AOSHIDA Gustard H26 Discrete Class A Headphone Ampຄູ່ມືຜູ້ໃຊ້ທີ່ມີຊີວິດຊີວາ

1. ບົດແນະນຳ

The Gustard H26 is a high-performance discrete Class A headphone amplifier ແລະກ່ອນamplifier designed for audiophiles. It features a fully balanced circuit design, robust power delivery, and versatile input/output options for an exceptional audio experience. This manual provides detailed instructions for setting up, operating, and maintaining your H26 ampມີຊີວິດຊີວາ.

ຮູບທີ 1.1: ດ້ານໜ້າ view of the Gustard H26 headphone amplifier, showcasing its sleek black design with a central volume knob and headphone jacks.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• Fully Balanced Discrete Class A Ampມີຊີວິດຊີວາ: Utilizes 8 pairs of power transistors for sufficient drive and control, ensuring high-fidelity audio reproduction.
• Versatile Headphone Connectivity: Equipped with 6.35mm unbalanced, 4.4mm balanced, and 4-pin XLR balanced headphone outputs.
• Precision Volume Control: Features a matrix relay volume system, ensuring consistent 4-way volume adjustment without distortion or bias.
• Dual Toroidal Transformers: Incorporates two custom 50W audio-specific toroidal transformers, one for each channel, to prevent interference and provide stable power.
• High-Performance Preampມີຊີວິດຊີວາ: ກ່ອນampຊີວິດ stage uses two direct-inserted LME49720 dual op-amps for clear signal processing.
• ຮູບແບບຜົນຜະລິດທີ່ມີຄວາມຍືດຫຍຸ່ນ: ຫູຟັງ amplifier power can be switched off separately, allowing the H26 to function as a pure preamplifier output. Preamplifier outputs can also be deactivated for easy switching between headphone and speaker listening.

ຮູບທີ 2.1: ພາຍໃນ view of the Gustard H26, highlighting the eight pairs of power transistors used in its fully balanced discrete Class A ampການ​ອອກ​ແບບ lifier​.

ຮູບທີ 2.2: Close-up of the two 50W audio-specific custom toroidal transformers inside the Gustard H26, designed to prevent channel interference.

ຮູບທີ 2.3: ພາຍໃນ view illustrating the matrix relay volume control and the LME49720 dual op-amps used in the preampຊີວິດ stage of the Gustard H26.

3. ຕັ້ງຄ່າ

3.1 ການຫຸ້ມຫໍ່

Carefully remove the Gustard H26 from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future transport or storage.

3.2 ການເຊື່ອມຕໍ່ອຸປະກອນຂອງທ່ານ

Refer to the diagram below for a clear understanding of the rear panel connections. Ensure all connections are secure before powering on the device.

ຮູບທີ 3.1: Detailed diagram of the Gustard H26 rear panel, showing all input and output ports, power connections, and controls.

• ການເຊື່ອມຕໍ່ຂາເຂົ້າ:
  • RCA Input (x1): Connect your single-ended audio source (e.g., DAC, CD player) to the RCA input jacks (Right/Left).
  • XLR Input (x2): Connect your balanced audio sources to the XLR input jacks. The H26 provides two sets of balanced XLR inputs (XLR1 and XLR2).
• ກ່ອນamplifier Output Connections:
  • RCA ກ່ອນamplifier ຜົນ​ຜະ​ລິດ​: ເຊື່ອມຕໍ່ກັບພະລັງງານຂອງທ່ານ ampລຳໂພງ ຫຼື ລຳໂພງທີ່ໃຊ້ງານໄດ້ໂດຍໃຊ້ສາຍ RCA.
  • XLR ກ່ອນamplifier ຜົນ​ຜະ​ລິດ​: Connect to your balanced power amplifier or active speakers using XLR cables.
• ການເຊື່ອມຕໍ່ພະລັງງານ:
  • ການປ້ອນຂໍ້ມູນພະລັງງານ AC: Connect the provided power cable to the AC input.
  • ສະບັບtage ການຄັດເລືອກ: ຮັບປະກັນ voltagສະຫຼັບຕົວເລືອກ e ຖືກຕັ້ງເປັນ vol ທີ່ຖືກຕ້ອງtage for your region (100-120V or 220-240V). ບໍ່ຖືກຕ້ອງ voltage selection can damage the unit.
  • ສັບປ່ຽນພະລັງງານ: Use this to turn the unit on or off.
  • ຟິວ: The fuse holder is integrated into the AC input for protection.

