ຄູ່ມືຜູ້ໃຊ້ລົດຖີບໄຟຟ້າ Fafrees F20 PRO

ແນະນຳ

Thank you for choosing the Fafrees F20 PRO Electric Bike. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure proper usage and to maximize the lifespan of your bike.

Image: The Fafrees F20 PRO Electric Bike, black in color, shown from a three-quarter front view, highlighting its foldable frame, fat tires, and included storage bag.

ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety when operating your electric bike. Failure to follow safety guidelines can result in serious injury or damage to the bike.

• Always wear a helmet that meets local safety standards.
• ໃຫ້ແນ່ໃຈວ່າອົງປະກອບທັງໝົດຖືກມັດໄວ້ຢ່າງປອດໄພກ່ອນການຂັບຂີ່ແຕ່ລະຄັ້ງ.
• ຄຸ້ນເຄີຍກັບກົດໝາຍຈະລາຈອນທ້ອງຖິ່ນ ແລະ ລະບຽບການກ່ຽວກັບລົດຖີບໄຟຟ້າ.
• ຢ່າຂີ່ລົດພາຍໃຕ້ອິດທິພົນຂອງເຫຼົ້າຫຼືຢາເສບຕິດ.
• ລະວັງສິ່ງອ້ອມຂ້າງຂອງເຈົ້າ ແລະຜູ້ໃຊ້ຖະໜົນຄົນອື່ນໆ.
• Avoid riding in adverse weather conditions, such as heavy rain or snow, if possible.
• Regularly check tire pressure, brake function, and battery charge level.

ເນື້ອໃນຊຸດ

ເມື່ອເປີດຊຸດດັ່ງກ່າວ, ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດຕໍ່ໄປນີ້ແມ່ນລວມຢູ່ແລ້ວ:

• 1 x Fafrees F20 PRO Electric Bike (partially assembled)
• ເຄື່ອງສາກແບັດເຕີຣີ 1 x
• 1 x Gift Box (contents may vary)
• 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ການຕິດຕັ້ງແລະການປະກອບ

The Fafrees F20 PRO Electric Bike comes partially assembled. Follow these steps to complete the assembly:

1. Unfolding the Frame: Carefully unfold the main frame of the bike until it locks into place. Ensure the folding mechanism is securely latched.
2. ການ​ຕິດ​ຕັ້ງ Handlebar ໄດ້​: Insert the handlebar stem into the fork tube and tighten the quick-release lever or bolts as instructed. Ensure the handlebar is aligned with the front wheel.
3. ການ​ຕິດ​ຕັ້ງ pedals​: Identify the left (L) and right (R) pedals. Screw them into the corresponding crank arms. Note that the left pedal has a reverse thread. Tighten firmly with a wrench.
4. Installing the Seat Post and Saddle: Insert the seat post with the saddle attached into the seat tube. Adjust the height to a comfortable riding position and secure it with the quick-release clamp. Important: Do not install the seat tube below the safe line marked on the post.
5. ການ​ຕິດ​ຕັ້ງ​ໄຟ​ຫນ້າ​: Attach the LED headlight to the designated mounting point on the front of the bike, usually on the fork or handlebar stem. Connect any necessary wiring.
6. ການ​ຕິດ​ຕັ້ງ​ຫມໍ້​ໄຟ​: The battery may come pre-installed or require insertion. If not installed, slide the battery into its compartment (often within the frame or behind the seat tube) until it clicks into place. Ensure it is locked with the key if applicable.
7. ການສາກແບັດເຕີຣີເບື້ອງຕົ້ນ: Before your first ride, fully charge the battery using the provided charger. Connect the charger to the bike's charging port and then to a power outlet. The indicator light on the charger will show charging status.
8. ກວດເຊັກລ່ວງໜ້າ: Before riding, check tire pressure, brake functionality (front and rear), and ensure all bolts and quick releases are tight.

ຮູບພາບ: A close-up view of the Fafrees F20 PRO's frame, illustrating the removable 18AH lithium battery compartment and the process of inserting and removing the battery.

ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ

To power on the bike, press and hold the power button on the LCD display. To power off, press and hold the same button until the display turns off.

