1. ຜະລິດຕະພັນເກີນview
The ENVO EV-SL-60-12US is a 60W Linear LED Driver designed to convert 120VAC input to 12VDC output, suitable for various LED strip light applications in kitchens, cabinets, and other areas. This ultra-thin driver features integrated protection functions for enhanced safety and reliability.
Image 1.1: ENVO 60W Linear LED Driver (EV-SL-60-12US)
2. ຂໍ້ມູນຄວາມປອດໄພ
Please read all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- This product is designed for low voltage LED applications and meets Class II standards for electric shock protection.
- Integrated protection functions include open circuit, short circuit, and overload protection.
- ຮັບປະກັນການປ້ອນຂໍ້ມູນ voltage (120VAC) and output voltage (12VDC) are compatible with your electrical system and LED lights.
- ການຕິດຕັ້ງຄວນໄດ້ຮັບການປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຫຼືສອດຄ່ອງກັບລະຫັດໄຟຟ້າທ້ອງຖິ່ນ.
- ຢ່າໃຊ້ພະລັງງານເກີນພະລັງງານສູງສຸດtage ຂອງ 60W.
- The driver is UL certified (UL8750) for safety.
3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ
- ການ ດຳ ເນີນງານທີ່ປອດໄພ: Full protective plastic case for isolation, suitable for DIY and home applications.
- ການອອກແບບ Ultra-Slim: Perfect for narrow or tight spaces, can be installed behind extrusions or channels. Dimensions: 304.6mm x 30mm x 16.7mm (11.99" x 1.18" x 0.66").
- ການເຊື່ອມຕໍ່ງ່າຍ: Features screw terminals for fast and secure wiring.
- ປະສິດທິພາບພະລັງງານ: Low standby power design helps reduce electricity bills.
- ການປົກປ້ອງທີ່ສົມບູນແບບ: Includes open circuit, overload, short circuit, over temperature, and over voltage protection with auto-recovery and latch-off features.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps for proper installation of your LED driver.
4.1 ການຕິດຕັ້ງ
The ENVO LED driver is designed for independent surface mounting. Its super slim profile allows for installation in confined spaces.
- Choose a dry, well-ventilated location away from direct heat sources.
- Ensure adequate clearance around the driver for heat dissipation.
- Secure the driver using appropriate fasteners through its mounting points.
4.2 ແຜນວາດສາຍ
Connect the input and output wires as shown in the diagram below. Ensure all connections are secure using the screw terminals.
LED Power Supply Wiring Diagram
Image 4.1: Simplified Wiring Diagram for ENVO LED Driver
- Input (PRI): Connect the Live (L) and Neutral (N) wires from your 120VAC power source to the corresponding input terminals.
- Output (SEC): Connect the positive (+) and negative (-) wires of your 12VDC LED strip light to the corresponding output terminals.
- Ensure wire preparation is 7-8mm for optimal connection.
- Input and output cables are SPT-2 18AWG, with output cable length up to 2 meters.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Once properly installed and wired, the ENVO LED driver operates automatically. Simply apply power to the input, and the driver will provide stable 12VDC power to your connected LED lights.
- ກວດສອບການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພກ່ອນທີ່ຈະນໍາໃຊ້ໄຟ.
- ໃຫ້ແນ່ໃຈວ່າວັດທັງຫມົດtage of connected LED lights does not exceed 60W.
- The driver has a fast startup time of less than 1 second.
- ຊ່ວງອຸນຫະພູມໃຊ້ງານ: -20°C ຫາ 45°C.
- ລະດັບຄວາມຊຸ່ມຊື່ນສໍາພັນ: 45%-85%.
6. ບໍາລຸງຮັກສາ
The ENVO LED driver is designed for long-term, maintenance-free operation. However, periodic checks can ensure optimal performance and longevity.
- Keep the driver clean and free from dust and debris to ensure proper heat dissipation.
- ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດເປັນໄລຍະໆ ເພື່ອຄວາມແໜ້ນໜາ ແລະ ຮ່ອງຮອຍຂອງການສວມໃສ່.
- Do not attempt to open or repair the driver. Refer to qualified personnel for service.
- The expected lifetime of the driver is 30,000 hours.