3.3 ການເປີດເຄື່ອງເບື້ອງຕົ້ນ

After all connections are made and the voltage is correctly selected, press the power switch on the rear panel to turn on the H26. The front panel display will illuminate.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການຄວບຄຸມປະລິມານ

The H26 features a precise matrix relay volume control. Rotate the large knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. The current volume level will be displayed on the front panel.

4.2 ການຄັດເລືອກການປ້ອນຂໍ້ມູນ

Use the input selector button (typically on the front panel, refer to the device for exact location) to cycle through the available RCA and XLR inputs. The selected input will be indicated on the display.

4.3 Headphone Output Usage

Connect your headphones to one of the three front panel jacks: 6.35mm (unbalanced), 4.4mm (balanced), or 4-pin XLR (balanced). Ensure your headphones are compatible with the selected output type. The H26 can drive a wide range of headphones.

ກ່ອນປີ 4.4ampໜ້າທີ່ຂອງຕົວເພີ່ມສຽງ

The H26 can function as a dedicated preamplifier. To use it as a pure preamplifier, you can switch off the headphone amplifier power separately. Consult the front panel controls or menu options (if available) for this setting. This ensures that only the preamplifier section is active, optimizing performance for connected power amplifiers ຫຼືລໍາໂພງທີ່ໃຊ້ວຽກ.

ຮູບທີ 4.1: The Gustard H26 integrated into a home audio system, demonstrating its use with a remote control for convenient operation.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

To clean the exterior of the H26, use a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish. Ensure the unit is powered off and unplugged before cleaning.

5.2 ການພິຈາລະນາດ້ານສິ່ງແວດລ້ອມ

Place the H26 in a well-ventilated area to prevent overheating, especially given its Class A operation. Avoid direct sunlight, heat sources, and areas with high humidity or dust. Do not block the ventilation openings.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Gustard H26, please refer to the following common troubleshooting steps:

• ບໍ່ມີພະລັງງານ:
  • Check if the power cable is securely connected to both the H26 and the wall outlet.
  • Verify that the power switch on the rear panel is in the 'ON' position.
  • ຮັບປະກັນ voltagສະວິດເລືອກຖືກຕັ້ງຄ່າຢ່າງຖືກຕ້ອງສຳລັບພາກພື້ນຂອງທ່ານ.
  • Check the fuse in the AC input. If blown, replace it with a fuse of the same type and rating.
• ບໍ່ມີສຽງ:
  • Confirm that the correct input source is selected on the H26.
  • Check all audio cables (RCA, XLR, headphone) for secure connections.
  • Ensure the volume level is not set to minimum or muted.
  • If using as a preamplifier, ensure the connected power amplifier or active speakers are powered on and functioning correctly.
  • If using headphones, ensure they are properly plugged into the correct jack and are functional.
• ສຽງບິດເບືອນ ຫຼືສຽງລົບກວນ:
  • ກວດສອບສາຍສຽງທີ່ວ່າງ ຫຼື ເສຍຫາຍ.
  • Ensure the input source is not sending an excessively strong signal that could cause clipping.
  • Verify that the H26 is placed away from potential sources of electromagnetic interference (e.g., Wi-Fi routers, mobile phones).
  • If using balanced connections, ensure both ends are properly balanced.

7. ຂໍ້ມູນຈໍາເພາະ

The following table details the technical specifications of the Gustard H26 Discrete Class A Headphone Ampມີຊີວິດຊີວາ:

ຮູບທີ 7.1: Official technical specifications table for the Gustard H26, detailing input, preamplifier, ແລະ headphone amplifier performance metrics.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

8.1 ຂໍ້ມູນການຮັບປະກັນ

The Gustard H26 is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact your retailer.

8.2 ສະຫນັບສະຫນູນດ້ານວິຊາການ

If you require technical assistance or have questions not covered in this manual, please contact your authorized AOSHIDA retailer or the manufacturer's support channels. When contacting support, please have your product model (H26) and purchase information readily available.