Aramox TM619H-2 Electronic Time Control Switch

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Aramox TM619H-2 Electronic Time Control Switch. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect power before installation or maintenance to prevent electric shock.
• ການຕິດຕັ້ງຄວນຈະປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ ຫຼື ບຸກຄົນທີ່ມີຄວາມຮູ້.
• Ensure the wiring connections are secure and comply with local electrical codes.
• ຢ່າໃຫ້ອຸປະກອນຖືກຄວາມຊຸ່ມຊື່ນ, ຝຸ່ນ ຫຼື ອຸນຫະພູມສູງເກີນໄປ.
• The device is designed for indoor use unless otherwise specified.

3. ຜະລິດຕະພັນເກີນview

The Aramox TM619H-2 is a digital time control switch designed for precise scheduling of electrical devices. It features an LCD digital display and supports both 24-hour and 12-hour time systems. This model operates on 12V DC and includes a memory backup function to retain programming during power interruptions (requires a 3V lithium battery, not included).

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Digital LCD display for clear time and program viewing.
• Supports 24-hour and 12-hour time systems.
• Programmable ON/OFF events.
• Memory backup during power outages (with installed battery).
• ຟັງຊັນການລົບລ້າງດ້ວຍຕົນເອງ.

ອົງປະກອບ:

The device consists of a main body with an LCD display and control buttons on the front, and wiring terminals on the back.

ຮູບ 1: ດ້ານຫນ້າ view of the TM619H-2 timer switch, displaying the LCD screen and various control buttons such as CLOCK, TIMER, DAY, HOUR, MIN, and MANUAL.

4. ຂໍ້ມູນຈໍາເພາະ

5. ຕັ້ງຄ່າ

5.1. Battery Installation (for Memory Backup)

The TM619H-2 requires a 3V lithium battery (e.g., CR2032, not included) for memory backup. This battery ensures that your programmed settings are retained during power outages. Locate the battery compartment, insert the battery with the correct polarity, and close the compartment.

5.2. ການຕິດຕັ້ງ

The timer switch is designed for panel assembly. Secure the device in a suitable enclosure or panel cutout using appropriate mounting hardware (not included).

5.3. ສາຍໄຟ

Refer to the wiring diagram on the back of the device and the images below for correct connections. Ensure all connections are tight and insulated.

ຮູບ 2: ກັບຄືນໄປບ່ອນ view of the TM619H-2 timer switch, illustrating the input and output terminals for wiring.

Figure 3: Comparison of wiring configurations for new and old versions of the TM619H-2 model. Always refer to the diagram on your specific unit.

General Wiring Guide:

• Input Power (DC12V): Connect your 12V DC power supply to the designated input terminals (typically labeled 'INPUT' or 'LINE').
• ໂຫຼດຜົນຜະລິດ: Connect the device you wish to control to the output terminals (typically labeled 'OUTPUT' or 'LOAD'). The timer acts as a switch for this load.
• Ensure the load's current draw does not exceed the timer's maximum rating of 30A.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. Initial Power-Up and Reset

Upon first power-up or after battery installation, the display may show random characters. Press the R (Reset) button (usually a small recessed button requiring a pointed object) to clear all settings and initialize the timer.

6.2. ຕັ້ງຄ່າເວລາປະຈຸບັນ

1. ກົດ ໂມງ ກົດປຸ່ມ ແລະ ກົດມັນຄ້າງໄວ້.
2. ໃນຂະນະທີ່ຖື ໂມງ, ກົດ ວັນ ເພື່ອກໍານົດມື້ປະຈຸບັນຂອງອາທິດ.
3. ໃນຂະນະທີ່ຖື ໂມງ, ກົດ ຊົ່ວໂມງ ເພື່ອກໍານົດຊົ່ວໂມງປະຈຸບັນ.
4. ໃນຂະນະທີ່ຖື ໂມງ, ກົດ ນາທີ ເພື່ອກໍານົດນາທີປະຈຸບັນ.
5. ປ່ອຍຕົວ ໂມງ ປຸ່ມ. ເວລາໄດ້ຖືກຕັ້ງແລ້ວ.

6.3. Switching 12/24-Hour System

ເພື່ອສະຫຼັບລະຫວ່າງຮູບແບບ 12 ຊົ່ວໂມງ (AM/PM) ແລະ 24 ຊົ່ວໂມງ, ໃຫ້ກົດປຸ່ມ ໂມງ ປຸ່ມແລະຫຼັງຈາກນັ້ນໄດ້ ເວລາ ປຸ່ມ​ພ້ອມ​ກັນ​.

6.4. ກິດຈະກຳເປີດ/ປິດການຂຽນໂປຣແກຣມ

The TM619H-2 allows you to set multiple ON/OFF programs. Follow these steps:

1. ກົດ ເວລາ ປຸ່ມຫນຶ່ງຄັ້ງ. ຈໍສະແດງຜົນຈະສະແດງ "1 ON".
2. ກົດ ວັນ to select the day(s) for this ON event (e.g., Mon-Fri, Sat-Sun, every day, specific day).
3. ກົດ ຊົ່ວໂມງ to set the desired hour for the ON event.
4. ກົດ ນາທີ to set the desired minute for the ON event.
5. ກົດ ເວລາ ກົດປຸ່ມອີກຄັ້ງ. ໜ້າຈໍຈະສະແດງ "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the corresponding OFF event.
7. ສືບຕໍ່ກົດ ເວລາ to cycle through other program settings (2 ON, 2 OFF, etc.).
8. ຫຼັງ​ຈາກ​ການ​ຕັ້ງ​ຄ່າ​ໂຄງ​ການ​ທີ່​ຕ້ອງ​ການ​ທັງ​ຫມົດ​, ໃຫ້​ກົດ​ປຸ່ມ​ ໂມງ ເພື່ອອອກຈາກໂໝດການຂຽນໂປຣແກຣມ ແລະ ກັບຄືນໄປຫາການສະແດງເວລາປັດຈຸບັນ.

6.5. ການຍົກເລີກດ້ວຍຕົນເອງ

ໄດ້ ຄູ່ມື button allows you to override the programmed settings temporarily. Pressing this button cycles through different modes:

• ເປີດ: The output is continuously ON, ignoring programs.
• ເປີດອັດຕະໂນມັດ: The output is currently ON and will follow the next programmed OFF event.
• ປິດອັດຕະໂນມັດ: The output is currently OFF and will follow the next programmed ON event.
• ປິດ: The output is continuously OFF, ignoring programs.

Select "AUTO ON" or "AUTO OFF" for the timer to resume automatic operation based on your programs.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດອຸປະກອນດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການປ່ຽນແບັດເຕີຣີ: If the display becomes dim or programs are lost frequently during power interruptions, the 3V lithium backup battery may need replacement. Follow the battery installation steps in Section 5.1.
• ການກວດກາ: ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟເປັນໄລຍະໆວ່າມີຄວາມແໜ້ນໜາ ແລະ ຮ່ອງຮອຍຂອງການສວມໃສ່ຫຼືບໍ່.

8. ການແກ້ໄຂບັນຫາ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ ຫຼື ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເອກະສານທີ່ສະໜອງໃຫ້ຢູ່ຈຸດຊື້ ຫຼື ຕິດຕໍ່ຮ້ານຄ້າປີກຂອງທ່ານ. ເກັບໃບຮັບເງິນຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.