Grandstream GWN7811

Grandstream GWN7811 8-Port Gigabit Ethernet Layer 3 Managed Network Switch User Manual

ຮູບແບບ: GWN7811

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the installation, configuration, and operation of the Grandstream GWN7811 8-Port Gigabit Ethernet Layer 3 Managed Network Switch. Please read this manual thoroughly before using the device to ensure proper setup and functionality.

2. ຂໍ້ມູນຄວາມປອດໄພ

Observe the following safety precautions to prevent damage to the device and ensure personal safety:

  • Install the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • ໃຊ້ພຽງແຕ່ອະແດັບເຕີໄຟທີ່ໃຫ້ມາກັບອຸປະກອນ.
  • ຢ່າເປີດອຸປະກອນ casing. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
  • ຮັບປະກັນການຖົມດິນຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນອັນຕະລາຍຈາກໄຟຟ້າ.
  • ຫຼີກເວັ້ນການວາງວັດຖຸຫນັກໃສ່ອຸປະກອນ.

3. ຜະລິດຕະພັນເກີນview

3.1 ເນື້ອໃນຊຸດ

The GWN7811 package typically includes:

  • Grandstream GWN7811 Managed Network Switch
  • Power Adapter
  • ຄູ່ມືການຕິດຕັ້ງດ່ວນ
  • ຊຸດຕິດຕັ້ງ Rack-mount (ຖ້າມີ)

Note: No additional components are included beyond the standard package.

3.2 ຮູບແບບແຜງດ້ານໜ້າ

Front panel of the Grandstream GWN7811 switch showing 8 RJ45 Gigabit Ethernet ports, 2 SFP+ ports, Console port, RST button, and SYS LED.

ຮູບທີ 1: Front Panel of GWN7811 Switch. This image displays the front view of the Grandstream GWN7811 switch, highlighting its 8 Gigabit Ethernet RJ45 ports, 2 SFP+ ports for fiber connections, a Console port for command-line interface access, a Reset (RST) button, and a System (SYS) LED indicator. Each RJ45 port also has individual LED indicators.

The front panel of the GWN7811 switch features the following components:

  • 8x GbE RJ45 Ports: Standard Gigabit Ethernet ports for connecting network devices.
  • ພອດ SFP+ 2x: 10 Gigabit Small Form-Factor Pluggable Plus ports for high-speed fiber optic connections.
  • CONSOLE Port: RJ45 console port for local management via a serial connection.
  • ປຸ່ມ RST: Reset button for factory default restoration or reboot.
  • SYS LED: System status indicator LED.
  • Port LEDs: Individual LEDs for each RJ45 port indicating link/activity status.

3.3 ການວາງແຜງດ້ານຫຼັງ

Rear panel of the Grandstream GWN7811 switch showing the power input and ventilation slots.

ຮູບທີ 2: Rear Panel of GWN7811 Switch. This image shows the rear view of the Grandstream GWN7811 switch, primarily featuring the power input connector and ventilation slots. The device is fanless, relying on passive cooling.

The rear panel of the GWN7811 switch typically contains the power input connector and ventilation openings. This model is designed to be fanless for silent operation.

3.4 ຕົວຊີ້ວັດ LED

ຕາຕະລາງ 1: ຕົວຊີ້ວັດສະຖານະ LED
LEDສະຖານະລາຍລະອຽດ
SYSສີຂຽວແຂງອຸປະກອນຖືກເປີດ ແລະເຮັດວຽກຕາມປົກກະຕິ.
SYSກະພິບສີຂຽວອຸປະກອນກຳລັງເປີດເຄື່ອງ ຫຼື ອັບເກຣດເຟີມແວ.
SYSປິດDevice is powered off or experiencing a critical error.
Port (Green)ສີຂຽວແຂງLink established at Gigabit speed.
Port (Green)ກະພິບສີຂຽວActivity on the port at Gigabit speed.
Port (Amber)Amber ແຂງLink established at 10/100 Mbps speed.
Port (Amber)ກະພິບ AmberActivity on the port at 10/100 Mbps speed.
ທ່າເຮືອປິດNo link or port is disabled.

4. ການຕິດຕັ້ງຮາດແວ

4.1 ການຕິດຕັ້ງ Switch

The GWN7811 can be placed on a desktop or mounted in a standard 19-inch equipment rack. Ensure adequate ventilation around the device.

  • ການຈັດວາງ Desktop: ວາງສະຫຼັບຢູ່ເທິງພື້ນຜິວທີ່ຮາບພຽງ.
  • ການຕິດຕັ້ງ Rack: Attach the provided rack-mount brackets to the sides of the switch using the included screws. Secure the switch into the rack using appropriate rack screws.

