ຄູ່ມືຜູ້ໃຊ້ລົດຖີບ ProForm Cycle Trainer 400 RI ແບບ Recumbent

ແນະນຳ

This manual provides essential information for the safe and effective use of your ProForm Cycle Trainer 400 RI Recumbent Bike. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.

Figure 1: The ProForm Cycle Trainer 400 RI Recumbent Bike in use.

ການຕິດຕັ້ງແລະການປະກອບ

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included hardware pack for specific fasteners. Tools for assembly are typically provided.

Step 1: Attaching the Front Stabilizer

1. Locate the front stabilizer bar. Ensure the transport wheels face forward.
2. Align the stabilizer with the mounting points on the main frame.
3. Secure with the provided bolts and washers using the Allen wrench.

Step 2: Attaching the Rear Stabilizer

1. Locate the rear stabilizer bar. The handle for lifting should face backward.
2. Align the stabilizer with the mounting points on the main frame.
3. Secure with the provided bolts and washers.

Step 3: Assembling the Seat and Backrest

1. Attach the seat cushion to its bracket using the designated bolts.
2. Mount the seat assembly onto the main frame, ensuring the square-sided bolts are correctly oriented for stability. Tighten all bolts securely.
3. Slide the backrest into its position on the seat frame. Align the holes and secure with the four provided bolts.
4. Connect the seat adjustment wire from the seat to the main unit.

Step 4: Installing the Console Post and Console

1. Connect the console wires from the main unit to the console post. Ensure a secure connection.
2. Carefully slide the console post into the main unit, ensuring wires are not pinched. Secure with bolts.
3. Attach the console to the console post. Remove any pre-installed screws from the back of the console first, then use them to secure the console to the post.

Step 5: Attaching Handlebars and Pedals

1. Mount the handlebars to the console post, securing them with the provided bolts.
2. Attach the pedals. Note that the left pedal typically tightens by turning counter-clockwise (lefty-tighty) to prevent loosening during use. The right pedal tightens clockwise. Secure the foot straps.

ຮູບ 2: ຂ້າງ view of the assembled recumbent bike.

ຄໍາແນະນໍາການດໍາເນີນງານ

ປັບບ່ອນນັ່ງ

To adjust the seat position, pull the lever located beneath the seat. Slide the seat forward or backward to your desired position, then release the lever to lock it in place. Ensure the seat is securely locked before use.

Using the LCD Display Console

The integrated LCD display provides real-time workout data. Insert two AAA batteries (included) into the console's battery compartment. The console typically displays:

• ເວລາ: ໄລຍະເວລາຂອງການອອກກໍາລັງກາຍຂອງທ່ານ.
• ຄວາມໄວ: ຄວາມໄວຮອບວຽນປະຈຸບັນ.
• ໄລຍະທາງ: ໄລຍະຫ່າງທັງໝົດກວມເອົາໃນລະຫວ່າງການອອກກຳລັງກາຍ.
• ແຄລໍຣີ: ຄາດຄະເນການເຜົາຜານພະລັງງານ.
• ກຳມະຈອນ: Your heart rate, measured by gripping the hand sensors on the handlebars.
• ສະແກນ: ໝຸນວຽນໂດຍອັດຕະໂນມັດຜ່ານຟັງຊັນການສະແດງຜົນທັງໝົດ.

Use the 'Mode' button to cycle through display options and 'Set'/'Reset' buttons for specific adjustments or to clear data.

Adjusting Resistance Levels

The Cycle Trainer 400 RI features 16 digital resistance levels. Use the resistance control knob, usually located near the console, to increase or decrease the workout intensity. Turn clockwise for higher resistance, counter-clockwise for lower resistance.

iFIT Bluetooth Smart Enabled (Subscription Required)

This bike is compatible with iFIT via Bluetooth. Connect your own tablet or smartphone (not included) to access interactive training sessions. iFIT trainers can automatically adjust your bike's resistance for an optimized workout experience. A 30-day iFIT membership is typically included with purchase.

ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປອດໄພຂອງລົດຖີບນອນຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: ເຊັດລົດຖີບຫຼັງຈາກໃຊ້ແຕ່ລະຄັ້ງດ້ວຍໂຄສະນາamp ຜ້າເພື່ອກຳຈັດເຫື່ອ ແລະ ຝຸ່ນ. ຫຼີກລ່ຽງນໍ້າຢາທຳຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
• ການກວດກາ: ກວດ​ສອບ​ສະ​ລັອດ​ທັງ​ໝົດ, ແກ່ນ​ໝາກ​ໄມ້, ແລະ​ຊິ້ນ​ສ່ວນ​ເຄື່ອນ​ຍ້າຍ​ເປັນ​ໄລ​ຍະ​ເພື່ອ​ຄວາມ​ແໜ້ນ​ໜາ ແລະ​ສວມ. ຮັດ​ເຄື່ອງ​ທີ່​ວ່າງ​ໃຫ້​ແໜ້ນ.
• ການລະບາຍສີ: No regular lubrication is typically required for the internal magnetic resistance system. Consult the manufacturer if unusual noises occur.
• ການເກັບຮັກສາ: Store the bike in a dry, level area away from direct sunlight and extreme temperatures.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your recumbent bike, refer to the table below for common problems and solutions.

ຂໍ້ມູນຈໍາເພາະ

Figure 3: Product dimensions for the recumbent bike.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, product support, or to order replacement parts, please refer to the warranty card included with your purchase or visit the official ProForm webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.