ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DB330M Micro-ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage. The DB330M case features a 270° panoramic tempered glass panel, pre-installed PWM ARGB fans, and a high-speed I/O panel.
ຂໍ້ມູນຄວາມປອດໄພ
- Always disconnect the power supply from the wall outlet before installing or servicing any components inside the PC case.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or sharp objects.
- Wear anti-static gloves or use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive components.
- ເກັບຮັກສາຊິ້ນສ່ວນຂະໜາດນ້ອຍ ແລະ ສະກູໃຫ້ໄກຈາກເດັກນ້ອຍ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເໝາະສົມອ້ອມຮອບເຄສຄອມພິວເຕີເພື່ອປ້ອງກັນການຮ້ອນເກີນໄປ.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- darkFlash DB330M Micro-ATX PC Case
- 3 x Pre-installed PWM ARGB Fans
- Accessory Box (screws, cable ties, etc.)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຄຸນນະສົມບັດຫຼາຍກວ່າview
- ແກ້ວປັບອາກາດແບບພາໂນຣາມາ 270°: ສະຫນອງການຂະຫຍາຍຕົວ view ຂອງອົງປະກອບພາຍໃນແລະໄຟ RGB.
- High-Speed I/O Panel: Includes USB 3.0 and Type-C ports for fast data transfer.
- Vertical Airflow Cooling: Optimized design with pre-installed fans for efficient heat dissipation.
- Magnetic Dust Filters: Located on top and bottom to keep components clean.
- ການຕິດຕັ້ງງ່າຍດາຍ: User-friendly design for hassle-free assembly and maintenance.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຊື່ຕົວແບບ | DB330M PC CASE |
| ຂະໜາດ (LxWxH) | 8.58"D x 13.11"W x 15.75"H (218mm x 333mm x 400mm) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງເມນບອດ | ໄມໂຄຣ ATX, ITX |
| ປະເພດກໍລະນີ | ຫໍ Midi |
| ວັດສະດຸ | ພາດສະຕິກ, ແກ້ວອຸນຫະພູມສູງ |
| ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ | ພັດລົມ ARGB PWM 3 x 120 ມມ |
| ຄວາມສູງຂອງ CPU Cooler ສູງສຸດ | 180ມມ |
| ການລ້າງ GPU ສູງສຸດ | 305ມມ |
| ຮອງຮັບລັງສີ (ເທິງສຸດ) | ເຖິງ 240 ມມ |
| ປະເພດການຕິດຕັ້ງການສະຫນອງພະລັງງານ | Bottom Mount (Max 140mm PSU length) |
| ຜອດ I/O | 1 x USB 3.0, 1 x Type-C, Audio In/Out |
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
1. Accessing the Interior (Quick Release Design)
The darkFlash DB330M features a quick-release design for easy access to internal components. The tempered glass panels can be removed by gently pulling them away from the chassis. The top panel also detaches for fan/radiator installation.
2. ການຕິດຕັ້ງເມນບອດ
Install your Micro-ATX or ITX motherboard into the designated area. Ensure standoffs are correctly aligned and secured. The case supports CPU coolers up to 180mm in height and GPUs up to 305mm in length.
3. ການຕິດຕັ້ງພັດລົມ ແລະ ລະບົບເຮັດຄວາມເຢັນ
The case comes with three pre-installed 120mm PWM ARGB fans. Two fans are located at the top, and one at the rear. Additional fan mounts are available at the bottom (up to 2 x 120mm) for enhanced airflow. The case supports a 240mm AIO radiator on the top panel.
The pre-installed fans are PWM ARGB type, offering speed adjustment and rich lighting modes with motherboard synchronization. Note: An RGB hub controller is not included.
4. Power Supply and Storage Installation
Install your power supply unit (PSU) in the bottom mount. The case supports PSUs up to 140mm in length. Utilize the standard hard drive cage for storage devices.
5. Connecting Front I/O Panel
Connect the front I/O panel cables to your motherboard. The panel includes a Type-C port, USB 3.0 port, and USB 2.0 port for various connectivity needs.
6. ການຄຸ້ມຄອງສາຍໄຟ
Utilize the cable routing options and tie-downs behind the motherboard tray to ensure clean cable management. This improves airflow and aesthetics.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດເຄື່ອງ
After all components are securely installed and connected, plug in the power cable to your PSU and press the power button on the front I/O panel to start your system.
2. ການຄວບຄຸມພັດລົມ ARGB
The pre-installed ARGB fans can be controlled via compatible motherboard software (if connected to an ARGB header) to customize lighting effects and fan speeds. Refer to your motherboard manual for specific software instructions.
3. Airflow Configuration
The DB330M is designed with optimized airflow channels. The pre-installed fans facilitate vertical airflow, with the fan above the PSU directing air towards the graphics card. Ensure no obstructions block the airflow paths.
ບໍາລຸງຮັກສາ
1. ການເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນ
Regularly clean the magnetic dust filters located on the top and bottom of the case. Gently remove the filters and clean them with compressed air or a soft brush. Reattach them securely after cleaning.
2. ທໍາຄວາມສະອາດທົ່ວໄປ
Use a soft, dry cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners or solvents.
ການແກ້ໄຂບັນຫາ
- PC ບໍ່ເປີດ:
- Ensure the power supply is properly connected to the wall and the PSU switch is in the 'ON' position.
- Verify all power cables from the PSU are securely connected to the motherboard and components.
- ກວດສອບການເຊື່ອມຕໍ່ສະວິດໄຟຂອງແຜງດ້ານໜ້າກັບເມນບອດ.
- ພັດລົມບໍ່ໝຸນ/RGB ບໍ່ເຮັດວຽກ:
- ຢືນຢັນວ່າສາຍໄຟພັດລົມໄດ້ເຊື່ອມຕໍ່ກັບແຜງວົງຈອນຫຼັກ ຫຼື ຕົວຄວບຄຸມພັດລົມແລ້ວ.
- ໃຫ້ແນ່ໃຈວ່າສາຍ ARGB ໄດ້ເຊື່ອມຕໍ່ກັບຫົວຕໍ່ ARGB ທີ່ເຂົ້າກັນໄດ້ຢູ່ເທິງເມນບອດ ຫຼື ຕົວຄວບຄຸມ ARGB.
- ກວດເບິ່ງການຕັ້ງຄ່າຊອບແວເມນບອດສໍາລັບຄວາມໄວພັດລົມ ແລະການຄວບຄຸມ RGB.
- ພອດ USB ບໍ່ເຮັດວຽກ:
- Verify the front panel USB 3.0 and Type-C cables are correctly plugged into the corresponding headers on your motherboard.
- ໃຫ້ແນ່ໃຈວ່າໄດຣເວີຂອງເມນບອດເປັນລຸ້ນລ້າສຸດ.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
darkFlash provides a ຮັບປະກັນ 1 ປີ for this computer case. For technical support, warranty claims, or further assistance, please contact darkFlash customer service through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້. ກະລຸນາເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອກວດສອບການຮັບປະກັນ.
Official darkFlash Webເວັບໄຊ: www.darkflash.com
