Acouto 5V-24V Motor Control Board with Multifunction Time Delay Relay User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the Acouto 5V-24V Motor Control Board, a versatile module designed for controlling DC/AC motor forward and reverse operations with integrated time delay relay functions. It supports multiple control modes and offers customizable timing and cycle settings for various applications.

2. ຜະລິດຕະພັນເກີນview

ຮູບ 1: ດ້ານຫນ້າ view of the Acouto motor control board, featuring a digital display, two blue relays, and several control buttons (SET, ++, --, OK) on the right side. Input and output terminals are visible along the edges.

ຮູບ 2: ກັບຄືນໄປບ່ອນ view of the Acouto motor control board, displaying the green PCB with circuit traces and the text 'MADE IN CHINA' and 'eletechsup AC/DC Motor Reversing Controller 1053A02'.

2.1 ລັກສະນະທີ່ສໍາຄັນ

• ຕົວເລືອກການຄວບຄຸມທີ່ຫຼາກຫຼາຍ: Offers input control options for forward, reverse, and stop functions, catering to various user preferences and needs.
• Flexible Trigger Modes: Supports two input trigger modes: Low-Pulse trigger mode and Low-Level trigger mode, allowing users to select the mode that suits their application for accurate and efficient motor control.
• ເວລາຊັກຊ້າທີ່ສາມາດປັບແຕ່ງໄດ້: Features a precise timing control with delay options ranging from 0.1 seconds to 9999 minutes, enabling users to tailor the controller's performance to specific requirements.
• Effective Cycle Options: Cycle times can be set to no cycle, 2-99 cycles, or always cycle, providing flexibility to customize motor operation and achieve optimal results in various scenarios.
• ໄຟສັນຍານທີ່ຊັດເຈນ: Equipped with three LED indicators (Forward, Reverse, Stop) for easy monitoring of the motor's status at a glance, ensuring quick and efficient troubleshooting when necessary.

3. ຂໍ້ມູນຈໍາເພາະ

• ການສະຫນອງພະລັງງານ: Two options (do not power simultaneously):
  • Power Supply 1 (DC 5.5MM female jack): DC 5V
  • Power Supply 2 (VIN/GND terminals): DC 6.5-25V
• ປະຈຸບັນເຮັດວຽກ:
  • Normal Mode: Standby 41mA, Working 83mA
  • Energy-Saving Mode: Standby 7mA, Working 44mA
• Input Control Ports: Forward (FWD), Reverse (REV), Stop (STOP)
• Input Trigger Modes: Low-Pulse trigger mode, Low-Level trigger mode
• ຊ່ວງເວລາລ່າຊ້າ: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes
• ເວລາຮອບວຽນ: No cycle, 2-99 cycles, Always cycle
• ຕົວຊີ້ວັດ: Forward (F LED), Reverse (R LED), Stop (S LED)
• Relay Load Current: Recommended less than 5A

3.1 ລາຍລະອຽດພອດ

• DC 5.5MM female: Power supply 1, DC 5V input.
• VIN: Power supply 2 positive, DC 6.5-25V input.
• GND: Power supply 2 negative.
• FWD: Forward input control (functionality may vary based on selected mode).
• REV: Reverse input control (functionality may vary based on selected mode).
• ຢຸດ: Stop input control (functionality may vary based on selected mode).
• M+: Motor positive output.
• M-: Motor negative output.
• P+: Positive terminal for motor power supply (if separate motor power is used).

Figure 3: Dimensions of the control board, measuring approximately 8cm (3.2in) in length and 3.2cm (2in) in width.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1 ການເຊື່ອມຕໍ່ພະລັງງານ

1. Choose one power supply option: either connect a DC 5V power source to the DC 5.5MM female jack, or connect a DC 6.5-25V power source to the VIN and GND terminals. Do not connect both power supplies simultaneously.
2. ຮັບປະກັນການສະຫນອງພະລັງງານ voltage is within the specified range to prevent damage to the module.