7. ການແກ້ໄຂບັນຫາ
ຖ້າຫາກທ່ານພົບບັນຫາກັບຄົນຂັບ LED ຂອງທ່ານ, ເບິ່ງບັນຫາທົ່ວໄປດັ່ງຕໍ່ໄປນີ້ແລະການແກ້ໄຂ:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| LEDs ບໍ່ສະຫວ່າງ | No power to driver, loose connections, faulty LED strip, driver overload. | Check power supply, verify all wiring, test LED strip, ensure total wattage is within 60W. |
| ໄຟ LED ກະພິບ ຫຼືມືດມົວ | Unstable input power, loose connections, driver overload, faulty LED strip. | Check input power stability, verify wiring, reduce load, test LED strip. |
| Driver is hot to touch | Overload, insufficient ventilation, high ambient temperature. | Reduce load, ensure proper airflow, check ambient temperature (max case temp 80°C). |
| Driver shuts off intermittently | Overload protection, over temperature protection, short circuit. | Check for shorts, reduce load, ensure proper ventilation. Driver has auto-recovery. |
8. ຂໍ້ມູນຈໍາເພາະ
8.1 ຂໍ້ມູນສະເພາະດ້ານໄຟຟ້າ
| ລາຍການ | ສະພາບ | ຮ້ອງຂໍ |
|---|---|---|
| ປ້ອນຂໍ້ມູນ | ||
| ການປ້ອນຂໍ້ມູນ voltage | Ta | 90-132Vac |
| ຄວາມຖີ່ຂອງການປ້ອນຂໍ້ມູນ | 50Hz/60Hz | |
| ປ້ອນຂໍ້ມູນປັດຈຸບັນ | < 0.8A | |
| ພະລັງງານປ້ອນຂໍ້ມູນ | 25°C, rated input voltage, output with max. rated power | <70W |
| ປະສິດທິພາບ | ≥ 86% | |
| ສະແຕນບາຍ | 25°C, rated input voltage, output without load | <0.5W (Average) |
| Inrush ປະຈຸບັນ | 25°C, rated input voltage | <50A (Peak) |
| PF | 25°C, rated input voltage, output with max. rated power | ≥0.95 |
| ຜົນຜະລິດ | ||
| ເວລາເລີ່ມຕົ້ນ | 25°C, rated input voltage, output with max. rated power | <1ສ |
| ຜົນຜະລິດ voltage ແລະຄວາມແມ່ນຍໍາ | Ta, rated input voltage, output with max. rated power | 12V±5% |
| Output ໄລຍະປະຈຸບັນ | Ta, rated input voltage | 0-5A |
| ຜົນຜະລິດ voltage ຄື້ນ | 25°C, rated input voltage output with max. rated power | <300mV Vp-p |
| Output overload | 25°C, rated input voltage, output with 2 times LED load | ແມ່ນແລ້ວ |
8.2 Environmental & Mechanical Specifications
| ລາຍການ | ສະພາບ | ຮ້ອງຂໍ |
|---|---|---|
| Temperature and Others | ||
| ອຸນຫະພູມການດໍາເນີນງານ. | -20-45 ອົງສາ | |
| ຄວາມຊຸ່ມຊື່ນພີ່ນ້ອງ | 45%-85% | |
| ສູງສຸດ. ກໍລະນີອຸນຫະພູມ. | 80°C | |
| ຕະຫຼອດຊີວິດ | Max.Ta, rated input voltage, output with max. rated power | 30,000ຊມ |
| ສິ່ງລົບກວນການເຮັດວຽກ | 25°C, rated input voltage, output with rated power, mute box background noise <35dB, pickup 10cm distance from products | ແມ່ນແລ້ວ |
| Mechanical, Mounting | ||
| Case material and size | Plastic Case 304.6x30x16.7mm | |
| Mounting ways | ເອກະລາດ | |
| ປະເພດ insulation | ຫ້ອງຮຽນ II | |
| ລະດັບ IP | IP20 | |
| ຂະໜາດຂອງສາຍເຂົ້າ | SPT-2 18AWG | |
| ຂະໜາດສາຍອອກ | SPT-2 18AWG | |
| ຄວາມຍາວສາຍອອກ | ສູງສຸດ 2M | |
| ຄຸນສົມບັດການປົກປ້ອງ | ||
| ເປີດວົງຈອນ | Ta, rated input voltage, no load | ແມ່ນແລ້ວ |
| ໂຫຼດເກີນ | Ta, 0.94-1.06 times of input voltage, 2 times of rated | ແມ່ນແລ້ວ |
| ວົງຈອນສັ້ນ | Ta, 0.94-1.06 times of input voltage | ແມ່ນແລ້ວ |
| ອຸນຫະພູມເກີນ | Ta, 0.94-1.06 times of input voltage, temperature detected point more than 115 degree | ແມ່ນແລ້ວ |
| ເກີນ voltage | Ta, 0.94-1.06 times of input voltage, ຜົນຜະລິດ voltage is 1.5 times of rated one | ແມ່ນແລ້ວ |
| ການຟື້ນຕົວອັດຕະໂນມັດ | Over load, short circuit, over heat revocation | ແມ່ນແລ້ວ |
| Latch off | ເກີນ voltage re-start after cut off | ແມ່ນແລ້ວ |
8.3 ການປະຕິບັດຕາມມາດຕະຖານ
| ລາຍການ | ເງື່ອນໄຂ | ມາດຕະຖານ |
|---|---|---|
| ຄວາມປອດໄພ | UL8750 | |
| EMI | FCC PART15 CLASSB |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The ENVO EV-SL-60-12US LED Driver comes with a ຮັບປະກັນ 5 ປີ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.
- For warranty claims or technical support, please contact ENVO customer service.
- Our products are locally stocked in the US for efficient service and support.
- ກະລຸນາເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອກວດສອບການຮັບປະກັນ.
For further assistance, please visit the ENVO store on Amazon or contact our support team directly.