Ashly EcoTour™ 500.2 Professional Touring Power Ampຄູ່ມືຜູ້ໃຊ້ທີ່ມີຊີວິດຊີວາ

1. ບົດແນະນຳ

The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 ampມີຊີວິດຊີວາ.

2. ຂໍ້ມູນຄວາມປອດໄພ

ກະລຸນາອ່ານ ແລະ ເຂົ້າໃຈຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດກ່ອນທີ່ຈະໃຊ້ງານອຸປະກອນນີ້. ເກັບຄູ່ມືນີ້ໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.

WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
ຂໍ້ຄວນລະວັງ: ເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຂອງໄຟໄຫມ້ຫຼືໄຟຟ້າຊ໊ອກ, ຢ່າເຮັດໃຫ້ອຸປະກອນນີ້ຖືກຝົນຫຼືຄວາມຊຸ່ມຊື່ນ.
ອຸປະກອນນີ້ປະຕິບັດຕາມພາກທີ 15 ຂອງກົດລະບຽບ FCC. ການດໍາເນີນງານແມ່ນຂຶ້ນກັບສອງເງື່ອນໄຂຕໍ່ໄປນີ້: (1) ອຸປະກອນນີ້ອາດຈະບໍ່ເຮັດໃຫ້ເກີດການລົບກວນທີ່ເປັນອັນຕະລາຍ, ແລະ (2) ອຸປະກອນນີ້ຕ້ອງຍອມຮັບການແຊກແຊງໃດໆທີ່ໄດ້ຮັບ, ລວມທັງການລົບກວນທີ່ອາດຈະເຮັດໃຫ້ເກີດການເຮັດວຽກທີ່ບໍ່ຕ້ອງການ.
ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
Always disconnect the power cord before performing any maintenance or making connections.

3. ຜະລິດຕະພັນເກີນview

The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.

3.1 ຄຸນສົມບັດແຜງໜ້າ

Front panel of the Ashly EcoTour 500.2 ampມີຊີວິດຊີວາ

ຮູບທີ 1: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.

ສັບປ່ຽນພະລັງງານ: Located on the left side of the front panel, used to turn the ampLifier ເປີດ/ປິດ.
Channel Gain Controls: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
ຕົວຊີ້ວັດ LED: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.

3.2 ຄຸນນະສົມບັດຂອງແຜງດ້ານຫລັງ

Rear panel of the Ashly EcoTour 500.2 ampມີຊີວິດຊີວາ

ຮູບທີ 2: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.

Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
DIP Switch Settings: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
AC Input: Standard IEC power inlet for the detachable AC power cord.
ສະບັບtage ໂຕເລືອກ: A switch to select between 115V and 230V operation for international use.
ພັດລົມເຢັນ: Two cooling fans provide front-to-rear airflow for thermal management.

4. ຕັ້ງຄ່າ

Follow these steps to properly set up your Ashly EcoTour™ 500.2 ampມີຊີວິດຊີວາ.

ການຫຸ້ມຫໍ່: ລະມັດລະວັງເອົາ amplifier from its packaging. Inspect for any signs of damage.
ການຕິດຕັ້ງ Rack: ໄດ້ amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
ສະບັບtage ການຄັດເລືອກ: ກ່ອນເຊື່ອມຕໍ່ກັບແຫຼ່ງຈ່າຍໄຟ, ໃຫ້ກວດສອບລະດັບສຽງກ່ອນtage selector switch on the rear panel is set to the vol ທີ່ຖືກຕ້ອງtage ສໍາລັບພາກພື້ນຂອງທ່ານ (115V ຫຼື 230V). ບໍ່ຖືກຕ້ອງ voltage selection can damage the unit.
ການເຊື່ອມຕໍ່ຂາເຂົ້າ: ເຊື່ອມຕໍ່ແຫຼ່ງສຽງຂອງທ່ານ (ເຄື່ອງປະສົມສຽງ, ເຄື່ອງປະສົມສຽງກ່ອນ)amplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
ຮູບທີ 3: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.
ການເຊື່ອມຕໍ່ຜົນໄດ້ຮັບ: Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
ຮູບທີ 4: Detail of SpeakON connector wiring on the rear panel.

