Polibi King Size Upholstered Platform Bed Instruction Manual

ແນະນຳ

Thank you for choosing the Polibi King Size Upholstered Platform Bed. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

ຂໍ້ມູນຄວາມປອດໄພ

• ໃຫ້ແນ່ໃຈວ່າທຸກພາກສ່ວນມີຢູ່ແລະບໍ່ເສຍຫາຍກ່ອນທີ່ຈະປະກອບ. ຢ່າໃຊ້ຖ້າຊິ້ນສ່ວນໃດຂາດຫຼືແຕກ.
• Assemble the bed on a soft, clean surface (e.g., carpet) to prevent scratching.
• Always use two or more people for assembly to prevent injury.
• Tighten all bolts and screws securely, but do not overtighten. Recheck tightness periodically.
• Do not allow children to climb on the bed frame during or after assembly.
• The bed frame is designed to support a maximum weight of 1000 pounds. Do not exceed this limit.

ເນື້ອໃນຊຸດ

Your Polibi King Size Upholstered Platform Bed will arrive in two separate boxes. Please verify that all components listed below are present before proceeding with assembly.

ຮູບທີ 1: All components included in the Polibi King Size Upholstered Platform Bed package.

ສ່ວນປະກອບທີ່ລວມຢູ່ໂດຍປົກກະຕິແລ້ວປະກອບດ້ວຍ:

• Oversized Padded Headboard
• ລາງລົດໄຟຂ້າງ (ຊ້າຍແລະຂວາ)
• ແຜ່ນຮອງຕີນລົດ
• ຄານຮອງຮັບກາງ
• Solid Pine Wood Slats (20 pieces, 10cm wide)
• Support Legs (for frame and center beam)
• Hardware Pack (bolts, washers, nuts, Allen wrench, hammer)

A power drill (not included) is recommended for quicker assembly.

ຄໍາແນະນໍາຂອງສະພາແຫ່ງ

Follow these steps to assemble your Polibi King Size Upholstered Platform Bed. It is recommended to have at least two people for assembly.

ຂັ້ນຕອນທີ 1: ປະກອບກອບຕົ້ນຕໍ

1. Unpack all components and lay them out on a soft, clean surface. Identify the headboard, footboard, and side rails.
2. Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure.

ຮູບທີ 2: Assembling the main bed frame by connecting side rails to the headboard and footboard.

Step 2: Install Center Support and Legs

3. Attach the center support beam to the designated points on the headboard and footboard.
4. Screw in the support legs to the main frame and the center support beam. Ensure they are firmly tightened to provide stability.

Step 3: Place Bed Slats

5. Lay the solid pine wood slats across the bed frame, ensuring they are evenly spaced. The slats are 10cm wide for enhanced support.
6. Secure the slats to the side rails using the provided hardware or pre-drilled holes.

ຮູບທີ 3: Bed frame with all solid wood slats properly installed, providing a sturdy base for the mattress.

ຮູບທີ 4: ໃກ້ຊິດ view of the 10cm wide bed slats, designed for even mattress support and silent sleep due to sponge stickers on support points.

Step 4: Adjust Mattress Height (Optional)

This bed frame is designed to accommodate multiple mattress heights (6", 8", 10", 12") by adjusting the installation method of the bed frame components. Refer to the specific instructions provided with your hardware for detailed adjustment steps.

ຮູບທີ 5: Adjustable bed frame settings for 6", 8", 10", and 12" mattress heights.

ຂໍ້ແນະນຳການນຳໃຊ້

ຄວາມເຂົ້າກັນໄດ້ຂອງ Mattress

The Polibi King Size Upholstered Platform Bed is compatible with King size mattresses ranging from 6 to 12 inches in height. The embedded design helps keep your mattress securely in place.

ຄວາມອາດສາມາດນ້ໍາຫນັກ

The bed frame is constructed with a solid pine wood frame and reinforced slats, providing a robust support system. It has been tested to confidently support up to 1000 pounds.

ຮູບທີ 6: Key features of the bed frame, including its 1000-pound weight capacity and silent sleep design.

ການດູແລແລະບໍາລຸງຮັກສາ

ການດູແລເບາະ

The bed is fully upholstered with a premium, waterproof polyester fabric. To maintain its appearance:

• For general cleaning, gently wipe the fabric with a clean, damp ຜ້າ.
• For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the fabric.
• Vacuum regularly with an upholstery attachment to remove dust and debris.

ຮູບທີ 7: Close-up of the premium polyester fabric, which is smooth, soft, and waterproof.

ການດູແລກອບ

• ກວດເບິ່ງສະລັອດແລະສະກູເປັນໄລຍະໆເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນແຫນ້ນ. ຢືດຄືນຕາມຄວາມຈໍາເປັນ.
• Avoid dragging the bed frame when moving it; always lift to prevent damage to the legs and frame structure.

ການແກ້ໄຂບັນຫາ

If you encounter any issues with your Polibi King Size Upholstered Platform Bed, please refer to the following common solutions:

• ສຽງດັງ: Check all bolts and screws for tightness. Ensure the support legs are firmly in contact with the floor. The bed slats are designed with sponge stickers to minimize noise.
• ຄວາມບໍ່ສະຖຽນລະພາບ: Verify that all connections are secure and that the bed is assembled on a level surface. Ensure all support legs are properly installed and tightened.
• ຊິ້ນສ່ວນທີ່ຂາດຫາຍໄປ: ຖ້າມີຊິ້ນສ່ວນໃດຂາດຫາຍໄປໃນເວລາຈັດສົ່ງ, ກະລຸນາຕິດຕໍ່ຫາຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າທັນທີ.

For issues not resolved by the above steps, please contact Polibi customer support.

ຂໍ້ມູນຈໍາເພາະ

ຮູບທີ 8: Overall dimensions and key measurements of the Polibi King Size Upholstered Platform Bed.

ຂໍ້ມູນການຮັບປະກັນ

Specific warranty details for your Polibi King Size Upholstered Platform Bed may vary. Please refer to the product listing on the retailer's website or contact Polibi customer support for comprehensive warranty information.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For any questions, assistance with assembly, or to report missing/damaged parts, please contact Polibi customer support through the retailer where the product was purchased. You can typically find contact information on the seller's page or your order details.

ຜູ້ຂາຍ: ໂປລິບີ