ເຄື່ອງຈັກອີໂຄເອເລີ YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. ບົດແນະນຳ

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

ຮູບພາບ: ຫຼາຍກວ່າview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

ການຄວບຄຸມດ້ວຍມືຟຣີ: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
ຄວາມເຂົ້າກັນໄດ້ທົ່ວໂລກ: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
ການຕິດຕັ້ງງ່າຍດາຍ: Fits standard junction boxes and requires a neutral wire.
ການອອກແບບທົນທານ: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

ຮູບພາບ: ລາຍລະອຽດ view of the product features and adjustable settings on the dimmer switch.

3. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

ອຸປະກອນນີ້ມີຈຸດປະສົງໃນການຕິດຕັ້ງຕາມລະຫັດໄຟຟ້າແຫ່ງຊາດແລະກົດລະບຽບທ້ອງຖິ່ນ.
ມັນແນະນໍາໃຫ້ຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິປະຕິບັດການຕິດຕັ້ງນີ້.
ໃຊ້ສາຍທອງແດງເທົ່ານັ້ນ.
ຕ້ອງມີສາຍທີ່ເປັນກາງສຳລັບການເຮັດວຽກທີ່ຖືກຕ້ອງ.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. ເນື້ອໃນຊຸດ

ECOELER Motion Sensor Dimmer Switch
ແຜ່ນຕິດຝາ
ຄໍາແນະນໍາການຕິດຕັ້ງ (ຄູ່ມືນີ້)
screws ການຕິດຕັ້ງ
ໝວກສາຍ

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

ຮູບພາບ: ຂະຫນາດຂອງຜະລິດຕະພັນແລະອຸປະກອນເສີມ.

5. ຂໍ້ມູນຈໍາເພາະ

ຄຸນລັກສະນະ	ມູນຄ່າ
ໝາຍເລກຕົວແບບ	YM2601-WH
ການດໍາເນີນງານ Voltage	120 ໂວນ (AC)
ການຈັດອັນດັບປັດຈຸບັນ	10 Amps
ວັດສູງສຸດtage (ໄຟ LED/CFL ທີ່ສາມາດປັບຄວາມສະຫວ່າງໄດ້)	150W
ວັດສູງສຸດtage (ໄຟຫຼອດໄຟ/ໄຟຮາໂລເຈນ)	300W
ປະເພດສະຫຼັບ	Single-pole (1-way)
ປະເພດການຕິດຕັ້ງ	ຕິດຝາ
ວັດສະດຸ	Copper, Metal, Polycarbonate
ຂະໜາດ (L x W x H)	6.86 x 4.2 x 11.48 cm
ການຢັ້ງຢືນ	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage ການຈັດອັນດັບ.

Image: Universal compatibility with various bulb types and their wattage ການຈັດອັນດັບ.

6. ການຕິດຕັ້ງ

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 ການຕິດຕັ້ງກ່ອນ

ປິດໄຟ: ຊອກຫາເບກເກີວົງຈອນ ຫຼື ກ່ອງຟິວຂອງທ່ານ ແລະ ປິດໄຟໄປທີ່ຕຳແໜ່ງສະວິດ. ກວດສອບວ່າໄຟຖືກປິດແລ້ວໂດຍໃຊ້ໄຟແຮງ.tage ເຄື່ອງທົດສອບ.
ເອົາປຸ່ມເກົ່າອອກ: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
ກໍານົດສາຍ: ລະບຸສາຍໄຟຕໍ່ໄປນີ້ຢູ່ໃນກ່ອງໄຟຟ້າຂອງເຈົ້າ:
- ສາຍຮ້ອນ (ສາຍ): Carries power from the circuit breaker.
- ໂຫຼດສາຍ: ເຊື່ອມຕໍ່ກັບອຸປະກອນແສງສະຫວ່າງ.
- ສາຍກາງ: (Required) Typically white, often capped together with other neutral wires.
- ສາຍດິນ: (Recommended) Typically bare copper or green.

6.2 ຄໍາແນະນໍາການສາຍ

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

ເຊື່ອມຕໍ່ ດຳ wire from the switch to the Hot (Line) wire from the wall.
ເຊື່ອມຕໍ່ ສີແດງ wire from the switch to the ໂຫຼດ wire from the wall.
ເຊື່ອມຕໍ່ ສີຂາວ wire from the switch to the ເປັນກາງ wire from the wall.
ເຊື່ອມຕໍ່ ສີຂຽວ wire from the switch to the ດິນ wire from the wall.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 ການຕິດຕັ້ງ ແລະ ການສຳເລັດຮູບ

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
ຕິດແຜ່ນຕິດຝາ.
ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. ຄໍາແນະນໍາການດໍາເນີນງານ

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

ຮູບແບບການຢູ່ອາໄສ (ເປີດອັດຕະໂນມັດ, ປິດອັດຕະໂນມັດ): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
ໂໝດຫວ່າງ (ເປີດດ້ວຍຕົນເອງ, ປິດອັດຕະໂນມັດ): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 ການປັບການຕັ້ງຄ່າ

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

ການຊັກຊ້າເວລາ: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
ຄວາມອ່ອນໄຫວ: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 ຟັງຊັນການຫຼຸດແສງ

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. ການແກ້ໄຂບັນຫາ

ໄຟບໍ່ເປີດ:
- ໃຫ້ແນ່ໃຈວ່າໄຟເປີດຢູ່ທີ່ເບຣກເກີ.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- ກວດສອບຈໍານວນທັງຫມົດtage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. ບໍາລຸງຮັກສາ

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

ທໍາຄວາມສະອາດ: Wipe the switch and wall plate with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
ຫຼີກລ້ຽງການຂັດຂວາງ: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
ກວດກາປົກກະຕິ: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The ECOELER Motion Sensor Dimmer Switch comes with a ຮັບປະກັນ 1 ປີ, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

ຜູ້ຜະລິດ: ECOELER ELECTRIC INC

ຕິດຕໍ່: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.