1. ບົດແນະນຳ
Thank you for choosing the Projecta PJ-AC080-2 12V 8.0A 8-Stage Automatic Battery Charger. This charger is designed for automotive and marine lead acid batteries, offering a fully automatic, spark-free, and polarity-protected charging and maintenance solution. Its advanced 8-stage charging process ensures optimal battery health and longevity. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
Please read and understand all safety warnings and instructions before using this battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- ການລະບາຍອາກາດ: Always use the charger in a well-ventilated area. Batteries can produce explosive gases.
- ການປົກປ້ອງຕາແລະຜິວຫນັງ: Wear appropriate eye protection and clothing when working near batteries. Battery acid is corrosive.
- Spark-Free Connections: Ensure connections are made and broken in a spark-free manner. The charger is designed to be spark-free, but caution is always advised.
- Polarity: ເຊື່ອມຕໍ່ສາຍສາກບວກ (+) clamp to the positive (+) battery terminal and the negative (-) charger clamp to the negative (-) battery terminal. The charger is polarity protected.
- ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Always disconnect the AC power from the charger before connecting or disconnecting the battery clamps.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: ເກັບຮັກສາເຄື່ອງສາກ ແລະ ແບັດເຕີຣີໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະ ສັດລ້ຽງ.
- ອຸປະກອນເສຍຫາຍ: ຫ້າມໃຊ້ເຄື່ອງສາກ ຖ້າມັນໄດ້ຮັບຄວາມເສຍຫາຍໃນທາງໃດກໍ່ຕາມ.
- ການນໍາໃຊ້ພາຍໃນ: This charger is designed for indoor use. Do not expose to rain or excessive moisture.
3. ຜະລິດຕະພັນເກີນview ແລະຄຸນສົມບັດ
Figure 3.1: Projecta 12V 8.0A 8-Stage Automatic Battery Charger with power cord and battery clamps.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ອັດຕະໂນມັດຢ່າງເຕັມສ່ວນ: Simply connect and forget without the risk of overcharging.
- ແປດ Stages: Once connected, the charger will do the rest whether you're charging or maintaining the battery to keep it ready for use.
- Spark-Free and Polarity Protected: Safe to use while the battery is still in the vehicle.
- Fused Wiring Harness: Quick connect fused wiring harness for permanent installation (BCWH).
- All Included: Comes with harness, battery clamps, and 9.84 ft (3m) extension cable.
4. ສິ່ງທີ່ຢູ່ໃນກ່ອງ
Figure 4.1: All components included with the Projecta Battery Charger.
Your Projecta PJ-AC080-2 Battery Charger package should contain the following items:
- ໂປເຈັກຕາ 12V 8.0A 8-Stage Automatic Battery Charger Unit
- ແບັດເຕີຣີ Clamps (ສີແດງສໍາລັບທາງບວກ, ສີດໍາສໍາລັບການລົບ)
- Fused Wiring Harness with Ring Terminals (for permanent installation)
- 9.84 ft (3m) Extension Cable
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
5. ການຕິດຕັ້ງແລະການເຊື່ອມຕໍ່
Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Always connect the charger to the battery before plugging it into the AC power outlet.
- ການກະກຽມຫມໍ້ໄຟ: If the battery is in a vehicle, ensure the vehicle's ignition is off and all accessories are turned off. For marine applications, ensure the vessel is securely moored.
- ເຊື່ອມຕໍ່ຫມໍ້ໄຟ Clamps:
- ເຊື່ອມຕໍ່ ສີແດງບວກ (+) ໝໍ້ໄຟ clamp ກັບ ບວກ (+) ປາຍໄຟ.
- ເຊື່ອມຕໍ່ ສີດຳລົບ (-) ໝໍ້ໄຟ clamp ກັບ ລົບ (-) ປາຍໄຟ.
ຮູບທີ 5.1: ການເຊື່ອມຕໍ່ທີ່ຖືກຕ້ອງຂອງເຄື່ອງສາກໄຟກັບແບັດເຕີຣີລົດยนต์.
ຮູບທີ 5.2: ລາຍລະອຽດ view of the positive (red) and negative (black) battery clamps.
- Optional Fused Wiring Harness: For permanent installation, connect the ring terminals of the fused wiring harness to the battery terminals (red to positive, black to negative). This allows for quick connection/disconnection of the charger unit.
Figure 5.3: The included fused wiring harness for permanent battery connection.
- ເຊື່ອມຕໍ່ກັບພະລັງງານ AC: Once the battery connections are secure, plug the charger's AC power cord into a standard 120V AC wall outlet.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
The Projecta PJ-AC080-2 is a fully automatic 8-stage charger. Once connected to the battery and power, it will automatically detect the battery type and condition, then proceed through the optimal charging cycle.
8-ສtage ຂະບວນການສາກໄຟ:
ເຄື່ອງສາກໄຟໃຊ້ແບັດເຕີຣີ 8 ໜ່ວຍທີ່ຊັບຊ້ອນtage charging algorithm to ensure efficient and safe charging, extending battery life. The stages typically include:
- Desulfation: Recovers sulphated batteries by applying pulse current.
