1. ບົດແນະນຳ
Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.

Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.
2. ຂໍ້ມູນຄວາມປອດໄພ
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
- Do not connect directly to 120V household current.
- Ensure power is disconnected at the transformer before installing or servicing the fixture.
- All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
- Do not operate the fixture with a damaged cord or if the lens is cracked.
- ຮັກສາເດັກນ້ອຍແລະສັດລ້ຽງຢູ່ຫ່າງຈາກພື້ນທີ່ຕິດຕັ້ງ.
- This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.
3. ສິ່ງທີ່ຢູ່ໃນກ່ອງ
ຊຸດປະກອບມີອົງປະກອບດັ່ງຕໍ່ໄປນີ້:
- VOLT Stemless Directional Brass Path Light
- 9-inch Ground Stake
- Mounting Hardware (for surface mounting)
ໝາຍເຫດ: A G4 LED bi-pin bulb and a low voltagໝໍ້ແປງໄຟຟ້າຂາຍແຍກຕ່າງຫາກ ແລະ ຈຳເປັນສຳລັບການເຮັດວຽກຢ່າງເຕັມທີ່.
4. ຄຸນສົມບັດ
- Pro ຕໍ່າfile ການອອກແບບ: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
- ການກໍ່ສ້າງລະດັບມືອາຊີບ: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
- Lamp ພ້ອມ: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
- ການຕິດຕັ້ງແບບອະເນກປະສົງ: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
- ຄວາມຕ້ານທານຕໍ່ການກັດກ່ອນ: Features a beryllium copper socket for enhanced corrosion resistance.
- Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
- UL/cUL ລາຍຊື່: ຮັບປະກັນການປະຕິບັດຕາມມາດຕະຖານຄວາມປອດໄພ.
5. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນລັກສະນະ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | VOLT |
| ຊື່ຕົວແບບ | VOLT Stemless Directional Brass Path Light |
| ໝາຍເລກຕົວແບບ | BDL-VPL-1053-4-BBZ-ZON |
| ສີ | ທອງແດງ |
| ວັດສະດຸ | ທອງເຫລືອງ, ໂລຫະ |
| ຂະໜາດສິນຄ້າ | 2.71"L x 2.71"W x 1.96"H |
| ຮູບແບບ Fixture ແສງສະຫວ່າງ | ເສັ້ນທາງ |
| ແຫຼ່ງພະລັງງານ | Corded Electric (Low Voltage) |
| ສະບັບtage | 12 ໂວນ (AC) |
| ປະເພດແຫຼ່ງແສງ | LED (G4 Bi-pin bulb, not included) |
| Bulb Base | G4 |
| ວັດສູງສຸດtage | 20W (for G4 LED bi-pin bulb) |
| ປະເພດການຕິດຕັ້ງ | Surface Mount, Ground Stake |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ກາງແຈ້ງ |
| ລະດັບຄວາມຕ້ານທານນ້ໍາ | ກັນນ້ຳ |
| ການຢັ້ງຢືນ | UL/cUL ລາຍຊື່ |
6. ການຕິດຕັ້ງ
Before beginning installation, ensure the power to your low voltage transformer is turned OFF.
6.1. ການຕິດຕັ້ງຫລອດໄຟ
- Carefully remove the top cap of the path light by unscrewing it.
- Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
- Replace the top cap, screwing it firmly to ensure a moisture-tight seal.

ຮູບພາບ: A close-up view of the VOLT Stemless Directional Brass Path Light, showing its compact design.
6.2. ຕົວເລືອກການຕິດຕັ້ງ
The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:
6.2.1. Ground Stake Installation
- Thread the path light onto the included 9-inch PVC ground stake.
- Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
- Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
- ເສັ້ນທາງ vol ຕ່ໍາtage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.2.2. Surface Mounting
- Identify the desired surface for mounting (e.g., deck, patio edge).
- Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
- Ensure the fixture is securely fastened and stable.
- ເສັ້ນທາງ vol ຕ່ໍາtage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.
6.3. Wiring to Transformer
- ເຊື່ອມຕໍ່ຕ່ໍາ voltage wire from the path light to the common and 12V terminals on your low voltage ການຫັນເປັນ.
- ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແຫນ້ນແຫນ້ນແລະປອດໄພ.
- Once all fixtures are installed and wired, turn on the power at the transformer.
ວິດີໂອ: ວິດີໂອນີ້ສະຫນອງໃຫ້ຫຼາຍກວ່າview of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.
7. ຄໍາແນະນໍາການດໍາເນີນງານ
The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.
- Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
- Ensure the transformer is set to the desired operating schedule.
8. ບໍາລຸງຮັກສາ
Regular maintenance will help ensure the longevity and optimal performance of your path light.
- ທໍາຄວາມສະອາດ: Periodically clean the fixture and lens with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
- ການທົດແທນດອກໄຟ: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
- ການກວດກາສາຍໄຟ: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
- ຄວາມຫມັ້ນຄົງຂອງ Fixture: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.
9. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແສງບໍ່ເປີດ | No power to transformer ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ ຫຼອດໄຟຜິດປົກກະຕິ Transformer timer/photocell setting | Check power supply to transformer Inspect and tighten all wire connections ປ່ຽນຫລອດໄຟ Adjust transformer settings |
| ແສງສະຫວ່າງ flickers | ຫລອດໄຟ ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ bulb ບໍ່ເຂົ້າກັນໄດ້ | Ensure bulb is fully seated Inspect and tighten all wire connections Ensure G4 LED bi-pin bulb is compatible with 12V AC systems |
| ແສງສະຫວ່າງອ່ອນໆ | ລະດັບສຽງຕ່ ຳtage ຈາກຫມໍ້ແປງ ເລນເປື້ອນ Bulb ວັດtage ຕ່ໍາເກີນໄປ | Check transformer output voltage ເຮັດຄວາມສະອາດເລນ ແທນທີ່ດ້ວຍວັດທີ່ສູງກວ່າtage G4 LED bi-pin bulb (up to 20W) |
10. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ
The VOLT Stemless Directional Brass Path Light is backed by a ຮັບປະກັນຕະຫຼອດຊີວິດ. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.
For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting webເວັບໄຊທ໌ ຫຼື ເອກະສານການຊື້ຂອງທ່ານສຳລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນ.
ຜູ້ຜະລິດ: ແສງ VOLT
UPC: 842032134007