CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser User Manual

ແນະນຳ

Thank you for choosing the CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser. This advanced system provides convenient access to purified cold and ambient water. Featuring a GAC filtration system, UV LED self-cleaning, and touchless dispense technology, it ensures a hygienic and refreshing hydration experience. This manual provides essential information for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your dispenser.

ຮູບ 1: ດ້ານຫນ້າ view of the CLOVER D25-B-TL Water Cooler Dispenser.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ກະລຸນາອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະໃຊ້ເຄື່ອງໃຊ້. ຮັກສາຄູ່ມືນີ້ໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.

• ຄວາມປອດໄພທາງໄຟຟ້າ: Ensure the dispenser is connected to a grounded electrical outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• ການເຊື່ອມຕໍ່ນ້ໍາ: Connect the dispenser only to a potable water supply. Ensure all connections are secure to prevent leaks.
• ການຈັດວາງ: Place the dispenser on a flat, stable surface. Allow adequate clearance around the unit for ventilation.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: Keep children and pets away from the dispenser, especially during operation and maintenance.
• ອຸນຫະພູມ: This unit dispenses cold and ambient water only. It does NOT produce hot water.
• ຄວາມເສຍຫາຍ: Do not operate the dispenser if it has a damaged cord or plug, or if it has been dropped or damaged in any way. Contact customer support.

ເນື້ອໃນຊຸດ

Verify that all items listed below are included in your package.

• CLOVER D25-B-TL Water Cooler Dispenser
• First Filter (GAC Purification System)
• ທໍ່ນ້ຳ
• ຕົວເຊື່ອມຕໍ່
• Emergency Shutoff Valve
• Tubing Clips
• ຄູ່ມືຜູ້ໃຊ້

Figure 2: Included installation kit components.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. ການຫຸ້ມຫໍ່: Carefully remove the dispenser and all components from the packaging. Retain packaging for future transport if needed.
2. ການຈັດວາງ: Position the freestanding dispenser on a level, stable surface. Ensure there is adequate space around the unit for proper ventilation, especially at the rear where the cooling coils are located. The dimensions are approximately 13.58"D x 12.2"W x 43.3"H.
3. ການຕິດຕັ້ງຕົວກອງ:
   • Locate the filter housing, typically at the rear or bottom access panel of the unit.
   • Insert the provided GAC purification filter into the housing as per the arrows indicating water flow.
   • Secure the filter firmly.
   

   ຮູບທີ 3: ພາຍໃນ view illustrating filter placement and water tubing.
4. ການເຊື່ອມຕໍ່ການສະຫນອງນ້ໍາ:
   • Connect the water tubing from your potable water source to the dispenser's inlet using the provided connectors and emergency shutoff valve.
   • Ensure all connections are tight to prevent leaks. Use tubing clips to secure the tubing if necessary.
   • Slowly open the water supply valve to allow water to fill the dispenser's internal tank. Check for any leaks.
5. ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບເຄື່ອງແຈກຈ່າຍເຂົ້າກັບປລັກໄຟຟ້າ AC 120V ທີ່ມີສາຍດິນ.
6. ການລ້າງເບື້ອງຕົ້ນ: Before first use, dispense several cups of water from both cold and ambient spouts to flush the system and filter. Discard this water.

ຄໍາແນະນໍາການດໍາເນີນງານ

The CLOVER D25-B-TL features touchless dispense and UV LED self-cleaning for enhanced hygiene.

1. ເປີດ: Once plugged in, the dispenser will begin to cool the water. Allow approximately 1-2 hours for the water to reach optimal cold temperature (35.6°F).
2. Dispensing Water (Touchless):
   • Place your cup or container under the desired spout (cold or ambient).
   • Wave your hand in front of the sensor located above the spout. The water will begin to dispense.
   • Remove your hand to stop the water flow.
   

   Figure 4: Detail of the touchless dispense spouts and sensors.

3. UV LED Self-Cleaning: The dispenser is equipped with a UV LED self-cleaning system for enhanced water purification. This system operates automatically to maintain the hygiene of the internal water tanks. Refer to the indicator lights on the top panel for its status.

ບໍາລຸງຮັກສາ

Regular maintenance ensures the best performance and water quality from your dispenser.

1. ການທົດແທນການກັ່ນຕອງ:
   • The GAC purification filter should be replaced periodically, typically every 6 months or as indicated by the dispenser's filter change indicator (if present).
   • Turn off the water supply and unplug the dispenser before replacing the filter.
   • Follow the filter installation steps in the Setup section to replace the old filter with a new one.
   • Flush the new filter as described in the Initial Flush step.
2. ການເຮັດຄວາມສະອາດຖາດ Drip: The ABS drip tray is easily removed for cleaning.
   • Pull the drip tray forward to remove it.
   • Empty any collected water and wash the tray with mild soap and water.
   • Rinse thoroughly and reinsert the tray.
3. ການອະນາໄມພາຍນອກ: ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
4. Internal Tank Cleaning: The UV LED self-cleaning system helps maintain internal hygiene. For additional cleaning, consult the manufacturer's website or customer support for specific instructions.

ການແກ້ໄຂບັນຫາ

ກ່ອນ​ທີ່​ຈະ​ຕິດ​ຕໍ່​ຫາ​ສະ​ຫນັບ​ສະ​ຫນູນ​ລູກ​ຄ້າ​, ກະ​ລຸ​ນາ​ເບິ່ງ​ບັນ​ຫາ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແລະ​ການ​ແກ້​ໄຂ​:

ຂໍ້ມູນຈໍາເພາະ

ຮູບທີ 5: ຂະໜາດຜະລິດຕະພັນສຳລັບການອ້າງອີງຕຳແໜ່ງ.

ການຮັບປະກັນ ແລະການຊ່ວຍເຫຼືອລູກຄ້າ

For warranty information, product registration, or technical assistance, please contact CLOVER customer support.

ຜູ້ຜະລິດ: Clover
Webເວັບໄຊ: CLOVER Official Store (ສໍາ​ລັບ​ຂໍ້​ມູນ​ທົ່ວ​ໄປ​ຜະ​ລິດ​ຕະ​ພັນ​)
ກະລຸນາເບິ່ງເອກະສານການຊື້ຂອງທ່ານສໍາລັບເງື່ອນໄຂການຮັບປະກັນສະເພາະແລະລາຍລະອຽດການຕິດຕໍ່.