- Soft Start: Gently introduces current to the battery to prevent damage, especially for deeply discharged batteries.
- ຄ່າໃຊ້ຈ່າຍຫຼາຍ: Charges the battery at its maximum rate (8.0A) until it reaches approximately 80% capacity.
- ການດູດຊຶມ: Charges the battery at a decreasing ກະແສໄຟຟ້າເຖິງ 100% ຄວາມຈຸ.
- ການວິເຄາະ: Tests the battery to determine if it can hold a charge.
- ປັບສະພາບ: Applies a controlled overcharge to recondition and equalize the battery cells (if needed).
- ເລື່ອນ: Maintains the battery at a constant voltage, ready for use.
- Pulse Maintenance: Periodically pulses the battery to keep it optimally charged during long-term storage.
The charger's display will indicate the current voltage and charging status. No manual intervention is required during the charging process.
ຕັດການເຊື່ອມຕໍ່ເຄື່ອງສາກ:
ເພື່ອຕັດການເຊື່ອມຕໍ່ເຄື່ອງສາກ:
- ຖອດສາຍໄຟ AC ອອກຈາກປລັກສຽບໄຟ.
- Disconnect the negative (-) black clamp ຈາກສະຖານີຫມໍ້ໄຟ.
- Disconnect the positive (+) red clamp ຈາກສະຖານີຫມໍ້ໄຟ.
7. ບໍາລຸງຮັກສາ
Proper maintenance ensures the longevity and optimal performance of your Projecta battery charger.
- ທໍາຄວາມສະອາດ: Disconnect the charger from all power sources before cleaning. Wipe the casing ມີອ່ອນ, damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
- ການກວດສອບສາຍ: Regularly inspect the power cord, battery clamps, and all cables for any signs of damage, fraying, or corrosion. Do not use the charger if any cables are damaged.
- ການເກັບຮັກສາ: Store the charger in a cool, dry place when not in use. Keep it away from direct sunlight, excessive heat, and moisture.
- ສະຖານີແບັດເຕີຣີ: Ensure battery terminals are clean and free of corrosion before connecting the charger.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Projecta battery charger, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Charger does not turn on or display is blank. | No AC power; loose connection; faulty outlet. | Check if the charger is securely plugged into a live AC outlet. Test the outlet with another device. Ensure all connections are firm. |
| Charger connected but not charging (no charging indicator). | Incorrect battery connection (reversed polarity); battery too deeply discharged; faulty battery. | Verify positive (+) and negative (-) connections are correct. The charger has polarity protection, which may prevent operation if reversed. For very deeply discharged batteries, the charger may take time to initiate. If the battery is severely damaged, it may not accept a charge. |
| Charger enters error mode or displays an error code. | Internal fault; short circuit; battery fault. | Disconnect the charger from both AC power and the battery. Wait a few minutes, then reconnect. If the error persists, the charger or battery may be faulty. Consult customer support. |
| ເຄື່ອງສາກໄຟຈະອົບອຸ່ນໃນລະຫວ່າງການເຮັດວຽກ. | ໃຊ້ງານປົກກະຕິ; ລະບາຍອາກາດບໍ່ດີ. | It is normal for the charger to get warm during charging. Ensure adequate ventilation around the charger to prevent overheating. If it becomes excessively hot, disconnect immediately. |
9. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | PJ-AC080-2 |
| ການປ້ອນຂໍ້ມູນ Voltage | 120V AC (Standard US Outlet) |
| ຜົນໄດ້ຮັບ Voltage | 12 ໂວນ (DC) |
| ກຳລັງສາກໄຟ | 8.0 Amps |
| ການສາກໄຟ Stages | 8-ສtage ອັດຕະໂນມັດ |
| ປະເພດຫມໍ້ໄຟ | Lead Acid Batteries (WET, MF, CA/CA, AGM, GEL, EFB, LiFePO4 compatible) |
| ຂະໜາດສິນຄ້າ | 6.61 x 2.99 x 11.26 ນິ້ວ (16.8 x 7.6 x 28.6 cm) |
| ນ້ໍາຫນັກລາຍການ | 2.48 ປອນ (1.13 ກິໂລ) |
| ສີ | ດຳ |
| ຄຸນນະສົມບັດຄວາມປອດໄພ | Spark-Free, Polarity Protected, Overcharge Protection |
10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Projecta products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included with your product or visit the official Projecta webເວັບໄຊ.
If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact Projecta Customer Support. Contact information can typically be found on the Projecta webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.
ຊັບພະຍາກອນອອນໄລນ໌: For the latest information, FAQs, and product updates, please visit the official Projecta webເວັບໄຊ: www.projecta.com.au (ໝາຍເຫດ: ນີ້ແມ່ນຕົວຍຶດບ່ອນ URLກະລຸນາອ້າງອີງເອກະສານຜະລິດຕະພັນຕົວຈິງເພື່ອຄວາມຖືກຕ້ອງ webເວັບໄຊ).
