ແນະນຳ
This manual provides detailed instructions for the setup, programming, and operation of your RESTMO Sprinkler Timer, Model O-HT-1AW. Please read this manual thoroughly before use to ensure proper function and longevity of the device.

Image: RESTMO Sprinkler Timer, Model O-HT-1AW, connected to a garden faucet and hose, ready for use.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- 3 Independent Programs: Customize start times, durations (1 min - 4 hrs 59 mins), and frequencies (specific days) for diverse watering needs.
- Weekly Schedule Mode: Set exact days and times for irrigation, ideal for specific plant care or local watering regulations.
- Upgraded Waterproof & Durability: Seamless embedded screen prevents water ingress, and a rugged textured panel ensures longevity. IP55 waterproof protection.
- ໂໝດລ່າຊ້າຝົນ: Suspend watering for 24, 48, or 72 hours without losing programmed settings.
- ໂໝດການຫົດນໍ້າດ້ວຍມື: Initiate immediate watering from 1 minute to 299 minutes.
- ການຕັ້ງຄ່າງ່າຍດາຍ: Oversized dial and large LCD screen for intuitive programming and monitoring.
- ຄວາມເຂົ້າກັນໄດ້: Single outlet with solenoid valve, fitting for 3/4" hose and faucet. Operates with 8-120 psi water pressure.

Image: Visual representation of the timer's main features, including timed watering, manual control, rain delay, and waterproof design.
ຄູ່ມືການຕິດຕັ້ງ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The timer requires 2 x AAA Alkaline Batteries (not included). Ensure your hands are dry when handling batteries and the battery compartment to prevent moisture ingress.
- Open the waterproof battery compartment cover located on the back of the timer.
- ໃສ່ແບັດເຕີຣີອາຄາໄລນ໌ AAA ໃໝ່ສອງກ້ອນ, ໂດຍສັງເກດເບິ່ງຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
- Securely close the battery compartment cover to maintain its waterproof seal.
Video: Official guide demonstrating battery installation and initial setup steps for the RESTMO Sprinkler Timer.
2. ການເຊື່ອມຕໍ່ໂມງຈັບເວລາ
Connect the timer to your outdoor faucet and garden hose.
- Screw the timer's inlet (top connection) onto a standard 3/4" outdoor faucet. Ensure the built-in metal filter is in place to prevent debris from entering the timer.
- Screw your garden hose onto the timer's outlet (bottom connection).
- Tighten all connections by hand to prevent leaks. Do not overtighten.

Image: The sprinkler timer installed on a faucet with hoses attached, illustrating proper connection.
3. ການຕັ້ງໂມງ
- ຫັນ ໜ້າ ປັດໄປຫາ ຕັ້ງໂມງ.
- ໃຊ້ + / - buttons to set the current time (hour and minute).
- ກົດ OK ປຸ່ມເພື່ອສະຫຼັບລະຫວ່າງການຕັ້ງຄ່າຊົ່ວໂມງ ແລະນາທີ.
- Turn the dial to another position (e.g., ON) to save the changes.
Programming Watering Schedules
The timer features three independent programs (P1, P2, P3). Each program can be set with a unique start time, duration, and watering days.

