1. ການແນະນໍາແລະຜະລິດຕະພັນຫຼາຍກວ່າview
Thank you for choosing the BE COOL BC50LEF2301 50L Dehumidifier. This appliance is designed to efficiently remove excess moisture from the air in your home or commercial space, improving air quality and preventing issues like mold and mildew. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your dehumidifier.
Key features of your BE COOL BC50LEF2301 dehumidifier include:
- Powerful dehumidification: Removes up to 50 liters of moisture per day.
- Suitable for large areas: Effective in rooms up to 125 m³ (50 m²).
- User-friendly touch panel with LED display.
- Adjustable humidity levels from 30% to 80%.
- ຕູ້ເຢັນ R290 ເປັນມິດກັບສິ່ງແວດລ້ອມ.
- ຟັງຊັນຈັບເວລາ 24 ຊົ່ວໂມງ.
- ຟັງຊັນ defrost ອັດຕະໂນມັດ.
- Full water tank alarm and automatic shut-off.
- 7-liter removable water tank.
- Integrated dust filter.
- ພະລັງງານ outagໜ້າທີ່ຄວາມຈຳ e.
- ມີລໍ້ເພື່ອຄວາມສະດວກໃນການເຄື່ອນຍ້າຍ.

2. ຄໍາແນະນໍາຄວາມປອດໄພ
ກະລຸນາອ່ານຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດຢ່າງລະອຽດກ່ອນການນຳໃຊ້ເຄື່ອງໃຊ້ເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼື ຄວາມເສຍຫາຍ. ເກັບຄູ່ມືນີ້ໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ voltagລະບຸໄວ້ໃນປ້າຍກຳກັບການຈັດອັນດັບ. ຢ່າໃຊ້ເຄື່ອງໃນຂະນະທີ່ສາຍໄຟ ຫຼື ປລັກໄຟທີ່ເສຍຫາຍ. ຢ່າໃຊ້ປລັກໄຟຮ່ວມກັບເຄື່ອງໃຊ້ໄຟຟ້າອື່ນໆ.
- ການຈັດວາງ: Place the dehumidifier on a flat, stable surface. Maintain at least 20 cm (8 inches) clearance around the unit for proper airflow. Do not block air inlets or outlets.
- ຕູ້ເຢັນ: This appliance uses R290 refrigerant. Do not puncture the refrigerant circuit. Servicing should only be performed by qualified personnel.
- ຖັງນໍ້າ: Always empty the water tank before moving the unit. Do not drink the collected water.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງຢູ່ຫ່າງຈາກເຄື່ອງໃຊ້ໃນເວລາເຮັດວຽກ.
- ທໍາຄວາມສະອາດ: ຖອດປລັກເຄື່ອງທຸກຄັ້ງກ່ອນທຳຄວາມສະອາດ ຫຼື ບຳລຸງຮັກສາ.
- ເງື່ອນໄຂການດໍາເນີນງານ: Do not operate the unit in extremely high temperatures or in direct sunlight. The recommended operating temperature range is 5-32°C.
3. ອົງປະກອບຂອງຜະລິດຕະພັນ
ຄຸ້ນເຄີຍກັບສ່ວນປະກອບຫຼັກຂອງເຄື່ອງດູດຄວາມຊຸ່ມຂອງທ່ານ:
- ກະດານຄວບຄຸມ: Located on the top, with touch buttons and an LED display.
- ຊ່ອງສຽບອາກາດ: Top front, where dry air is expelled.
- ສາຍການບິນ: Rear, where humid air is drawn in.
- ການກັ່ນຕອງຂີ້ຝຸ່ນ: Located behind the air inlet, removable for cleaning.
- ຖັງນໍ້າ: Removable tank at the bottom front for collecting condensed water.
- ທາງອອກຂອງທໍ່ລະບາຍນ້ຳຢ່າງຕໍ່ເນື່ອງ: (If applicable) Located at the rear for connecting a drain hose.
- ລໍ້: ສໍາລັບການເຄື່ອນໄຫວງ່າຍຂອງຫນ່ວຍງານ.
- ມືຈັບ: ມືຈັບແບບປະສົມປະສານສໍາລັບການພົກພາ.


4. ຕັ້ງຄ່າ
- ການຫຸ້ມຫໍ່: ເອົາເຄື່ອງດູດຄວາມຊຸ່ມອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ. ເກັບຮັກສາວັດສະດຸຫຸ້ມຫໍ່ໄວ້ເພື່ອເກັບຮັກສາ ຫຼື ຂົນສົ່ງໃນອະນາຄົດ.
- ການຈັດວາງ:
- ວາງເຄື່ອງຕັ້ງຊື່ຢູ່ເທິງພື້ນຜິວທີ່ແຂງ, ມີລະດັບ.
- Ensure there is at least 20 cm (8 inches) of free space around the unit to allow for adequate air circulation.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas prone to splashing water.
- For optimal performance, operate the unit within the recommended temperature range of 5-32°C.
- ການເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into a grounded electrical outlet. Ensure the outlet meets the power requirements of the unit.
- ການນໍາໃຊ້ເບື້ອງຕົ້ນ: After transport, allow the unit to stand upright for at least 2 hours before plugging it in and turning it on. This allows the refrigerant to settle.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
The BE COOL BC50LEF2301 features an intuitive touch control panel and LED display for easy operation.

