1. ບົດແນະນຳ
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 6L Ultrasonic Cleaner. This device utilizes ultrasonic cavitation to thoroughly clean various items, offering both Degas and Gentle cleaning modes for optimal results. Please read this manual carefully before use and retain it for future reference.
2. ຂໍ້ມູນຄວາມປອດໄພ
- ເຊື່ອມຕໍ່ເຄື່ອງກັບປລັກສຽບໄຟທີ່ມີດິນຢູ່ສະເໝີ.
- ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດໂດຍບໍ່ມີນໍ້າຢາຢູ່ໃນຖັງ.
- Ensure the power cord is not damaged and avoid pulling it to disconnect.
- Keep the unit away from water or other liquids to prevent electric shock.
- ຢ່າເອົາຫົວຫນ່ວຍຫຼັກຢູ່ໃນນ້ໍາ.
- ຖອດຫົວ ໜ່ວຍ ກ່ອນທີ່ຈະ ທຳ ຄວາມສະອາດຫລືປະຕິບັດການ ບຳ ລຸງຮັກສາ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- Use only recommended cleaning solutions. Avoid flammable or corrosive liquids.
- Do not touch the tank or solution during operation, as it may become hot.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- CREWORKS 6L Ultrasonic Cleaner Unit
- ກະຕ່າເຮັດຄວາມສະອາດເຫຼັກສະແຕນເລດ
- ຝາປິດ
- ສາຍໄຟ
- 34 fl oz (1000 mL) CREWORKS Heavy Duty Cleaner & Degreaser Solution
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
4. ຕັ້ງຄ່າ
- ການຈັດວາງ: Place the ultrasonic cleaner on a stable, flat, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
- ຕື່ມໃສ່ຖັງ: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the 'MIN' and 'MAX' marks. For general cleaning, use water. For enhanced cleaning, use the provided CREWORKS Heavy Duty Cleaner & Degreaser solution diluted at a 1:10 ratio with water.
- ໃສ່ກະຕ່າ: ໃສ່ກະຕ່າເຮັດຄວາມສະອາດລົງໃນຖັງ.
- ເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into the unit's power inlet, then connect it to a grounded electrical outlet.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The CREWORKS 6L Ultrasonic Cleaner features intuitive controls for temperature, time, and cleaning modes.
- ເປີດ: Turn the main power switch to the 'ON' position. The digital display will illuminate.
- ຕັ້ງຄ່າອຸນຫະພູມ: Use the 'TEMP' knob to set the desired cleaning temperature. The temperature range is 70-210°F (20-100°C). Heating helps improve cleaning efficiency, especially for stubborn grime.
- ຕັ້ງເວລາ: Use the 'TIME' knob to set the cleaning duration. The timer can be set from 1 to 30 minutes. For delicate items, start with a shorter duration.
- ເລືອກຮູບແບບທໍາຄວາມສະອາດ:
- Degas Mode: Press the 'DEGAS' button. This mode removes dissolved gases from the cleaning solution, which can improve ultrasonic efficiency and prevent oxidation of cleaned objects. It is recommended to run a degas cycle for a few minutes when using fresh solution.
- ໂໝດອ່ອນໂຍນ: Press the 'GENTLE' button. This mode reduces the ultrasonic intensity, providing a softer cleaning action suitable for delicate or sensitive items that might be damaged by full power cavitation.
- ເລີ່ມທໍາຄວາມສະອາດ: Once temperature, time, and mode are set, press the 'ON/OFF' button to start the ultrasonic cleaning process. The unit will automatically stop when the timer expires.
- ຫຼັງຈາກທໍາຄວາມສະອາດ: Turn off the unit, unplug it, and carefully remove the cleaning basket. Rinse the cleaned items with clean water and dry them thoroughly.
6. Using the CREWORKS Heavy Duty Cleaner & Degreaser Solution
The included 34 fl oz CREWORKS Heavy Duty Cleaner & Degreaser solution is designed to enhance the cleaning power of your ultrasonic cleaner, particularly for stubborn grease, oil, and grime.
- ການເຈືອຈາງ: This is a concentrated solution. Dilute it with water at a 1:10 ratio (1 part solution to 10 parts water) before adding it to the ultrasonic cleaner tank.
- ແອັບພລິເຄຊັນ: Ideal for cleaning engine parts, carburetors, gun parts, electronic components, bicycle chains, metals, and plastics. It effectively removes grease buildup, persistent residues, tight corner grime, and stubborn stains.
- ຄວາມເຂົ້າກັນໄດ້: Safe for use with most metals, alloys, and plastics. Always test on an inconspicuous area first if unsure.
7. ການບໍາລຸງຮັກສາແລະການທໍາຄວາມສະອາດ
- ການລະບາຍຖັງ (Draining the Tank): After each use, especially with cleaning solutions, drain the tank. Use the drain valve located on the side of the unit to empty the liquid into a suitable container.
- ທໍາຄວາມສະອາດຖັງໄດ້: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp ຜ້າ. ຫ້າມໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືຈຸ່ມຫົວໜ່ວຍຫຼັກໃນນ້ຳ.
- ການເກັບຮັກສາ: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.
8. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍບໍລິການບໍ່ເປີດ | No power supply; Power cord loose; Main switch off | Check power outlet; Ensure power cord is securely plugged in; Turn main switch to 'ON' |
| ຟັງຊັນ ultrasonic ບໍ່ເຮັດວຽກ | No liquid in tank; Timer not set; Unit overheated | Fill tank with liquid; Set timer; Allow unit to cool down |
| ຜົນການທໍາຄວາມສະອາດບໍ່ດີ | Incorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tank; Degas cycle not performed | Use appropriate solution (e.g., CREWORKS Degreaser); Increase time/temperature; Do not overload; Run a degas cycle for fresh solution |
| Solution not heating | Heater not activated; Temperature set too low | Ensure temperature knob is set above ambient; Allow time for heating |
9. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: CREWORKS 6L Ultrasonic Cleaner
- ຄວາມອາດສາມາດຂອງຖັງ: 6 ລິດ
- ພະລັງງານ Ultrasonic: 180W
- ພະລັງງານຄວາມຮ້ອນ: 300W
- ຄວາມຖີ່ຂອງການ ultrasonic: 40 kHz
- ການຄວບຄຸມອຸນຫະພູມ: 70-210°F (20-100°C)
- ການຄວບຄຸມເວລາ: 1-30 ນາທີ
- ໂໝດ: Degas, Gentle
- ການແກ້ໄຂທໍາຄວາມສະອາດ: CREWORKS Heavy Duty Cleaner & Degreaser (34 fl oz)
- ASIN: B0DYJCGRNQ
- ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 26 ກຸມພາ 2025
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or service inquiries, please refer to the official CREWORKS webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
