DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ample ພື້ນທີ່ສໍາລັບການເກັບຮັກສາຂໍ້ມູນ.
• ການຕິດຕັ້ງ GPU ແນວຕັ້ງ: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• ຄວາມເຂົ້າກັນໄດ້ຂອງເມນບອດ: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Advanced Cooling Support: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• ການໄຫຼວຽນຂອງອາກາດທີ່ດີທີ່ສຸດ: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• ການເຊື່ອມຕໍ່ແຜງດ້ານໜ້າ: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. ຂໍ້ມູນຈໍາເພາະ

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. ຄູ່ມືການຕິດຕັ້ງ

4.1. ການກະກຽມກໍລະນີ

1. ແກະກ່ອງອອກ: Carefully remove the computer case from its packaging.
2. ເອົາແຜງດ້ານຂ້າງອອກ: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. ກວດກາອຸປະກອນເສີມ: Verify all included accessories (screws, cable ties, manual) are present.

4.2. ການຕິດຕັ້ງເມນບອດ

1. ຕິດ​ຕັ້ງ Standoffs​: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. ຕິດຕັ້ງ I/O Shield: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. Mount Motherboard: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. ການຕິດຕັ້ງບັດກາຟິກ (GPU).

• ການຕິດຕັ້ງມາດຕະຖານ: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• ການຕິດຕັ້ງແນວຕັ້ງ: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. ການຕັ້ງຄ່າລະບົບເຮັດຄວາມເຢັນ

• ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

ຮູບພາບ: ລະເບີດ view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

• ເປີດ/ປິດ: Use the power button located on the top front panel to turn the system on or off.
• ປຸ່ມຣີເຊັດ: The reset button is also on the top front panel for system restarts.
• ຜອດແຜງດ້ານໜ້າ: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. ບໍາລຸງຮັກສາ

• ການເຮັດຄວາມສະອາດກອງຂີ້ຝຸ່ນ: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• ທໍາຄວາມສະອາດພາຍໃນ: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. ການແກ້ໄຂບັນຫາ

• ລະບົບບໍ່ເປີດ:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Check all internal power connections (24-pin ATX, CPU power, GPU power).
  • Verify front panel power button cables are correctly connected to the motherboard.
• ບໍ່ມີການສະແດງຜົນອອກ:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • ຣີເຊັດບັດກາຟິກ ແລະໂມດູນ RAM.
• ບັນຫາຄວາມຮ້ອນເກີນ:
  • Ensure all case fans are spinning and connected correctly.
  • ທຳຄວາມສະອາດຕົວກອງຝຸ່ນ ແລະ ອົງປະກອບພາຍໃນ.
  • ກວດສອບວ່າຕົວເຮັດຄວາມເຢັນ CPU ຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ແລະ ສຳຜັດກັບ CPU ໄດ້ດີ.
• ບໍ່ກວດພົບ Drive:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

The DARKROCK Classico Max computer case comes with a ຮັບປະກັນ 1 ປີ ນັບຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຈາກການຜະລິດ ແລະ ຂໍ້ບົກພ່ອງຂອງວັດສະດຸພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮັບປະກັນຄວາມຖືກຕ້ອງ.

Official DARKROCK Store: DARKROCK Amazon Store

9. ຫ້ອງວາງສະແດງສື່

ຮູບພາບ: ດ້ານຫນ້າ view of the DARKROCK Classico Max computer case.

ຮູບພາບ: ພາຍໃນ view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

ຮູບພາບ: ລະເບີດ view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

ວິດີໂອ