Globo Lighting BOSTON Outdoor Pedestal Light

1. ບົດແນະນຳ

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• ຄວາມປອດໄພທາງໄຟຟ້າ: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
• ການນໍາໃຊ້ກາງແຈ້ງ: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• ປະເພດດອກໄຟ: Use only E27 bulbs with the specified wattage. ບໍ່ເກີນ watt ສູງສຸດtage ຊີ້ບອກຢູ່ໃນ fixture ໄດ້.
• ການຈັດການ: ຈັດການອຸປະກອນດ້ວຍຄວາມລະມັດລະວັງ. ຫຼີກລ່ຽງການຕົກ ຫຼື ກະທົບຢ່າງແຮງ.
• ທໍາຄວາມສະອາດ: Do not use abrasive cleaners or solvents. Clean with a soft, damp ຜ້າ.
• ຄວາມຮ້ອນ: ປ່ອຍໃຫ້ຫລອດໄຟເຢັນຫມົດກ່ອນທີ່ຈະພະຍາຍາມປ່ຽນມັນ.

3. ເນື້ອໃນຊຸດ

Please check that all components are present and undamaged before beginning installation:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x ຖານການຕິດຕັ້ງ
• 1x Set of Mounting Hardware (screws, anchors)
• 1x ຄູ່ມືຜູ້ໃຊ້

Note: E27 bulb is not typically included and must be purchased separately.

4. ຂໍ້ມູນຈໍາເພາະ

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ສຳຄັນ: ໃຫ້ແນ່ໃຈວ່າແຫຼ່ງຈ່າຍໄຟຫຼັກຖືກປິດຢູ່ທີ່ເບຣກເກີກ່ອນທີ່ຈະເລີ່ມຕິດຕັ້ງ.

1. ເລືອກສະຖານທີ່: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. ກະກຽມສາຍໄຟ: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. ພູຖານ: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. ເຊື່ອມຕໍ່ສາຍໄຟຟ້າ: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. ຕິດຕັ້ງ Bulb: Insert a suitable E27 bulb (not included) into the lamp ຜູ້ຖື. ບໍ່ overtight.
6. Secure Fixture: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. ຟື້ນຟູພະລັງງານ: ເມື່ອການຕິດຕັ້ງສໍາເລັດແລະການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພ, ຟື້ນຟູພະລັງງານຢູ່ທີ່ຕົວຕັດວົງຈອນຕົ້ນຕໍ.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• ເປີດ: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• ເຊັນເຊີກວດຈັບການເຄື່ອນໄຫວ: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• ປິດອັດຕະໂນມັດ: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• ເຊັນເຊີກາງເວັນ/ກາງຄືນ: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດເຄື່ອງສ້ອມແຊມເປັນປະຈໍາດ້ວຍເຄື່ອງອ່ອນ, ງamp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• ການທົດແທນດອກໄຟ:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. ປ່ອຍໃຫ້ຫລອດໄຟເກົ່າເຢັນຫມົດກ່ອນທີ່ຈະແຕະມັນ.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. ຟື້ນຟູພະລັງງານ.
• ການກວດກາ: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. ການແກ້ໄຂບັນຫາ

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

ໂດຍທົ່ວໄປແລ້ວຂໍ້ມູນການຕິດຕໍ່ສາມາດພົບໄດ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຫຼືເຈົ້າຫນ້າທີ່ຂອງຜູ້ຜະລິດ webເວັບໄຊ.