5.1 ການທໍາງານຂອງກະດານຄວບຄຸມ
- ປຸ່ມເປີດປິດ (⏻): ກົດເພື່ອເປີດ ຫຼືປິດເຄື່ອງ.
- ປຸ່ມໂໝດ (M): Cycles through different operating modes (e.g., Auto, Continuous, Drying).
- Humidity Setting (%): Adjusts the desired humidity level from 30% to 80% in 5% increments.
- ປຸ່ມຄວາມໄວພັດລົມ (☰): Selects between two fan speeds (High/Low).
- ປຸ່ມຈັບເວລາ (⏱): Sets the 24-hour timer for automatic power ON or OFF.
- ຈໍສະແດງຜົນ LED: ສະແດງໃຫ້ເຫັນຄວາມຊຸ່ມຊື່ນໃນປັດຈຸບັນ, ຕັ້ງຄວາມຊຸ່ມຊື່ນ, ຫຼືການຕັ້ງຄ່າຈັບເວລາ.
5.2 ການຕັ້ງຄ່າຄວາມຊຸ່ມຊື່ນທີ່ຕ້ອງການ
Press the Humidity Setting button (%) repeatedly to cycle through desired humidity levels. The display will show the selected percentage. The unit will operate until the room humidity reaches the set level, then pause. It will resume operation if the humidity rises above the set level.

5.3 ຟັງຊັນຈັບເວລາ
ໂມງຈັບເວລາ 24 ຊົ່ວໂມງຊ່ວຍໃຫ້ທ່ານສາມາດຕັ້ງເວລາສະເພາະໃຫ້ເຄື່ອງເປີດ ຫຼື ປິດໂດຍອັດຕະໂນມັດ.
- ເພື່ອຕັ້ງຄ່າປິດອັດຕະໂນມັດ: While the unit is ON, press the Timer button. Use the humidity setting buttons (or dedicated timer adjustment buttons if present) to set the desired number of hours (1-24) after which the unit will turn off.
- ເພື່ອຕັ້ງຄ່າເປີດອັດຕະໂນມັດ: While the unit is OFF, press the Timer button. Set the desired number of hours (1-24) after which the unit will turn on.
5.4 Water Tank Full Alarm and Auto Shut-off
When the 7-liter water tank is full, the unit will automatically stop operating, and an alarm will sound (beep). The LED display may also indicate a full tank. Empty the water tank and reinsert it correctly to resume operation.

5.5 ການລະບາຍນ້ໍາຢ່າງຕໍ່ເນື່ອງ
For extended operation without needing to empty the water tank, you can connect a drain hose to the continuous drainage outlet at the rear of the unit. Ensure the hose is sloped downwards to allow gravity drainage into a suitable receptacle or floor drain.
5.6 ຟັງຊັນ defrost
The unit is equipped with an automatic defrost function. If frost builds up on the evaporator coils, the unit will temporarily stop dehumidifying and run the fan to melt the frost. Dehumidification will resume automatically once the defrost cycle is complete.

6. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດແລະຍືດອາຍຸຊີວິດຂອງເຄື່ອງ dehumidifier ຂອງທ່ານ.
6.1 ການເຮັດຄວາມສະອາດເຄື່ອງກອງຂີ້ຝຸ່ນ
- ປິດເຄື່ອງ ແລະຖອດປລັກອອກຈາກປລັກສຽບໄຟ.
- Locate the air inlet grille at the rear of the unit.
- ຖອດກອງກອງຂີຸ້່ນອອກ.
- Clean the filter with a vacuum cleaner or wash it with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinserting.
- Reinsert the dry filter and close the grille.
Recommendation: Clean the dust filter every two weeks or more frequently depending on usage and air quality.
6.2 ການລ້າງຖັງນໍ້າ
- When the water tank is full, the unit will stop operating and alert you.
- ດຶງຖັງນ້ໍາອອກຈາກດ້ານຫນ້າຂອງຫນ່ວຍງານຢ່າງລະມັດລະວັງ.
- ຖອກນ້ຳທີ່ເກັບໄວ້ອອກ.
- Clean the tank periodically with mild detergent and water to prevent mold growth. Rinse thoroughly.
- Reinsert the empty tank firmly into the unit. Ensure it is correctly seated to allow the unit to resume operation.
6.3 ການອະນາໄມໜ່ວຍບໍລິການພາຍນອກ
ເຊັດດ້ານນອກຂອງຫນ່ວຍງານດ້ວຍຄວາມອ່ອນໂຍນ, ງamp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ, ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ຫຼື ຕົວລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍພື້ນຜິວໄດ້.
6.4 ການເກັບຮັກສາ
ຖ້າເກັບຮັກສາເຄື່ອງສໍາລັບໄລຍະເວລາຂະຫຍາຍ:
- ຖອດປລັກເຄື່ອງ ແລະ ຖອກນໍ້າອອກໃຫ້ໝົດ.
- Clean the dust filter and the exterior.
- Allow the unit to dry completely for at least 24 hours in a well-ventilated area.
- ເກັບຮັກສາອຸປະກອນໃຫ້ຕັ້ງຊື່ໄວ້ໃນບ່ອນທີ່ເຢັນແລະແຫ້ງ, ດີກວ່າທີ່ຈະເກັບໄວ້ໃນກ່ອງບັນຈຸເດີມ.
7. ການແກ້ໄຂບັນຫາ
ກ່ອນທີ່ຈະຕິດຕໍ່ຫາຝ່າຍສະໜັບສະໜູນລູກຄ້າ, ກະລຸນາອ້າງອີງຄູ່ມືການແກ້ໄຂບັນຫາຕໍ່ໄປນີ້ສຳລັບບັນຫາທົ່ວໄປ:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍບໍລິການບໍ່ເປີດ. | ບໍ່ມີການສະຫນອງພະລັງງານ. ສາຍໄຟບໍ່ໄດ້ເຊື່ອມຕໍ່ຢ່າງຖືກຕ້ອງ. Water tank full or not correctly inserted. | ກວດເບິ່ງປລັກສຽບໄຟແລະເຄື່ອງຕັດວົງຈອນ. ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ສຽບສາຍໄຟຢ່າງປອດໄພ. Empty water tank and reinsert it correctly. |
| ເຄື່ອງກຳລັງເຮັດວຽກແຕ່ບໍ່ໄດ້ກຳຈັດຄວາມຊຸ່ມ. | ອຸນຫະພູມຫ້ອງຕໍ່າເກີນໄປ (ຕໍ່າກວ່າ 5°C). ການກັ່ນຕອງອາກາດອຸດຕັນ. Humidity setting is higher than current room humidity. ປະຕູ/ປ່ອງຢ້ຽມເປີດ. | Operate unit within recommended temperature range. ເຮັດຄວາມສະອາດເຄື່ອງກອງອາກາດ. ຕັ້ງຄ່າຄວາມຊຸ່ມຊື່ນທີ່ຕ້ອງການໃຫ້ຕ່ຳກວ່າຄວາມຊຸ່ມຊື່ນໃນຫ້ອງໃນປະຈຸບັນ. Close doors and windows to isolate the room. |
| ໄຟສະແດງນ້ຳເຕັມໃນຖັງເປີດຢູ່, ແຕ່ຖັງຍັງບໍ່ເຕັມ. | ບໍ່ໄດ້ໃສ່ຖັງນໍ້າຢ່າງຖືກຕ້ອງ. ປຸ່ມລອຍເຮັດວຽກຜິດປົກກະຕິ. | ຖອດຖັງນໍ້າອອກ ແລະ ໃສ່ຄືນໃຫ້ແໜ້ນ. ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າຖ້າບັນຫາຍັງຄົງຢູ່. |
| ໜ່ວຍມີສຽງດັງ. | ຫນ່ວຍງານບໍ່ຢູ່ໃນພື້ນຜິວລະດັບ. ການກັ່ນຕອງອາກາດອຸດຕັນ. ບັນຫາອົງປະກອບພາຍໃນ. | ວາງ ໜ່ວຍ ບໍລິເວນພື້ນທີ່ຮາບພຽງແລະຫມັ້ນຄົງ. ເຮັດຄວາມສະອາດເຄື່ອງກອງອາກາດ. ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ. |
| ອາກາດຫນາວຢູ່ເທິງທໍ່. | ອຸນຫະພູມຫ້ອງຕໍ່າເກີນໄປ. | The unit's automatic defrost function should activate. If not, turn off the unit and allow it to defrost naturally. Ensure operating temperature is above 5°C. |
If the problem persists after trying these solutions, please contact BE COOL customer support.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | ເຢັນ |
| ໝາຍເລກຕົວແບບ | BC50LEF2301 |
| ຄວາມອາດສາມາດ Dehumidification | Approx. 50 Liters/24h |
| ຄວາມອາດສາມາດຂອງຖັງນໍ້າ | 7 ລິດ |
| ພະລັງງານ | 680 ວັດ |
| ຂະໜາດຫ້ອງທີ່ແນະນຳ | Up to 125 m³ (50 m²) |
| ຂະໜາດສິນຄ້າ (L x W x H) | 26.6 x 37.8 x 61.5 cm |
| ນ້ໍາຫນັກລາຍການ | 19 ກິໂລກຣາມ |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຕູ້ເຢັນ | R290 (ເປັນມິດກັບສິ່ງແວດລ້ອມ) |
| ຄວາມໄວພັດລົມ | 2 |
| ຄຸນນະສົມບັດພິເສດ | Two fan levels, Dust filter, Full water tank alarm, Defrost function, Power outage memory, 24-hour timer, Touch panel, Removable tank, Wheels. |

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This BE COOL dehumidifier comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BE COOL customer support. Contact information can typically be found on the product packaging, the official BE COOL webເວັບໄຊ, ຫຼືໃບຮັບເງິນຊື້ຂອງທ່ານ.
When contacting support, please have your model number (BC50LEF2301) and purchase date ready.