Amazon Basics Steam Mop for Hard Floors

ແນະນຳ

Thank you for choosing the Amazon Basics Steam Mop. This manual provides important information for the safe and efficient operation of your new steam mop. Please read it thoroughly before use and keep it for future reference. This 1200W steam mop is designed to effectively clean and sanitize sealed hard floors using only tap water, eliminating 99.9% of bacteria without harsh chemicals.

ຂໍ້ມູນຄວາມປອດໄພ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເມື່ອໃຊ້ເຄື່ອງໃຊ້ໄຟຟ້າເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟໄໝ້ ຫຼື ການບາດເຈັບ.

• Do not leave the steam mop unattended while plugged in.
• Do not use the appliance on unsealed wooden floors or unglazed ceramic tiles, as steam can cause damage.
• ຮັກສາເຄື່ອງໃຊ້ໃຫ້ຫ່າງຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
• Use only tap water in the water tank. Do not add cleaning solutions, perfumes, or other chemicals, as this may damage the appliance and void the warranty.
• Always unplug the appliance before filling or emptying the water tank, or before performing maintenance.
• ໃຫ້ແນ່ໃຈວ່າສາຍໄຟບໍ່ເສຍຫາຍ ຫຼື ພັນກັນໃນລະຫວ່າງການໃຊ້ງານ.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ສະ​ພາບ​ທີ່​ດີ​:

• 1 x Amazon Basics Steam Mop
• 3 x ແຜ່ນ Microfiber ລ້າງອອກໄດ້
• 1 x Filling Flask
• 1 x Plastic Scrubber

Image: The complete cleaning kit, including the steam mop, three microfiber pads, a filling flask, and a plastic scrubber.

ສິນຄ້າເກີນview

The Amazon Basics Steam Mop features a lightweight design with a self-standing function for convenient storage. It includes an extra-long 6m power cord with a cable management hook.

Image: The Amazon Basics Steam Mop in its upright, self-standing position.

ຕັ້ງຄ່າ

1. ປະກອບໄມ້ຖູພື້ນ: ເຊື່ອມຕໍ່ມືຈັບເຂົ້າກັບຕົວຖັງຫຼັກຂອງຜ້າຖູພື້ນຈົນກວ່າມັນຈະຄລິກເຂົ້າທີ່ຢ່າງປອດໄພ.
2. ຕິດຜ້າໄມໂຄຣໄຟເບີ: Place one of the washable microfiber pads onto the mop head, ensuring it is securely attached.
3. ຕື່ມນໍ້າໃສ່ຖັງນໍ້າ: Open the water tank cap. Use the provided filling flask to pour up to 450ml of clean tap water into the tank. Do not overfill. Close the cap securely.

Image: A hand pouring water into the steam mop's water tank using the provided filling flask.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ: Plug the steam mop into a suitable electrical outlet. The indicator light will illuminate.
2. ຮ້ອນ: Wait approximately 30 seconds for the mop to heat up and produce steam.
3. ເລືອກລະດັບ Steam: The mop features 3 steam levels (high/medium/low). Select the appropriate level for your cleaning needs using the control button.
4. ເລີ່ມທໍາຄວາມສະອາດ: Move the steam mop slowly and steadily across the sealed hard floor surface. The steam will clean and sanitize as you go. For stubborn spots, hold the mop over the area for a few seconds.
5. ສໍາເລັດຮູບທໍາຄວາມສະອາດ: When finished, unplug the mop and allow it to cool down before emptying any remaining water and removing the microfiber pad.

Image: Key features of the steam mop, highlighting its ability to clean sealed hard floors without chemicals, quick 30-second heat-up time, and a 6.10m power cable for extended reach.

ບໍາລຸງຮັກສາ

• ຜ້າເຊັດໄມໂຄຣໄຟເບີທີ່ເຮັດຄວາມສະອາດ: The microfiber pads are machine-washable. Wash them with similar colors and air dry. Do not use bleach or fabric softener.
• ຖັງນ້ຳເປົ່າ: After each use, ensure the water tank is emptied to prevent mineral buildup.
• ການເກັບຮັກສາ: Store the steam mop in an upright position using its self-standing feature. Use the cable management hook to keep the power cord tidy.
• ການປັບຂະ ໜາດ: If you notice reduced steam output, descaling may be necessary. Consult the full product manual for detailed descaling instructions.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Your Amazon Basics Steam Mop is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and how to obtain support, please refer to the warranty card included in your product packaging or visit the official Amazon Basics website. For technical assistance or customer service inquiries, please contact Amazon customer support.