຮງ.
• ການດູແລຫມໍ້ໄຟ: Store the battery in a cool, dry place when not in use. Recharge the battery regularly to prolong its lifespan.

Image: The ACEBEAM TAC AA 2.0 demonstrating its IP68 water-resistant and 1.5-meter impact-resistant features.

6. ການແກ້ໄຂບັນຫາ

• ໄຟສາຍບໍ່ເປີດ: Ensure the battery is correctly installed with the positive (+) end towards the head. Check if the battery is charged. Remove any insulating film if present.
• Low light output or flickering: Recharge the battery or replace with a fresh AA battery. Ensure all connections (head, body, tail cap) are securely tightened. Clean battery contacts if dirty.
• ນໍ້າເຂົ້າ: If water enters the flashlight, immediately remove the battery and allow all components to dry thoroughly before reassembly. Check O-rings for damage and replace if necessary.

7. ຂໍ້ມູນຈໍາເພາະ

Image: Detailed technical parameters table for the ACEBEAM TAC AA 2.0 flashlight.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ACEBEAM provides a 10-year warranty for the TAC AA 2.0 flashlight from the date of purchase. This warranty covers manufacturing defects and normal wear and tear. For the included battery and accessories, specific warranty terms apply as detailed in the product packaging.

For warranty claims or technical support, please contact ACEBEAM customer service through their official website or authorized dealers. Please retain your proof of purchase for warranty validation.