SEBSON IR_ES_EA

SEBSON Recessed Ceiling Motion Detector (IR_ES_EA) - Anthracite

ຄູ່ມືການສອນ

1. ບົດແນະນຳ

Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.

ດ້ານໜ້າ view of the SEBSON recessed ceiling motion detector with key specifications overlaid: 8m/360° detection, up to 1000W LED, IP20, 10sec-30min timer, 3-2000 LUX, 230V.
ຮູບ 1: ເກີນview of the motion detector and its main features.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

  • ການຕິດຕັ້ງຕ້ອງໄດ້ປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຕາມກົດລະບຽບສາຍໄຟທ້ອງຖິ່ນ.
  • Disconnect power at the main circuit breaker before installation or maintenance.
  • Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
  • ຜະລິດຕະພັນນີ້ຖືກອອກແບບມາສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. ຫຼີກເວັ້ນການສໍາຜັດກັບຄວາມຊຸ່ມຫຼືອຸນຫະພູມທີ່ຮຸນແຮງ.
  • ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມຮອບອຸປະກອນ.

3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

  • Indoor motion detector for recessed ceiling mounting.
  • Wide detection range of 8 meters and 360 degrees.
  • Adjustable operating duration from 10 seconds to 30 minutes.
  • ຄວາມອ່ອນໄຫວຕໍ່ແສງອ້ອມຂ້າງທີ່ສາມາດປັບໄດ້ຕັ້ງແຕ່ 3 ຫາ 2000 lux.
  • Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
  • 3-wire connection for reliable operation.

4. ເນື້ອໃນຊຸດ

  • 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
  • 1x ຄູ່ມືການສອນ

5. ການຕິດຕັ້ງ

ສຳຄັນ: Ensure power is disconnected at the main circuit breaker before starting installation.

  1. Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
  2. Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
  3. Insert the detector into the prepared hole. The spring clips will secure it in place.
  4. Restore power and test the functionality.

5.1. ຜະລິດຕະພັນເກີນview ແລະຂະຫນາດ

ດ້ານໜ້າ view of the SEBSON recessed ceiling motion detector in anthracite color.
ຮູບ 2: ດ້ານຫນ້າ view of the motion detector. This image shows the anthracite-colored circular housing with the central infrared sensor dome.
Technical drawing showing the dimensions of the motion detector: 75mm diameter, 42mm height, 60mm internal width, 34mm internal height, 31mm spring length, 3mm bezel thickness.
Figure 3: Detailed dimensions of the motion detector. The overall diameter is 75mm, and the height is 42mm. The mounting hole diameter should be between 63-66mm.
ຂ້າງ view diagram illustrating the recessed installation, showing a minimum installation depth of 45mm and a ceiling thickness of up to 20mm.
Figure 4: Installation depth requirement. A minimum depth of 45mm is needed for proper recessed mounting.
ຫລັງ view of the motion detector showing the wiring terminal block and spring clips.
ຮູບ 5: ດ້ານຫລັງ view showing the wiring terminal. This is where the Live, Neutral, and Switched Live wires are connected.

6. ການດໍາເນີນງານແລະການປັບຕົວ

The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).

ຫລັງ view of the motion detector showing the 'TIME' and 'LUX' adjustment dials. The TIME dial ranges from 10s to 30min, and the LUX dial from 3 to 2000 lux.
Figure 6: Adjustment dials for TIME and LUX settings.

6.1. TIME ການປັບຕົວ

ປຸ່ມໝຸນ 'TIME' ຄວບຄຸມໄລຍະເວລາທີ່ໄຟທີ່ເຊື່ອມຕໍ່ຈະເປີດຢູ່ຫຼັງຈາກກວດພົບການເຄື່ອນໄຫວ ແລະ ບໍ່ຮັບຮູ້ການເຄື່ອນໄຫວເພີ່ມເຕີມ. ໝຸນປຸ່ມໝຸນເພື່ອຕັ້ງໄລຍະເວລາທີ່ຕ້ອງການ:

  • 10ວິ: Minimum duration (10 seconds).
  • 30 ນາທີ: Maximum duration (30 minutes).

