ຄູ່ມືການໃຊ້ງານເຄື່ອງແກະສະຫຼັກເລເຊີ ATOMSTACK P9 M50

1. ບົດແນະນຳ

The ATOMSTACK P9 M50 is a portable and professional laser engraver designed for various materials including wood, leather, metal, and more. This manual provides essential information for safe operation, setup, and maintenance of your device, ensuring optimal performance and longevity.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines to prevent injury.

• ການປົກປ້ອງຕາ: The laser module includes a protective cover. While this cover helps, it is highly recommended to wear additional laser safety goggles (not included) during operation to ensure maximum eye protection.
• ການຢຸດສຸກເສີນ: Familiarize yourself with the emergency stop button. In case of any unexpected situation, press this button immediately to halt all machine operations. Rotate the button to disengage it before restarting.
• ການລະບາຍອາກາດ: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting. Consider using an exhaust system.
• ຄວາມປອດໄພວັດສະດຸ: Do not engrave or cut unknown materials. Some materials can produce toxic fumes or catch fire. Always verify material compatibility and safety data.
• ການເບິ່ງແຍງກວດກາ: Never leave the machine unattended during operation. Stay within close proximity to monitor the process.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: Keep children and pets away from the operating area and the machine at all times.

Figure 2.1: Emergency Stop Button and Control Panel. The red button is the emergency stop, the silver button is On/Off, and the small button is Reset.

3. ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:

• 1 x ATOMSTACK P9 M50 Laser Engraving Machine
• Parts for screw assembly (steps 2/3/4/5)
• 1 x Anti-dust cloth
• 1 x Tool set
• 1 x Fixed focus film
• 3 x Acrylic panels
• 3 x Wood chips
• 1 x ເຄື່ອງອ່ານບັດ
• 5 x ສາຍເຄເບີ້ນ
• 1 x Accessory package
• 1 x Display assembly
• 1 x Display cable
• 1 x ຕົວແປງໄຟ
• 1 x ສາຍໄຟ
• ສາຍໄຟ 1 x
• 1 x Metal cutting support plate
• 1 x ຄູ່ມື
• 1 x Laser assembly
• 1 x X-axis assembly
• 1 x Y-axis assembly
• 2 x ສະຫນັບສະຫນູນຕີນ
• 4 x Mounting spacers

4. ຄູ່ມືການຕິດຕັ້ງ

The ATOMSTACK P9 M50 comes 85% pre-assembled, simplifying the setup process. Follow these steps to prepare your engraver for use:

1. ການຫຸ້ມຫໍ່: Carefully remove all components from the packaging and place them on a clean, stable surface.
2. ກອບກອບ: Connect the X-axis and Y-axis assemblies as per the included manual's diagrams. Secure them using the provided screws and tools. Ensure all connections are firm.
3. Laser Module Installation: Mount the laser assembly onto the X-axis carriage. Ensure it is securely fastened and the cables are properly connected.
4. ຕີນ​ສະ​ຫນັບ​ສະ​ຫນູນ​: Attach the two support feet to the base of the machine for stability.
5. Control Terminal: Connect the independent control terminal to the main unit using the display cable. The terminal features a magnetic adsorption design for easy attachment.
6. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the power adapter to the machine and then plug it into a suitable power outlet (100-240V AC, 50/60Hz).
7. ການເຊື່ອມຕໍ່ຂໍ້ມູນ: For computer control, connect the machine to your computer using the provided USB data cable. Alternatively, you can use a TF card for offline operation.

Figure 4.1: Assembled ATOMSTACK P9 M50 Laser Engraver.

Figure 4.2: Independent Control Terminal connection.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການຕິດຕັ້ງຊອບແວ ແລະ ການເຊື່ອມຕໍ່

The ATOMSTACK P9 M50 is compatible with popular laser engraving software:

• LaserGRBL: Supports Win XP/Win 7/Win 8/XP/Win 10.
• ແສງໄຟ: Supports Win XP/Win 7/Win 8/XP/Win 10 and Mac systems.

Download and install your preferred software from the official websites. Connect the engraver to your computer via USB. Follow the software's instructions to establish a connection and begin your projects.

Figure 5.1: Software Compatibility and Connection.

5.2 Offline Engraving

The P9 M50 supports offline engraving via its independent control terminal and TF card, allowing operation without a continuous computer connection.

1. Prepare your engraving file (NC, BMP, JPG, PNG, DXF) using your chosen software.
2. ບັນທຶກ file to a TF card.
3. Insert the TF card into the slot on the control terminal.
4. Use the terminal's interface to select and start your engraving project.

Figure 5.2: Independent Control Terminal for Offline Engraving.

5.3 Fixed Focus Laser

The P9 M50 features a fixed-focus laser, eliminating the need for manual focus adjustment. This design ensures consistent precision and high energy density for both engraving and cutting tasks.

Figure 5.3: Fixed Focus Laser Technology.

5.4 ວັດສະດຸທີ່ຮອງຮັບ

The ATOMSTACK P9 M50 can engrave and cut a wide range of materials:

Figure 5.4: Dual Compression Spot Coupling Technology for Cutting.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and extends the lifespan of your ATOMSTACK P9 M50. Perform these tasks periodically:

• ທຳຄວາມສະອາດເລນເລເຊີ: Periodically clean the laser lens with a soft, lint-free cloth and a specialized lens cleaning solution to maintain engraving precision and laser power.
• Clean the Work Area: Remove debris, dust, and residue from the engraving area after each use to prevent interference with the laser path and machine movement.
• ຊິ້ນສ່ວນເຄື່ອນທີ່ຂອງເຄື່ອງຫຼໍ່ລື່ນ: Apply a small amount of appropriate lubricant to the guide rails and lead screws as needed to ensure smooth and precise operation of the machine's axes.
• ກວດ​ສອບ​ສາຍ​: Regularly check all power and data cables for signs of wear, fraying, or damage. Replace any damaged cables immediately to prevent electrical hazards.

7. ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your ATOMSTACK P9 M50.

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the ATOMSTACK P9 M50 Laser Engraver:

ຮູບທີ 8.1: ຂະໜາດຂອງຜະລິດຕະພັນ ແລະຂໍ້ສະເພາະຫຼັກ.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official ATOMSTACK webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຂາຍຍ່ອຍຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

ຊັບພະຍາກອນອອນໄລນ໌:

• Visit the official ATOMSTACK store on Amazon: ຮ້ານຄ້າຢ່າງເປັນທາງການຂອງ ATOMSTACK
• For software support, visit the official webສະຖານທີ່ຂອງ LaserGRBL ແລະ ແສງໄຟ.