4.2 ການເຊື່ອມຕໍ່ພະລັງງານ

  1. Connect the power adapter to the power input port on the rear panel of the GWN7811.
  2. ສຽບປາຍອື່ນຂອງອະແດບເຕີໄຟຟ້າເຂົ້າໄປໃນປ່ຽງໄຟຟ້າທີ່ເຫມາະສົມ.
  3. Verify that the SYS LED on the front panel illuminates, indicating the device is receiving power.

4.3 ການເຊື່ອມຕໍ່ສາຍເຄືອຂ່າຍ

  • ຜອດ RJ45: Connect standard Ethernet cables from your network devices (computers, servers, other switches) to the 8x GbE RJ45 ports.
  • ຜອດ SFP+: Insert compatible SFP+ transceivers into the 2x SFP+ ports, then connect fiber optic cables to the transceivers for high-speed uplinks or downlinks.
  • ຜອດຄອນໂຊນ: For initial configuration or advanced troubleshooting, connect a serial cable from your computer to the CONSOLE port.

5. ການຕັ້ງຄ່າເບື້ອງຕົ້ນ

5.1 ການເຂົ້າເຖິງ Web ສ່ວນຕິດຕໍ່ຜູ້ໃຊ້ (Web UI)

The GWN7811 can be managed via a web-based graphical user interface (GUI).

  1. Connect a computer directly to any of the GWN7811's RJ45 ports.
  2. Ensure your computer's IP address is in the same subnet as the switch's default IP address (e.g., 192.168.1.x). The default IP address for the GWN7811 is typically 192.168.1.1.
  3. ເປີດ ກ web browser ແລະໃສ່ທີ່ຢູ່ IP ເລີ່ມຕົ້ນຂອງ switch (ເຊັ່ນ: http://192.168.1.1) ເຂົ້າໄປໃນແຖບທີ່ຢູ່.
  4. Enter the default username and password (refer to the Quick Installation Guide or device label for default credentials).
  5. ເມື່ອເຂົ້າສູ່ລະບົບສຳເລັດແລ້ວ, ທ່ານຈະສາມາດເຂົ້າເຖິງ Web UI for further configuration.

5.2 Basic Network Settings

After logging in, it is recommended to configure basic network settings:

  • ປ່ຽນລະຫັດຜ່ານເລີ່ມຕົ້ນ: ເພື່ອຄວາມປອດໄພ, ໃຫ້ປ່ຽນລະຫັດຜ່ານຂອງຜູ້ເບິ່ງແຍງລະບົບຕາມຄ່າເລີ່ມຕົ້ນໃນທັນທີ.
  • ການຕັ້ງຄ່າທີ່ຢູ່ IP: Configure a static IP address for the switch that is suitable for your network environment, or enable DHCP client if applicable.
  • ເວລາລະບົບ: Set the correct system time and configure NTP (Network Time Protocol) for accurate time synchronization.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

The GWN7811 is a Layer 3 managed switch, offering advanced features for network control and optimization.

6.1 ຄຸນສົມບັດຂອງຊັ້ນທີ 3

  • ເສັ້ນທາງຄົງທີ່: ຕັ້ງຄ່າເສັ້ນທາງຄົງທີ່ເພື່ອຊີ້ນຳການຈະລາຈອນລະຫວ່າງ subnets IP ທີ່ແຕກຕ່າງກັນ.
  • Inter-VLAN Routing: Enable routing between configured VLANs to allow communication across different broadcast domains.
  • DHCP Server/Relay: The switch can act as a DHCP server for connected devices or relay DHCP requests to an external server.

6.2 ການຕັ້ງຄ່າ VLAN

Virtual Local Area Networks (VLANs) segment your network into logical broadcast domains, improving security and performance.

  1. ໄປທີ່ພາກສ່ວນ VLAN ໃນ Web UI
  2. Create new VLANs by assigning a VLAN ID and name.
  3. Assign ports to specific VLANs as either access ports (for end devices) or trunk ports (for connecting to other switches).

6.3 ຄຸນນະພາບການບໍລິການ (QoS)

QoS allows you to prioritize network traffic, ensuring critical applications receive sufficient bandwidth.

  • Configure QoS policies based on port, VLAN, IP address, or DSCP values.
  • Apply bandwidth control to limit or guarantee bandwidth for specific traffic types.

7. ບໍາລຸງຮັກສາ

7.1 ການຍົກລະດັບ Firmware

Regularly update the switch firmware to ensure optimal performance, security, and access to new features.

