Instruction Manual for SHENGLE JR1932RX-P-24V Control Kit

ສິນຄ້າເກີນview

This kit provides a replacement 2.4G Bluetooth remote control and a JR1932RX-P-24V receiver control box motherboard for children's electric ride-on cars. It is designed to restore or upgrade the remote control functionality of compatible ride-on vehicles.

• ໝາຍເລກຕົວແບບ: JR1932RX-P-24V
• ຄວາມເຂົ້າກັນໄດ້: Designed for specific electric ride-on car models. Please verify compatibility with your original parts before purchase.
• ພະລັງງານ: Operates on DC 24V with a maximum load current of 35A.
• ການຄວບຄຸມໄລຍະໄກ: Utilizes 2.4G Bluetooth technology for stable connection.
• ແບັດເຕີຣີ: ແບດເຕີຣີສໍາລັບການຄວບຄຸມຫ່າງໄກສອກຫຼີກບໍ່ໄດ້ລວມ.

Image 1: The SHENGLE JR1932RX-P-24V receiver control box and its accompanying 2.4G Bluetooth remote control. The control box is dark gray with a label indicating its model number and electrical specifications. The remote control is white with black buttons for directional movement and other functions.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation and pairing are essential for the correct operation of the control kit. Always ensure the ride-on car's power is off before beginning installation.

1. Control Box Installation

1. ຕັດການເຊື່ອມຕໍ່ພະລັງງານ: Before handling any electrical components, ensure the ride-on car's battery is disconnected to prevent electrical shock or damage.
2. Locate Old Control Box: Identify the location of the existing control box in your ride-on car. This is typically found under the seat or hood.
3. ເອົາກ່ອງຄວບຄຸມເກົ່າອອກ: Carefully disconnect all wiring harnesses and mounting screws from the old control box. Note the orientation and connection points for reassembly.
4. Install New Control Box: Position the new JR1932RX-P-24V control box in the same location. Secure it using the original mounting screws or appropriate fasteners.
5. ເຊື່ອມຕໍ່ສາຍໄຟ: Reconnect all wiring harnesses to the new control box. Ensure each connector is firmly seated. Refer to your ride-on car's original wiring diagram if available.
6. ເຊື່ອມຕໍ່ແບັດເຕີຣີຄືນໃໝ່: Once all connections are secure, reconnect the ride-on car's battery.

ຮູບພາບ 2: A ລາຍລະອຽດ view of the SHENGLE JR1932RX-P-24V control box, highlighting its various ports and the label with electrical specifications. This image is useful for identifying connection points during installation.

2. ການຕິດຕັ້ງຫມໍ້ໄຟຄວບຄຸມໄລຍະໄກ

• ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງການຄວບຄຸມໄລຍະໄກ.
• ເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟ.
• Insert the required batteries (typically AAA or AA, check the remote's markings) ensuring correct polarity (+/-).
• ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

3. ການຈັບຄູ່ການຄວບຄຸມໄລຍະໄກ

The instructions for pairing the remote control with the receiver are clearly printed on the packaging box of the product. Please refer to these specific instructions for the most accurate pairing procedure. Generally, the process involves:

• Turning on the ride-on car.
• Pressing and holding a specific button (often a "code" or "pair" button) on the remote control for a few seconds.
• Observing an indicator light on the remote or car to confirm successful pairing.

If pairing is unsuccessful, ensure the remote control has fresh batteries and that the control box is correctly installed and powered.

ຄໍາແນະນໍາການດໍາເນີນງານ

Once the control box is installed and the remote control is paired, you can operate the ride-on car remotely.

ຟັງຊັນການຄວບຄຸມໄລຍະໄກ

• ປຸ່ມເປີດປິດ: ເປີດ/ປິດການຄວບຄຸມໄລຍະໄກ.
• ປຸ່ມໄປໜ້າ/ກັບຫຼັງ: Control the car's movement forward or backward.
• ປຸ່ມລ້ຽວຊ້າຍ/ຂວາ: Steer the car left or right.
• ການປັບຄວາມໄວ: Some remotes include buttons to adjust the car's speed (e.g., low, medium, high).
• ປຸ່ມຢຸດສຸກເສີນ: A dedicated button (often red) to immediately stop the car for safety.

Always supervise children when operating the ride-on car, especially when using the remote control. Ensure the operating area is clear of obstacles and hazards.

ການບໍາລຸງຮັກສາແລະການດູແລ

To ensure the longevity and optimal performance of your SHENGLE control kit, follow these maintenance guidelines:

• ທໍາຄວາມສະອາດ: Wipe the control box and remote control with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
• ການເກັບຮັກສາ: Store the components in a cool, dry place away from direct sunlight and extreme temperatures.
• ການດູແລຫມໍ້ໄຟ: Remove batteries from the remote control if it will not be used for an extended period to prevent leakage.
• ການປົກປ້ອງຄວາມຊຸ່ມ: Protect the control box and remote from water and excessive moisture, as this can cause damage.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your SHENGLE control kit, refer to the following common problems and solutions:

Image 3: An angled perspective of the SHENGLE JR1932RX-P-24V control box, showing its compact design and connection ports from a different view. This can assist in visualizing the component's placement within the ride-on car.

ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty information or technical support regarding your SHENGLE JR1932RX-P-24V control kit, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

ຜູ້ຜະລິດ: SHENGLE ELECTRONIC

ໂດຍທົ່ວໄປແລ້ວຂໍ້ມູນການຕິດຕໍ່ສາມາດພົບໄດ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຫຼືເຈົ້າຫນ້າທີ່ຂອງຜູ້ຜະລິດ webເວັບໄຊ.