BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

ແນະນຳ

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ຄຳເຕືອນ: ຄວາມສ່ຽງຈາກໄຟຟ້າຊັອດ.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງຫມົດແມ່ນປອດໄພແລະຖືກ insulated ຢ່າງຖືກຕ້ອງ.
• ບໍ່ໃຫ້ເກີນລະດັບໄຟຟ້າສູງສຸດຂອງອຸປະກອນ.
• ການດໍາເນີນງານ Voltage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

ການຕິດຕັ້ງ & ການຕິດຕັ້ງ

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

ເນື້ອໃນຊຸດ:

• BN-LINK Countdown Timer Switch
• ແຜ່ນຕິດຝາ
• screws ການຕິດຕັ້ງ
• ເສັ້ນລວດ

ເຄື່ອງມືທີ່ຕ້ອງການ (ບໍ່ລວມ):

• Screwdriver (Phillips ແລະ Flathead)
• ເສັ້ນລວດ
• ເທບໄຟຟ້າ
• ສະບັບtage ເຄື່ອງທົດສອບ

ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​:

1. ປິດໄຟ: ຊອກຫາຕົວຕັດວົງຈອນຄວບຄຸມສະວິດທີ່ທ່ານກໍາລັງປ່ຽນແລະປິດມັນ. ກວດ​ສອບ​ວ່າ​ພະ​ລັງ​ງານ​ປິດ​ການ​ນໍາ​ໃຊ້ voltage ເຄື່ອງທົດສອບ.
2. ເອົາປຸ່ມເກົ່າອອກ: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. ກໍານົດສາຍ: Identify the following wires in your wall box:
   • ສາຍຮ້ອນ (ສາຍ): ໂດຍປົກກະຕິແລ້ວແມ່ນສີດຳ, ນຳເອົາພະລັງງານຈາກເບຣກເກີ.
   • ໂຫຼດສາຍ: Typically black, sends power to the light/fan.
   • ສາຍກາງ: Typically white. A neutral wire is REQUIRED for this switch.
   • ສາຍດິນ: ໂດຍປົກກະຕິແລ້ວແມ່ນທອງແດງສີຂຽວ ຫຼື ທອງແດງເປົ່າ.
4. Wire the New Switch: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • ເຊື່ອມ​ຕໍ່ ລວດ ດຳ from the timer switch to the Hot Wire (Line) ຈາກກ່ອງຝາຜະໜັງ.
   • ເຊື່ອມ​ຕໍ່ ສາຍໄຟແດງ from the timer switch to the ໂຫຼດສາຍ ຈາກກ່ອງຝາຜະໜັງ.
   • ເຊື່ອມ​ຕໍ່ ລວດສີຂາວ from the timer switch to the ສາຍກາງ ຈາກກ່ອງຝາຜະໜັງ.
   • ເຊື່ອມ​ຕໍ່ ລວດສີຂຽວ from the timer switch to the ລວດລາຍດິນ ຈາກກ່ອງຝາຜະໜັງ.
5. ຮັກສາສະວິດໃຫ້ປອດໄພ: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. ຕິດຕັ້ງແຜ່ນຕິດຝາ: Attach the provided wall plate over the switch.
7. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ.
8. ການ​ປະ​ຕິ​ບັດ​ການ​ທົດ​ສອບ​: Test the timer switch to ensure it functions correctly.

ຮູບພາບ: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

ຄໍາແນະນໍາການດໍາເນີນງານ

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

ຮູບພາບ: ດ້ານໜ້າ view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

ຟັງຊັນປຸ່ມ:

• ປຸ່ມເປີດປິດ (ດ້ານເທິງ): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Exampການ​ນໍາ​ໃຊ້​:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

ຄໍາຮ້ອງສະຫມັກອະເນກປະສົງ

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

ຮູບພາບ: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• ຫ້ອງນ້ຳ: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• garages: Manage lighting or ventilation systems.
• ຫ້ອງຊັກລີດ: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

ບໍາລຸງຮັກສາ

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• ທໍາຄວາມສະອາດ: To clean the surface of the switch, gently wipe with a soft, damp ຜ້າ. ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ຕົວລະລາຍ, ຫຼື ສານເຄມີຮຸນແຮງ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ອາດຈະທໍາລາຍຊັ້ນເຄືອບ ຫຼື ອົງປະກອບພາຍໃນໄດ້.
• ການກວດກາ: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit yourself.

ການແກ້ໄຂບັນຫາ

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

ການຮັບປະກັນ & ສະຫນັບສະຫນູນ

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

ຂໍ້ມູນຕິດຕໍ່:

• Refer to the BN-LINK official webສະຖານທີ່ຫຼືການຫຸ້ມຫໍ່ຜະລິດຕະພັນສໍາລັບລາຍລະອຽດການຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.
• Online support may be available through the BN-LINK brand store on Amazon or their official webເວັບໄຊ.