Kress KU270S 20V Brushless Impact Wrench ຄູ່ມືຄໍາແນະນໍາ

1. ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe basic safety precautions when using this power tool to reduce the risk of fire, electric shock, and personal injury. Read all instructions before operating the tool.

ຄວາມປອດໄພຂອງເຄື່ອງມືພະລັງງານທົ່ວໄປ

• ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນ. ຫ້າມບໍ່ໃຫ້ເຄື່ອງໃຊ້ໄຟຟ້າຖືກຝົນ ຫຼືສະພາບທີ່ປຽກ.
• ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection, hearing protection, and appropriate clothing. Use personal protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection for appropriate conditions.
• ການ​ນໍາ​ໃຊ້​ແລະ​ການ​ດູ​ແລ​ເຄື່ອງ​ມື​: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດຊຸດແບັດເຕີລີ່ອອກຈາກເຄື່ອງມືໄຟຟ້າກ່ອນທີ່ຈະເຮັດການປັບປ່ຽນ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.

ຄວາມປອດໄພຊຸດຫມໍ້ໄຟ

• ຫ້າມຖອດ, ເປີດ, ຫຼືແຕກຊຸດແບັດເຕີລີ່.
• ຫ້າມບໍ່ໃຫ້ຊຸດແບັດເຕີລີລັດວົງຈອນ.
• ຢ່າເອົາແບັດເຕີລີ່ໃຫ້ຮ້ອນ ຫຼືໄຟ. ຫຼີກເວັ້ນການເກັບຮັກສາໄວ້ໃນແສງແດດໂດຍກົງ.
• ຫ້າມບໍ່ໃຫ້ແບັດແບັດຖືກກະທົບກົນຈັກ.
• In case of battery leakage, avoid contact with the skin and eyes. If contact has occurred, wash the affected area with copious amounts of water and seek medical advice.

2. ຜະລິດຕະພັນເກີນview

The Kress KU270S 20V Brushless Impact Wrench is designed for efficient fastening and loosening tasks, offering high torque and precision control.

ຮູບທີ 1: Kress KU270S Impact Wrench with 4.0Ah battery, charger, M22 socket, cylindrical pin, belt, and steel cable baffle ring.

ອົງປະກອບລວມ

• Kress KU270S Impact Wrench
• 2x 4.0Ah Batteries
• 2A ເຄື່ອງສາກ
• M22 Socket
• Pin cylindrical
• ສາຍແອວ
• Steel Cable Baffle Ring

ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• Motorful Brushless Motor: Delivers up to 300Nm max torque for fastening and 330Nm nut busting torque for loosening.
• ການຄວບຄຸມຄວາມແມ່ນຍໍາ: Variable 3-mode gear control with 2-speed settings.
• Auto-Stop Reverse: Automatically halts reverse rotation to prevent nut loss and over-rotation.
• ການອອກແບບໄຮ້ສາຍ: Powered by 20V KrossPack batteries for portability.

3. ຕັ້ງຄ່າ

ການຕິດຕັ້ງແລະສາກແບັດເຕີຣີ

1. ກຳລັງສາກແບັດເຕີຣີ: Connect the 2A charger to a power outlet. Insert the 4.0Ah battery into the charger. The indicator light on the charger will show the charging status. Ensure the battery is fully charged before first use.
2. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: Align the battery pack with the base of the impact wrench handle. Slide the battery into place until it clicks securely.
3. ກຳ ຈັດແບັດເຕີຣີ: Press the battery release button (if present) and slide the battery pack out of the tool.

Socket Attachment

1. ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ປິດເຄື່ອງ ແລະ ແບັດເຕີຣີອອກ.
2. Align the M22 socket with the 1/2-inch square drive on the impact wrench.
3. Push the socket firmly onto the drive until it locks into place.
4. To remove, pull the socket off the drive while holding the tool securely.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Familiarize yourself with the tool's controls before beginning any work.

ຮູບທີ 2: The Kress KU270S Impact Wrench in use for automotive applications.

