WORKPRO 7.2V Electric Pruning Shears Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the WORKPRO 7.2V Electric Pruning Shears. This manual provides essential information for the safe operation, maintenance, and care of your new tool. Please read it thoroughly before first use and retain it for future reference.

ຮູບພາບ 1.1: ຫຼາຍກວ່າview of the WORKPRO 7.2V Electric Pruning Shears and its USB-C charging cable.

2. ຂໍ້ມູນຄວາມປອດໄພ

ໃຫ້ຄວາມສຳຄັນກັບຄວາມປອດໄພສະເໝີເມື່ອໃຊ້ເຄື່ອງມືໄຟຟ້າ. ການບໍ່ປະຕິບັດຕາມຄຳແນະນຳເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ແລະ/ຫຼື ການບາດເຈັບສາຫັດ.

ຄຳເຕືອນຄວາມປອດໄພທົ່ວໄປ:

• ອ່ານຄຳແນະນຳທັງໝົດ: ຄຸ້ນເຄີຍກັບລັກສະນະການດຳເນີນງານ ແລະ ຄວາມປອດໄພຂອງເຄື່ອງມື.
• ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ຊັດເຈນ: ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ.
• ຫຼີກລ້ຽງສະພາບແວດລ້ອມອັນຕະລາຍ: ຢ່າໃຊ້ເຄື່ອງມືໄຟຟ້າໃນ damp ຫຼືສະຖານທີ່ຊຸ່ມ, ຫຼືເຮັດໃຫ້ພວກເຂົາຝົນ.
• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເໝາະສົມ (PPE): Always wear safety glasses, gloves, and sturdy footwear.
• ແຈ້ງເຕືອນຢູ່ສະເໝີ: Pay attention to what you are doing and use common sense. Do not operate the tool when tired or under the influence of drugs, alcohol, or medication.
• ຮັບ​ປະ​ກັນ Workpiece ໄດ້​: ໃຊ້ clamps ຫຼືວິທີການປະຕິບັດອື່ນໆເພື່ອຮັບປະກັນ workpiece ກັບເວທີທີ່ຫມັ້ນຄົງ.
• ບໍ່ເກີນ: ຮັກສາຄວາມດຸ່ນດ່ຽງແລະຕີນທີ່ຖືກຕ້ອງຕະຫຼອດເວລາ.
• ເກັບຮັກສາເຄື່ອງມື Idle: ເມື່ອບໍ່ໄດ້ໃຊ້, ເຄື່ອງມືຄວນເກັບຮັກສາໄວ້ໃນບ່ອນແຫ້ງ, ສູງ, ຫຼືບ່ອນລັອກ, ຫ່າງຈາກເດັກນ້ອຍ.
• ຮັກສາເຄື່ອງມືດ້ວຍຄວາມລະມັດລະວັງ: ຮັກສາເຄື່ອງມືຕັດໃຫ້ຄົມຊັດ ແລະສະອາດເພື່ອປະສິດທິພາບທີ່ດີກວ່າ ແລະປອດໄພກວ່າ. ປະຕິບັດຕາມຄໍາແນະນໍາສໍາລັບການຫລໍ່ລື່ນແລະການປ່ຽນອຸປະກອນເສີມ.
• ກວດ​ສອບ​ສໍາ​ລັບ​ພາກ​ສ່ວນ​ທີ່​ເສຍ​ຫາຍ​: Before further use, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function.

Specific Pruner Safety:

• Blade Hazard: The blades are extremely sharp. Keep fingers and body parts away from the blades during operation.
• ການເຮັດວຽກສະຫຼັບຄູ່: This tool features a dual-action switch for safety. Both the main trigger and the safety switch must be pressed simultaneously to operate the blades. Keep the switch pressed throughout the cutting operation.
• ຖອດປລັກເມື່ອບໍ່ໄດ້ໃຊ້: Always disconnect the charging cable when the tool is not in use, before servicing, or when changing accessories.
• ຄວາມປອດໄພຫມໍ້ໄຟ: Use only the specified charging method. Do not incinerate the battery or expose it to high temperatures.

3. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ

The WORKPRO 7.2V Electric Pruning Shears are designed for efficient and effortless pruning tasks. Key features include:

• High-Quality SK5 Blades: Durable and sharp for clean cuts.
• ມໍເຕີປະສິດທິພາບ: Provides powerful performance with reduced noise.
• ໄຟ LED ໃນຕົວ: Illuminates the cutting area for improved visibility in low light.
• ການອອກແບບນ້ຳໜັກເບົາ: Weighs approximately 1.9 pounds (0.86 kg) for comfortable, extended use.
• ສະວິດຄວາມປອດໄພຄູ່: ປ້ອງກັນການເປີດໃຊ້ງານໂດຍບັງເອີນ.
• ຄວາມອາດສາມາດຕັດສູງສຸດ: 20mm (0.8 inches) for fresh branches.

ຮູບພາບ 3.1: ລາຍລະອຽດ view highlighting the maximum cutting capacity, special gear system, constant light, and safety protection features.

Image 3.2: Close-up of the SK5 blade, designed for smooth cuts without damaging bark.

Image 3.3: Illustration of the internal powerful motor, indicating high efficiency and strong load capacity.

4. ຕັ້ງຄ່າ

ກຳລັງສາກແບັດເຕີຣີ:

1. ໃຫ້ແນ່ໃຈວ່າມີດຕັດแต่งກິ່ງຖືກປິດແລ້ວ.
2. Locate the Type-C charging port on the tool.
3. Connect the provided USB-C charging cable to the port on the shears and plug the other end into a compatible USB power adapter (not included) or a USB port.
4. ໄຟຕົວຊີ້ວັດການສາກໄຟຈະສະແດງສະຖານະຂອງການສາກໄຟ. ໂດຍປົກກະຕິການສາກເຕັມຈະໃຊ້ເວລາ 4-5 ຊົ່ວໂມງ.
5. ເມື່ອສາກເຕັມແລ້ວ, ໃຫ້ຖອດສາຍສາກອອກ.

The tool is equipped with two 3.6V, 2000mAh Lithium-Ion batteries.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Activating the Shears:

1. ໃຫ້ແນ່ໃຈວ່າໄດ້ສາກໄຟແລ້ວ.
2. To activate the shears, first press the main trigger, then simultaneously press the safety switch located on the handle.
3. Keep both switches depressed throughout the cutting operation. Releasing either switch will cause the blades to open immediately and the tool to stop.

Image 5.1: Proper hand placement for operating the dual safety switch, ensuring safe activation.

ຂັ້ນຕອນການຕັດ:

1. ວາງກິ່ງງ່າທີ່ຈະຕັດລະຫວ່າງໃບມີດທີ່ເປີດຢູ່.
2. Ensure the branch diameter does not exceed 20mm (0.8 inches) for fresh branches. Attempting to cut thicker branches may damage the tool or result in an incomplete cut.
3. Activate the shears as described above. The blades will close to make the cut.
4. Release the switches to allow the blades to open for the next cut.
5. For slightly thicker branches within the tool's capacity, multiple 'bites' can be taken to gradually cut through.

Image 5.2: Visual representation of the 20mm (0.8 inch) maximum cutting diameter for effective pruning.

ແອັບພລິເຄຊັນ:

These electric pruning shears are suitable for a variety of gardening tasks, including:

• Pruning trees and shrubs
• Pruning fruit trees
• Pruning grapevines
• Pruning flowers and ornamental plants
• General garden and landscape maintenance
• Harvesting fruit

ຮູບພາບ 5.3: ຕົວຢ່າງamples of multiple uses for the electric pruning shears in different gardening scenarios.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your pruning shears.

• ການເຮັດຄວາມສະອາດແຜ່ນ: After each use, wipe the blades clean with a damp cloth to remove sap, dirt, and debris. For stubborn residue, use a mild cleaning solution. Ensure blades are dry before storage.
• ການຫລໍ່ລື່ນໃບ: Periodically apply a light coat of machine oil or specialized blade lubricant to the cutting blades to prevent rust and ensure smooth operation.
• ການເກັບຮັກສາ: Store the pruning shears in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the safety switch is engaged and the blades are closed.
• ການດູແລຫມໍ້ໄຟ: Do not store the tool with a completely discharged battery. Recharge the battery periodically if the tool is not used for extended periods.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your WORKPRO Electric Pruning Shears, refer to the following common troubleshooting steps:

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

WORKPRO is committed to providing a positive customer experience. If you have any questions, concerns, or require assistance with your WORKPRO tools, please contact our customer support. Refer to your purchase documentation for specific warranty details and contact information.

For further assistance, please visit the official WORKPRO webເວັບໄຊທ໌ ຫຼື ຕິດຕໍ່ຜູ້ຂາຍໂດຍກົງ.