6.2. LUX Adjustment

The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.

  • 3: Activates only in very dark conditions (e.g., night).
  • 2000: Activates in all light conditions (day and night).

To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.

6.3. ໄລຍະການກວດຫາ

Diagram showing the 360-degree detection area of the motion detector, with a maximum range of 8 meters and an installation height between 1.8m and 4m.
Figure 7: Detection range and angle. The detector covers a 360-degree area with a maximum range of 8 meters when installed at a height between 1.8m and 4m.

The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.

7. ບໍາລຸງຮັກສາ

The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8. ການແກ້ໄຂບັນຫາ

ບັນຫາ ສາເຫດທີ່ເປັນໄປໄດ້ ການແກ້ໄຂ
ແສງບໍ່ໄດ້ເປີດ.
  • ບໍ່ມີການສະຫນອງພະລັງງານ.
  • LUX setting too low (too dark).
  • No motion detected within range.
  • ສາຍໄຟຜິດພາດ.
  • ກວດເບິ່ງຕົວຕັດວົງຈອນແລະການເຊື່ອມຕໍ່.
  • Adjust LUX dial towards the sun symbol.
  • Ensure motion occurs within the detection zone.
  • ຢືນຢັນການເຊື່ອມຕໍ່ສາຍໄຟ.
Light stays on constantly.
  • Continuous motion in detection zone.
  • ການ​ຕັ້ງ​ຄ່າ TIME ຍາວ​ເກີນ​ໄປ.
  • ສາຍໄຟຜິດພາດ (ເຊັ່ນ: ປ່ຽນການເຊື່ອມຕໍ່ແບບຖາວອນ).
  • Clear detection zone of constant movement.
  • ປັບການໂທຫາ TIME ເປັນໄລຍະເວລາທີ່ສັ້ນກວ່າ.
  • ກວດສອບສາຍໄຟສຳລັບການເຊື່ອມຕໍ່ທີ່ຖືກຕ້ອງ.
ໄຟເປີດໂດຍບໍ່ມີການເຄື່ອນໄຫວທີ່ຊັດເຈນ.
  • Heat sources (e.g., heater, direct sunlight).
  • Air currents (e.g., open window, AC vent).
  • ສັດນ້ອຍ.
  • Relocate detector or remove interfering objects.
  • Ensure stable environment.
  • Adjust sensitivity if possible (this model does not have explicit sensitivity adjustment, but careful placement can help).

9. ຂໍ້ມູນຈໍາເພາະ

ຍີ່ຫໍ້ SEBSON
ໝາຍເລກຕົວແບບ IR_ES_EA
ສີ Anthracite
ຂະໜາດ (L x W x H) 7.5 x 7.5 x 7.5 cm
ນ້ຳໜັກ 110 ກຣາມ
ປະເພດການຕິດຕັ້ງ ເພດານ (ເພດານ)
Mounting Hole ເສັ້ນຜ່າສູນກາງ 63-66 ມມ
ແຫຼ່ງພະລັງງານ ໄຟຟ້າ AC
ນ້ຳໜັກສູງສຸດ (ໄຟຫລອດ) 2000 ວ
Max Load (LED/Energy Saving) 1000 ວ
ໄລຍະການກວດຫາ 8 ແມັດ
ມຸມກວດຫາ 360°
Operating Duration (TIME) 10 ວິນາທີ - 30 ນາທີ
Ambient Light Sensitivity (LUX) 3 - 2000 ລຸກ
ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ Basic lighting controls
ການນໍາໃຊ້ທີ່ແນະນໍາ Residential security, commercial security, automation, energy management
ປະເທດຕົ້ນກໍາເນີດ ຈີນ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

© 2026 SEBSON. ສະຫງວນລິຂະສິດທຸກປະການ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.