ເປີດ/ປິດ

• To turn on the tool, press the trigger switch. The tool's speed is variable depending on how far the trigger is pressed.
• ເພື່ອປິດເຄື່ອງມື, ປ່ອຍປຸ່ມກະຕຸ້ນ.

ການເລືອກຄວາມໄວ

The KU270S features a 2-speed mode selector. Use the speed selector switch (typically located near the top of the tool) to choose between low and high-speed settings. Lower speeds are suitable for delicate tasks or when starting, while higher speeds provide maximum torque for stubborn fasteners.

Auto-Stop Reverse Function

This feature is designed to prevent nuts from falling off after being loosened. When operating in reverse mode, the tool will automatically stop rotation once the fastener is loose, allowing you to safely remove it by hand. To activate, select the reverse direction and engage the auto-stop mode (refer to specific tool markings if available).

ການດໍາເນີນງານທົ່ວໄປ

1. Ensure the correct socket size is attached and securely fastened.
2. Select the desired speed and direction (forward for tightening, reverse for loosening).
3. ວາງເຕົ້າສຽບໃສ່ກັບ fastener.
4. Press the trigger to begin operation. Apply steady pressure to the tool.
5. For tightening, ensure fasteners are tightened to the manufacturer's recommended torque specifications using a torque wrench if precision is required.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your Kress Impact Wrench.

ທໍາຄວາມສະອາດ

• ຮັກສາຊ່ອງລະບາຍອາກາດຂອງເຄື່ອງມືໃຫ້ສະອາດເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ.
• ໃຊ້ອ່ອນ, ງamp ຜ້າເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງເຄື່ອງມື. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• Periodically clean the battery terminals with a clean cloth.

ການເກັບຮັກສາ

• Store the tool and battery in a cool, dry place, away from direct sunlight and moisture.
• ໃຫ້ແນ່ໃຈວ່າແບດເຕີຣີຖືກສາກເປັນບາງສ່ວນ (ປະມານ 50%) ກ່ອນການເກັບຮັກສາໃນໄລຍະຍາວ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

ການດູແລຫມໍ້ໄຟ

• ຢ່າເກັບແບັດເຕີລີຢູ່ໃນສະພາບທີ່ໄຫຼອອກ.
• ຫຼີກເວັ້ນການເປີດເຜີຍແບດເຕີລີ່ກັບອຸນຫະພູມທີ່ຮຸນແຮງ.
• If the battery is not used for extended periods, charge it every 3-6 months to maintain its health.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Kress KU270S Impact Wrench, refer to the following common solutions:

• ເຄື່ອງ​ມື​ບໍ່​ໄດ້​ເລີ່ມ​ຕົ້ນ​:
  • ກວດເບິ່ງວ່າແບດເຕີລີ່ຖືກສາກເຕັມແລະໃສ່ຢ່າງຖືກຕ້ອງ.
  • Ensure the trigger switch is fully depressed.
• Reduced power or torque:
  • ຫມໍ້ໄຟອາດຈະຕ່ໍາ; ຕື່ມຂໍ້ມູນໃສ່ມັນ.
  • The socket may be worn or incorrect for the fastener.
  • The tool may be operating in a lower speed setting; adjust as needed.
• ເຄື່ອງມືຮ້ອນເກີນໄປ:
  • ຮັບປະກັນວ່າຊ່ອງລະບາຍອາກາດບໍ່ມີສິ່ງເສດເຫຼືອ.
  • Allow the tool to cool down before continued use. Avoid prolonged heavy-duty operation without breaks.
• Socket not attaching securely:
  • Check for debris in the square drive.
  • Ensure the socket is compatible with a 1/2-inch drive.

ຖ້າບັນຫາຍັງຄົງຢູ່, ໃຫ້ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

7. ຂໍ້ມູນຈໍາເພາະ

Technical data for the Kress KU270S 20V Brushless Impact Wrench:

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

• ການຮັບປະກັນເຄື່ອງ: 1 ປີນັບຈາກວັນທີຊື້.
• ການຮັບປະກັນຫມໍ້ໄຟ: 6 ເດືອນນັບຈາກວັນທີຊື້.

Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage due to misuse, abuse, alteration, or normal wear and tear.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, service, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Kress webເວັບໄຊ.