Swagtron EB7 / EB-7 Plus eBike Brushless DC Motor Controller (Xt60 Quick Disconnect) Instruction Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the installation, operation, and maintenance of your Swagtron EB7 / EB-7 Plus eBike Brushless DC Motor Controller with Xt60 Quick Disconnect. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect the eBike's battery before performing any installation or maintenance.
• Ensure all connections are secure and correctly matched to prevent electrical damage or malfunction.
• If you are unsure about any installation step, consult a qualified eBike technician.
• Keep the controller dry and protected from moisture.
• Do not attempt to modify the controller or its wiring, as this may void the warranty and create safety hazards.

3. ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດຂອງທ່ານ:

• 1 x Swagtron EB7 / EB-7 Plus eBike Brushless DC Motor Controller (Xt60 Quick Disconnect)
• Note: Additional components such as display, throttle, or motor are sold separately or are part of your existing eBike system.

4. ຄູ່ມືການຕິດຕັ້ງ

This section outlines the general steps for installing the motor controller. Specific wiring configurations may vary slightly depending on your eBike model. Always refer to your eBike's original wiring diagram if available.

4.1 Identifying the Controller

The Swagtron Brushless DC Motor Controller is a silver-colored rectangular unit with multiple wire harnesses extending from one end. It features a label indicating its specifications.

ຮູບພາບ 1: Swagtron EB7 / EB-7 Plus eBike Brushless DC Motor Controller. The image displays the silver controller unit with numerous colored wires and connectors, including an Xt60 quick disconnect, extending from its side. A label on the controller shows "Brushless DC Motor Controller," "Input Voltage: DC36V," "Min.Voltage: 31±1V," and other technical specifications.

ໝາຍເຫດສຳຄັນ: For Swagtron EB7 / EB-7 Plus eBikes, there are two different connector types. This specific controller features the Xt60 Quick Disconnect type. Ensure this matches your eBike's existing wiring before installation.

4.2 ຂັ້ນຕອນການເຊື່ອມຕໍ່

1. ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Ensure the eBike battery is completely disconnected before starting.
2. Locate Existing Controller: Identify the old motor controller on your eBike.
3. ຕັດການເຊື່ອມຕໍ່ສາຍ: Carefully disconnect all wires from the old controller. Pay attention to the color coding and connector types.
4. ເຊື່ອມຕໍ່ຕົວຄວບຄຸມໃໝ່: Connect the new Swagtron controller by matching the corresponding connectors. Common connections include:
   • Battery Power (Xt60): Connect the main power cable to the battery. This controller uses an Xt60 quick disconnect.
   • ສາຍໄຟເຟສມໍເຕີ: Typically three thicker wires (e.g., green, blue, yellow) connecting to the motor.
   • ສາຍໄຟເຊັນເຊີ Hall: A bundle of thinner wires (usually 5 or 6) connecting to the motor's Hall sensors.
   • ຄັນເລັ່ງ: Connect the throttle cable.
   • ເບກເບກ: Connect brake lever cut-off switches (if applicable).
   • Display/Control Panel: Connect the display unit cable.
   • Pedal Assist Sensor (PAS): Connect the PAS sensor cable (if applicable).
   • ໄຟ: Connect any integrated light cables.
5. ຕົວຄວບຄຸມທີ່ປອດໄພ: Mount the new controller securely in its designated location, ensuring it is protected from physical damage and moisture.
6. ເຊື່ອມຕໍ່ແບັດເຕີຣີຄືນໃໝ່: Once all connections are verified, reconnect the eBike battery.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

After successful installation, follow these steps to operate your eBike with the new controller.

5.1 Powering On and Basic Display Functions

The controller works in conjunction with your eBike's display unit. The video below demonstrates the basic functionality of a compatible display, including power-on, light control, and assist level adjustment.

• ເປີດ/ປິດ: Typically, press and hold the 'M' (Mode) button on the display to power the system on or off.
• ການປັບລະດັບການຊ່ວຍເຫຼືອ: Use the '+' and '-' buttons to cycle through different pedal assist levels (e.g., 0-5). Level 0 provides no motor assistance, while higher levels provide more power.
• ການຄວບຄຸມແສງ: A short press of the 'M' button or a dedicated light button may activate/deactivate the eBike's integrated lights.
• ການສະແດງຂໍ້ມູນ: The display typically shows current speed, battery charge level, assist level, and trip distance.

5.2 ການດໍາເນີນງານຂອງ Throttle

If your eBike is equipped with a throttle, it allows for motor assistance without pedaling. Gently twist or press the throttle to engage the motor. The amount of twist/press typically corresponds to the power output.

6. ບໍາລຸງຮັກສາ

• ການກວດກາປົກກະຕິ: ກວດສອບຈຸດເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ ແລະ ບໍ່ມີການກັດກ່ອນ ຫຼື ຄວາມເສຍຫາຍ.
• ທໍາຄວາມສະອາດ: Keep the controller and its connections clean and dry. Use a soft, dry cloth to wipe away dust or dirt. Avoid using water or harsh chemicals.
• ການປົກປ້ອງສິ່ງແວດລ້ອມ: Protect the controller from extreme temperatures, direct sunlight, and heavy rain.

7. ການແກ້ໄຂບັນຫາ

• ບໍ່ມີພະລັງງານເພື່ອສະແດງ/ມໍເຕີ:
  • ກວດເບິ່ງການເຊື່ອມຕໍ່ຫມໍ້ໄຟແລະລະດັບການສາກໄຟ.
  • Ensure all controller connections are firmly seated.
  • Inspect power cables for any visible damage.
• Motor Not Responding to Throttle/PAS:
  • Verify throttle and PAS sensor connections.
  • Check for any error codes on the display (e.g., a common issue resolved by replacing the controller).
  • Ensure the assist level is not set to 0.
• ການດໍາເນີນງານແບບບໍ່ຢຸດຢັ້ງ:
  • ກວດສອບສາຍໄຟທັງໝົດສຳລັບການເຊື່ອມຕໍ່ທີ່ວ່າງ ຫຼື ສາຍໄຟທີ່ຂາດ.
  • Ensure the controller is not overheating (though this is less common for a new unit).

If troubleshooting steps do not resolve the issue, contact Swagtron customer support or a certified eBike technician.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This Swagtron motor controller comes with a 30-Day Manufacturer Hardware Limited Warranty. For warranty claims or technical support, please refer to the official Swagtron webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ.

ນອກນັ້ນທ່ານຍັງສາມາດໄປຢ້ຽມຢາມໄດ້ Swagtron Store on Amazon ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມຜະລິດຕະພັນແລະຊັບພະຍາກອນສະຫນັບສະຫນູນ.