ສາຍໄຟ Depow ປະເພດ 2 11kW 5 ແມັດ ຄູ່ມືຜູ້ໃຊ້ສີຟ້າ

1. ບົດແນະນຳ

Thank you for choosing the Depow Type 2 to Type 2 EV Charging Cable. This 11kW, 5-meter cable is designed to provide efficient and reliable charging for your electric vehicle at home, public charging stations, or supermarkets. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your charging cable.

Image: Depow Type 2 EV Charging Cable with included accessories.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always read and understand all safety instructions before using the product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not use the cable if it is damaged, frayed, or shows any signs of wear.
• Ensure the charging connectors are clean and dry before connecting.
• Do not immerse the cable or connectors in water. The cable has an IP54 rating, meaning it is protected from dust and splashing water, but not full immersion.
• Do not attempt to open, disassemble, repair, or modify the cable. Contact qualified personnel for service.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Always handle the cable by the insulated grips.

Image: Caution and usage instructions as printed on product packaging.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Depow Type 2 cable is designed for plug-and-play use. No complex installation is required.

1. ຖອດສາຍໄຟອອກ: Carefully remove the charging cable and its accessories (carry bag, cable ties, microfibre cloth) from the packaging.
2. ກວດ​ສອບ​ການ​ເສຍ​ຫາຍ​: Before first use, visually inspect the entire cable, including both connectors, for any signs of damage, cuts, or wear. Do not use if any damage is observed.
3. ກວດສອບຄວາມເຂົ້າກັນໄດ້: Ensure your electric vehicle and the charging station are equipped with Type 2 inlets/outlets. This cable is compatible with most vehicles using Type 2 connectors, such as ID.3, ID.4, ID.5, e-Golf, e-Up, Fiat 500, Model Y, Model 3, Spring, Kona, Ioniq 5, e-tron, ZOE, i3, i4, and 500 Hybrid.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Follow these steps to safely charge your electric vehicle:

1. ກະກຽມສໍາລັບການສາກໄຟ: Ensure your vehicle is parked safely and the charging port is accessible. Make sure the charging station is active and ready for use.
2. ເຊື່ອມຕໍ່ຫາສະຖານີສາກໄຟ: Take one end of the Depow Type 2 cable and firmly insert it into the Type 2 outlet of the charging station. Ensure it clicks into place securely.
3. ເຊື່ອມຕໍ່ກັບຍານພາຫະນະ: Take the other end of the cable and firmly insert it into your vehicle's Type 2 charging inlet. Ensure it clicks into place securely.
4. ເລີ່ມການສາກໄຟ: Follow the instructions on the charging station to start the charging process. This may involve swiping a card, using an app, or pressing a button. Your vehicle's dashboard or charging indicator will confirm that charging has begun.
5. ຕິດຕາມການສາກໄຟ: While charging, ensure the cable is not under tension or being driven over. The cable's durable TPU coating allows flexibility even in cold weather.
6. ຕັດການເຊື່ອມຕໍ່ຫຼັງຈາກສາກໄຟ: Once charging is complete, follow the charging station's instructions to stop the session. Disconnect the cable from your vehicle first, then from the charging station. Always handle the connectors by their grips.

Image: Hand holding the Type 2 connector.

Image: Connecting the cable to the vehicle.

5. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາທີ່ເຫມາະສົມຮັບປະກັນຄວາມທົນທານແລະການເຮັດວຽກທີ່ປອດໄພຂອງສາຍສາກໄຟຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: Regularly wipe down the cable and connectors with the provided microfibre cloth or a soft, dry cloth. If necessary, use a slightly damp cloth, ensuring all parts are completely dry before storage or next use. Do not use harsh chemicals or abrasive cleaners.
• ການເກັບຮັກສາ: After each use, coil the cable neatly. Use the included cable ties to secure it. Store the cable in the provided waterproof carry bag to protect it from dust, moisture, and physical damage. Store in a cool, dry place, away from direct sunlight and extreme temperatures.
• ການກວດກາ: Periodically inspect the cable for any signs of wear, cracks, fraying, or damage to the insulation or connectors. Check the rubber caps for the plugs for integrity. If any damage is found, discontinue use immediately and contact support.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Depow charging cable, try the following common troubleshooting steps:

• Cable Not Charging:
  • Ensure both ends of the cable are securely and fully inserted into the vehicle and charging station.
  • Check if the charging station is active and providing power.
  • Verify your vehicle's charging settings are correctly configured.
  • Ensure there are no error messages on the charging station or vehicle dashboard.
• ການສາກໄຟຊ້າ:
  • The actual charging speed (kW) is determined by the lowest rated component among the charging station, the charging cable, and your vehicle's on-board charger.
  • Ensure the charging station is delivering its maximum power output.
  • Check your vehicle's specifications for its maximum AC charging rate.
• ຄວາມຮ້ອນເກີນສາຍເຄເບີ້ນ:
  • Immediately disconnect the cable if it feels excessively hot.
  • Ensure the cable is fully uncoiled during charging to allow for proper heat dissipation.
  • Verify that the charging station and vehicle are operating within their specified temperature ranges.

ຖ້າຂັ້ນຕອນເຫຼົ່ານີ້ບໍ່ສາມາດແກ້ໄຂບັນຫາໄດ້, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Your Depow Type 2 Cable comes with a ການຮັບປະກັນມາດຕະຖານ 2 ປີ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຄວາມບົກຜ່ອງດ້ານການຜະລິດແລະຄວາມຜິດຂອງວັດສະດຸພາຍໃຕ້ເງື່ອນໄຂການນໍາໃຊ້ປົກກະຕິ.

ການຮັບປະກັນບໍ່ໄດ້ກວມເອົາ:

• ຄວາມເສຍຫາຍທີ່ເກີດຈາກການໃຊ້ຜິດ, ການລ່ວງລະເມີດ, ອຸບັດຕິເຫດ ຫຼື ການລະເລີຍ.
• ຄວາມເສຍຫາຍຈາກການສ້ອມແປງຫຼືການດັດແກ້ທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ.
• ການສວມໃສ່ແລະ້ໍາຕາປົກກະຕິ.
• Damage due to improper storage or environmental conditions.

For warranty claims or technical support, please contact the seller or manufacturer through the platform where the product was purchased. Please have your purchase receipt and product model number (T2C11L5) ready when contacting support.