4.2 ການເຊື່ອມຕໍ່ມໍເຕີ

1. Connect the positive terminal of your DC motor to the M+ terminal on the control board.
2. Connect the negative terminal of your DC motor to the M- terminal on the control board.
3. If your motor requires a separate power supply, connect its positive terminal to P+ and its negative terminal to M-. Ensure the motor power supply is appropriate for your motor.
4. Ensure the relay load current does not exceed the recommended 5A.

4.3 Control Input Connections

ຮູບທີ 4: ມຸມ view highlighting the VIN, GND, FWD, REV, and STOP input terminals for power and control signals.

1. Connect your control signals (e.g., from buttons, microcontrollers) to the FWD, REV, and STOP input terminals.
2. Refer to the specific function mode selected for how these inputs will trigger actions (Low-Pulse or Low-Level).

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The control board features a digital display and several buttons (SET, ++, --, OK) for configuration. The exact operational modes and their settings are determined by the firmware. This section provides general guidance.

Figure 5: Close-up of the control buttons and digital display, used for setting parameters.

5.1 ການດໍາເນີນງານພື້ນຖານ

• Forward Control: Apply a trigger signal to the FWD input. The F LED will illuminate, and the motor will run in the forward direction.
• Reverse Control: Apply a trigger signal to the REV input. The R LED will illuminate, and the motor will run in the reverse direction.
• Stop Control: Apply a trigger signal to the STOP input. The S LED will illuminate, and the motor will stop.

5.2 Setting Delay Times and Cycles

1. ກົດ SET button to enter the parameter setting mode. The digital display will show the current parameter.
2. ໃຊ້ ++ ແລະ -- buttons to adjust the value of the displayed parameter (e.g., delay time, cycle count).
3. ກົດ SET again to move to the next parameter or to confirm the current setting.
4. ກົດ OK button to save all settings and exit the parameter setting mode.
5. The delay time can be set in seconds (0.1-999.9s, 1-9999s) or minutes (1-9999min). The unit is typically indicated on the display or by a specific mode.
6. Cycle times can be configured for no cycle, a specific number of cycles (2-99), or continuous cycling.

6. ບໍາລຸງຮັກສາ

• Keep the control board clean and free from dust and moisture.
• ຫຼີກລ່ຽງການໃຫ້ກະດານຖືກອຸນຫະພູມສູງ ຫຼື ແສງແດດໂດຍກົງ.
• Regularly check all wire connections to ensure they are secure.
• Do not attempt to repair the board if you are not qualified. Contact a professional if issues arise.

7. ການແກ້ໄຂບັນຫາ

• ບໍ່ມີພະລັງງານ / ຈໍສະແດງຜົນປິດ:
  • ກວດສອບການເຊື່ອມຕໍ່ແຫຼ່ງຈ່າຍໄຟ ແລະ ຮັບປະກັນວ່າມີລະດັບສຽງtage is within the specified range (DC 5V or DC 6.5-25V).
  • Verify that only one power supply option is connected.
• ມໍເຕີບໍ່ຕອບສະໜອງ:
  • Ensure motor connections (M+, M-) are correct and secure.
  • Check if the control input signals (FWD, REV, STOP) are being correctly applied according to the selected trigger mode.
  • Verify that the motor's current draw does not exceed the relay's 5A capacity.
  • Confirm that the selected operating mode and delay settings are appropriate.
• ທິດທາງມໍເຕີບໍ່ຖືກຕ້ອງ:
  • Reverse the M+ and M- connections to change the motor's default direction.
• ຕົວຊີ້ວັດ LED ບໍ່ເຮັດວຽກ:
  • Ensure the board is powered correctly and the corresponding function is active.

8. ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect power before making any connections or adjustments to the board.
• Ensure proper insulation for all wiring to prevent short circuits.
• ຢ່າເກີນ vol ທີ່ລະບຸໄວ້tage and current ratings for the power supply and motor load.
• This product is an electronic component; handle with care to avoid electrostatic discharge.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.