DIP Switch Configuration: Adjust the DIP switches on the rear panel according to your system requirements.

ຕາຕະລາງ 1: DIP Switch Settings
ການຕັ້ງຄ່າ	ເປີດຕຳແໜ່ງ	ປິດຕຳແໜ່ງ
ປິດໃຊ້ງານແຜງໜ້າ	ເປີດໃຊ້ແລ້ວ	ຄົນພິການ
HPF (High-Pass Filter)	ເປີດໃຊ້ແລ້ວ	ຄົນພິການ
ຈຳກັດ	ເປີດໃຊ້ແລ້ວ	ຄົນພິການ
ໄດ້ຮັບ	26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations)	Default/Other Gain Setting

Refer to the detailed diagram on the rear panel for specific gain switch combinations.

ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

ເມື່ອ amplifier is properly set up, follow these steps for operation.

ເປີດ: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amplifier. The power indicator LED will illuminate.
ປັບການໄດ້ຮັບ: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
ຈໍ LEDs:
- SIG LED: Illuminates when an audio signal is present on the channel.
- LIMIT LED: illuminates ໃນເວລາທີ່ amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
ປິດພະລັງງານ: Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the ampມີຊີວິດຊີວາ.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງເຈົ້າ ampມີຊີວິດຊີວາ.

ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າແຫ້ງທີ່ອ່ອນໆເພື່ອເຮັດຄວາມສະອາດພາຍນອກ ampຕົວຊີ້ບອກ. ຢ່າໃຊ້ນໍ້າສະອາດ ຫຼືສານລະລາຍ.
ການລະບາຍອາກາດ: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
ການເຊື່ອມຕໍ່ສາຍ: Periodically check all input and output cable connections for secure fit and signs of wear.
ການເກັບຮັກສາ: ຖ້າຫາກວ່າການເກັບຮັກສາ amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.

7. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບກັບທ່ານ ampມີຊີວິດຊີວາ.

ຕາຕະລາງ 2: ຄູ່ມືການແກ້ໄຂບັນຫາ
ບັນຫາ	ສາເຫດທີ່ເປັນໄປໄດ້	ການແກ້ໄຂ
ບໍ່ມີພະລັງງານ	Power cord disconnected, outlet fault, voltagຕົວເລືອກ e ບໍ່ຖືກຕ້ອງ.	Check power cord connection, try a different outlet, verify voltage selector setting.
ບໍ່ມີສຽງອອກ	Input/output cables disconnected, gain set to minimum, source device off, speaker fault.	Check all cable connections, increase gain, ensure audio source is active, test speakers.
Distorted sound / LIMIT LED constantly on	ສັນຍານເຂົ້າສູງເກີນໄປ, amplifier overloaded, speaker impedance mismatch.	Reduce input signal level, lower channel gain, ensure speaker impedance matches amplifier's rating.
ຮ້ອນເກີນໄປ	ການລະບາຍອາກາດຖືກອຸດຕັນ, ການໂຫຼດຫຼາຍເກີນໄປ.	Ensure clear airflow around the unit, reduce load, check fan operation.

8. ຂໍ້ມູນຈໍາເພາະ

ຕົວແບບ: ECOTOUR500.2-120V-U
ພະລັງງານອອກ: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
ຊ່ອງ: 2
ຕົວເຊື່ອມຕໍ່ເຂົ້າ: XLR, 1/4-inch (TRS/TS)
Output Connectors: ເວົ້າON
ສະບັບtage: 100-240VAC, 50/60Hz (selectable)
ຂະໜາດ: 16 x 19 x 3.5 ນິ້ວ (40.64 x 48.26 x 8.89 cm)
ນ້ໍາຫນັກລາຍການ: 18.5 ປອນ (8.39 ກິໂລ)
ຄຸນສົມບັດ: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please contact Ashly customer service or visit the official Ashly webເວັບໄຊ.

Ashly Store: Visit the Ashly Store on Amazon

10. Related Videos (Not Applicable)

No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.

Ashly ECOTOUR500.2-120V-U