ຮູບພາບ: ຫຼາຍກວ່າview of the three independent programming options (P1, P2, P3) and their customizable settings.
Setting Program 1 (P1)
- ຫັນ ໜ້າ ປັດໄປຫາ P1.
- ໃຊ້ + / - ປຸ່ມເພື່ອກໍານົດ ເລີ່ມເວລາ. ກົດ OK to confirm and move to ດົນປານໃດ.
- ໃຊ້ + / - buttons to set the watering ດົນປານໃດ (duration). Press OK to confirm and move to WATER DAY.
- ໃຊ້ + button to select desired watering days and the - button to unselect days.
- Turn the dial to another position (e.g., ON) to save the changes.
Setting Program 2 (P2)
Follow the same steps as Program 1, but turn the dial to P2 to set its independent schedule.
Setting Program 3 (P3)
Follow the same steps as Program 1, but turn the dial to P3 to set its independent schedule. To turn P3 off, keep pressing the - button until 'OFF' is displayed for the watering days.
ຮູບແບບການເຮັດວຽກ
ການຫົດນໍ້າອັດຕະໂນມັດ
Once programs are set, turn the dial to ON to activate automatic watering. The LCD screen will flash between the next watering start time and the current time when watering is OFF. When watering is ON, the LCD screen displays the remaining time of the current watering program.
ການຫົດນໍ້າດ້ວຍມື
To initiate manual watering:
- With the dial at ON and the timer not actively watering, long press the OK MANUAL ປຸ່ມສໍາລັບ 3 ວິນາທີ.
- ໃຊ້ + / - buttons to select the desired watering duration (1 min to 299 mins).
- ກົດ OK button to start manual watering.
- To cancel manual watering, turn the dial to ປິດ ແລະຫຼັງຈາກນັ້ນກັບຄືນໄປບ່ອນ ON.
ນໍ້າຝົນຊັກຊ້າ
To temporarily pause scheduled watering due to rain:
- With the dial at ON and the timer not actively watering, long press the ຊັກຊ້າ ປຸ່ມສໍາລັບ 3 ວິນາທີ.
- ໃຊ້ + / - buttons to select a delay of 24, 48, or 72 hours.
- ກົດ OK button or wait for 3 seconds for the rain delay to start automatically.
- To cancel rain delay, turn the dial to ປິດ ແລະຫຼັງຈາກນັ້ນກັບຄືນໄປບ່ອນ ON.

Image: The timer's display showing the rain delay function, allowing selection of 24, 48, or 72-hour delays.
ບໍາລຸງຮັກສາ
Cleaning the Filter Washer
The timer includes a built-in metal filter to prevent debris from entering the system. Periodically check and clean this filter to ensure optimal water flow and prevent blockages.
- ປິດການສະ ໜອງ ນ້ ຳ ໃສ່ກfauອກນ້ ຳ.
- ຖອດເຄື່ອງຈັບເວລາອອກຈາກ faucet.
- Remove the filter washer from the inlet.
- ລ້າງການກັ່ນຕອງພາຍໃຕ້ນ້ໍາແລ່ນເພື່ອເອົາສິ່ງເສດເຫຼືອທີ່ສະສົມ.
- Reinsert the clean filter washer and reattach the timer to the faucet.
ການເກັບຮັກສາລະດູຫນາວ
During freezing temperatures, remove the timer from the faucet and store it indoors to prevent damage from ice expansion.
ການແກ້ໄຂບັນຫາ
- ບໍ່ມີນ້ໍາໄຫຼ: Check if the faucet is fully open. Ensure the filter washer is clean and not blocked. Verify that the timer is set to ON and a program is active or manual watering is engaged.
- Timer not turning on/off: Check battery levels and replace if necessary. Ensure the battery compartment is securely closed. Verify that programs are correctly set and the dial is on ON.
- Leaks from connections: Ensure all connections are hand-tightened. Check if rubber washers are properly seated and not damaged. Replace washers if worn.
- ບັນຫາການສະແດງ: If the LCD screen is dim or unresponsive, replace batteries. If water intrusion is suspected, ensure the battery compartment is sealed and the screen is not damaged.
ຂໍ້ມູນຈໍາເພາະ
| ໝາຍເລກຕົວແບບ | O-HT-1AW |
| ຍີ່ຫໍ້ | Restmo |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຂະໜາດສິນຄ້າ | 5"D x 3"W x 5"H |
| ນ້ໍາຫນັກລາຍການ | 0.27 ກິໂລກຣາມ |
| ໄລຍະເວລາການຫົດນໍ້າ | 1-299 ນາທີ |
| ຄວາມຖີ່ຂອງການຫົດນໍ້າ | Monday to Sunday (7-day programmable) |
| ການປະເມີນກັນນ້ໍາ | IP55 |
| ຄວາມກົດດັນການເຮັດວຽກ | 8-120 PSI (0.5-8.0 Bar) |
| Inlet thread | 3/4" NH |
| ສູງສຸດທີ່ເຄຍ. ອັດຕາການໄຫຼ | 10 GPM (35 ລິດ/ນາທີ) |
| ຊ່ວງອຸນຫະພູມ | 38 ຫາ 120°F (3 ຫາ 50°C) |

Image: Detailed diagram illustrating the timer's dimensions and key technical specifications.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.