ຟັງຊັນ LCD

The smart LCD display provides real-time information about your ride:

• ຄວາມໄວ: ຄວາມ​ໄວ​ການ​ຂັບ​ເຄື່ອນ​ໃນ​ປະ​ຈຸ​ບັນ​.
• ລະດັບຫມໍ້ໄຟ: ຊີ້ບອກການສາກແບັດເຕີຣີທີ່ຍັງເຫຼືອ.
• ໄລຍະທາງ: Displays trip distance or total odometer reading.
• ລະດັບເກຍ/PAS: Shows the current pedal assist level (PAS).
• Walk Assistance Mode: ເປີດໃຊ້ງານການຊ່ວຍເຫຼືອຄວາມໄວຕ່ຳສຳລັບການຍ່າງລົດຖີບ.
• Cruise Control: Maintains a set speed without continuous throttle input.

ຮູບພາບ: A ລາຍລະອຽດ view of the Fafrees F20 PRO's handlebar, showcasing the smart color LCD display, bell, gear shift lever, power-off brake levers, and thumb throttle.

ຮູບແບບການຂີ່

• ໂໝດ​ການ​ຊ່ວຍ​ຖີບ​ຕີນ (PAS): The motor provides assistance as you pedal. Adjust the assist level using the display controls (usually '+' and '-' buttons). Higher levels provide more assistance.
• ຮູບແບບໄຟຟ້າເຕັມຮູບແບບ: Use the thumb throttle to propel the bike without pedaling. This mode consumes battery faster.
• ໂໝດຄູ່ມື: ຂີ່ລົດຖີບຄືກັບລົດຖີບແບບດັ້ງເດີມໂດຍບໍ່ມີການຊ່ວຍເຫຼືອດ້ານມໍເຕີ.

Gears and Shifting

The F20 PRO is equipped with a 7-speed derailleur system. Use the gear shifter on the handlebar to change gears according to terrain and desired pedaling effort. Shift gears smoothly by easing off the pedals slightly during the shift.

ລະບົບເບກ

The bike features front and rear mechanical 160mm disc brakes with power-off brake levers. Squeeze both brake levers simultaneously for effective and safe stopping. The power-off feature cuts motor power when brakes are applied.

Image: A close-up of the Fafrees F20 PRO's front wheel, highlighting the mechanical disc brake system, including the rotor, caliper, and power-off brake lever, emphasizing its stopping capabilities.

ບໍາລຸງຮັກສາ

Regular maintenance is crucial for the longevity and safe operation of your Fafrees F20 PRO Electric Bike.

• ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດລົດຖີບເປັນປະຈໍາດ້ວຍການໂຄສະນາamp ຜ້າ. ຫຼີກເວັ້ນການນໍາໃຊ້ເຄື່ອງຊັກຜ້າທີ່ມີຄວາມກົດດັນສູງໂດຍກົງໃສ່ອົງປະກອບໄຟຟ້າ.
• ການລະບາຍສີ: Lubricate the chain and other moving parts (e.g., derailleur pivots) periodically with bicycle-specific lubricant.
• ຢາງລົດ: Check tire pressure before each ride. The recommended pressure is usually indicated on the tire sidewall. Inspect tires for wear and damage.
• ເບກ: Regularly check brake pads for wear and ensure brake levers provide firm and responsive stopping power. Adjust brake cables as needed.
• ການດູແລຫມໍ້ໄຟ:
  • Charge the battery fully after each ride, especially if it's been significantly discharged.
  • ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ສຸດ.
  • If storing the bike for an extended period, charge the battery to 50-70% every 1-2 months.
• fasteners: Periodically check all bolts, nuts, and quick releases for tightness.

ການແກ້ໄຂບັນຫາ

This section addresses common issues you might encounter with your Fafrees F20 PRO Electric Bike.

ຂໍ້ມູນຈໍາເພາະ

Image: An illustration of the Fafrees F20 PRO's 250W brushless rear hub motor, detailing its internal components, along with icons indicating 40 Nm motor torque, 25 km/h max speed, and 7-speed Shimano gearing.

Image: A close-up of the Fafrees F20 PRO's front suspension fork and 20x3.0 inch fat tire, with an inset showing the suspension lock/open mechanism. Below are illustrations of various terrains (sand, mud, gravel, flat road) the fat tires can handle.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Fafrees provides a limited warranty for the F20 PRO Electric Bike. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or warranty claims, please contact the official Fafrees customer service or the authorized seller from whom you purchased the product.

ຜູ້ຂາຍ: Fafrees_Official Ebike Store

Keep your purchase receipt and the bike's serial number (usually located on the frame) readily available when contacting support.