  1. Download the latest firmware from the official Grandstream webເວັບໄຊ.
  2. ເຂົ້າເຖິງພາກສ່ວນອັບເກຣດເຟີມແວໃນ Web UI
  3. ອັບໂຫຼດເຟີມແວ file ແລະປະຕິບັດຕາມຄໍາແນະນໍາໃນຫນ້າຈໍ. ຢ່າປິດອຸປະກອນໃນລະຫວ່າງການປັບປຸງ.

7.2 ການຕັ້ງຄ່າ Backup ແລະ Restore

It is recommended to regularly back up your switch configuration to prevent data loss.

  • ສຳ ຮອງ: ໃນ Web UI, navigate to the maintenance section and download the current configuration file ກັບ​ຄອມ​ພິວ​ເຕີ​ຂອງ​ທ່ານ​.
  • Restore: To restore a configuration, upload a previously saved configuration file ຜ່ານ Web UI

8. ການແກ້ໄຂບັນຫາ

8.1 ບັນຫາທົ່ວໄປ ແລະການແກ້ໄຂ

  • ບໍ່ມີພະລັງງານ:
    • ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີໄຟຟ້າໄດ້ເຊື່ອມຕໍ່ກັບທັງສະວິດ ແລະ ປລັກໄຟທີ່ໃຊ້ງານໄດ້ຢ່າງແໜ້ນໜາແລ້ວ.
    • ກວດ​ສອບ​ວ່າ​ປ່ຽງ​ໄຟ​ແມ່ນ​ເຮັດ​ວຽກ​ໄດ້​.
  • ບໍ່ມີລິ້ງໃນພອດ:
    • ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍ Ethernet ຢູ່ທັງສອງສົ້ນ.
    • ໃຫ້ແນ່ໃຈວ່າອຸປະກອນທີ່ເຊື່ອມຕໍ່ນັ້ນເປີດຢູ່ ແລະ ເຮັດວຽກຢ່າງຖືກຕ້ອງ.
    • Verify the port status in the Web UI; ensure it is not disabled.
    • ລອງໃຊ້ພອດ ຫຼື ສາຍອື່ນ.
  • ບໍ່ສາມາດເຂົ້າເຖິງໄດ້ Web UI:
    • Verify your computer's IP address is in the same subnet as the switch.
    • Ensure the switch is powered on and the SYS LED is solid green.
    • ລຶບລ້າງແຄດຂອງບຼາວເຊີຂອງທ່ານ ຫຼືລອງໃຊ້ໂປຣແກຣມທ່ອງເວັບອື່ນ.
    • If the IP address was changed and forgotten, a factory reset might be necessary (refer to the Reset button section).

8.2 ຣີເຊັດເປັນຄ່າໂຮງງານ

To restore the GWN7811 to its factory default settings:

  1. With the device powered on, use a paperclip or a similar pointed object to press and hold the RST button on the front panel for approximately 10 seconds.
  2. Release the button when the SYS LED starts flashing rapidly.
  3. The device will reboot with factory default settings.

Warning: A factory reset will erase all custom configurations. Back up your configuration before performing a reset.

9. ຂໍ້ມູນຈໍາເພາະ

Table 2: Grandstream GWN7811 Technical Specifications
ຄຸນສົມບັດລາຍລະອຽດ
ຕົວແບບGWN7811
ທ່າເຮືອ8x GbE RJ45, 2x SFP+
ຊັ້ນຊັ້ນ 3 ຈັດການ
ການອອກແບບພັດລົມແມ່ນແລ້ວ
ວັດສະດຸກໍລະນີໂລຫະ
ສະບັບtage12 ໂວນ (AC)
ລະດັບອຸນຫະພູມສູງສຸດ60 ອົງສາ Celsius
ນ້ໍາຫນັກລາຍການ2.11 ກິ​ໂລ (4.64 ປອນ​)
ຂະໜາດແພັກເກັດ16.57 x 10.39 x 2.17 ນິ້ວ
ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ຄອມພິວເຕີຕັ້ງໂຕະ (ອຸປະກອນເຄືອຂ່າຍທົ່ວໄປ)

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, and additional resources, please refer to the official Grandstream website or contact your authorized reseller. Grandstream provides comprehensive support for its products, including firmware updates and technical assistance.

ທາງການ Webເວັບໄຊ: www.grandstream.com

© 2024 Grandstream Networks, Inc. ສະຫງວນລິຂະສິດທັງໝົດ.

ຂໍ້ມູນໃນເອກະສານນີ້ແມ່ນມີການປ່ຽນແປງໂດຍບໍ່ມີການແຈ້ງການ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.