KCO Lighting Linear Globe Chandelier

1. ບົດແນະນຳ

This manual provides detailed instructions for the safe installation, operation, and maintenance of your KCO Lighting Linear Globe Chandelier, Model L1043-SG. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The KCO Lighting Linear Globe Chandelier features a brushed nickel finish with seven smoke gray glass globes, designed to provide ambient lighting in various indoor settings such as kitchen islands, dining rooms, and living areas. Its design allows for adjustable height and compatibility with sloped, vaulted, slanted, or flat ceilings.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.

• ການ​ເຊື່ອມ​ຕໍ່​ໄຟ​ຟ້າ​ທັງ​ຫມົດ​ຕ້ອງ​ເປັນ​ໄປ​ຕາມ​ລະ​ຫັດ​ແລະ​ພິ​ທີ​ການ​ທ້ອງ​ຖິ່ນ​, ລະ​ຫັດ​ໄຟ​ຟ້າ​ແຫ່ງ​ຊາດ (NEC​)​, ແລະ ANSI/NFPA 70-1999​.
• ປຶກສາຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບຂະບວນການຕິດຕັ້ງ.
• ຫ້າມຕິດຕັ້ງອຸປະກອນນີ້ໄວ້ໃນບ່ອນທີ່ປຽກ ຫຼື ແຫ້ງamp locations. This product is for indoor use only.
• ໃຫ້ແນ່ໃຈວ່າຫນ້າດິນສາມາດຮອງຮັບນ້ໍາຫນັກຂອງ fixture ໄດ້.
• ໃຊ້ພຽງແຕ່ປະເພດຫລອດໄຟທີ່ລະບຸແລະວັດtage ເພື່ອຫຼີກເວັ້ນການ overheating.
• Do not touch the bulb directly with bare hands during operation or immediately after turning off, as it may be hot.

3. ເນື້ອໃນຊຸດ

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact customer support before proceeding with installation.

• Linear Chandelier Frame with Brushed Nickel Finish
• 7 Smoke Gray Glass Globes
• Canopy (Ceiling Plate)
• ຮາດແວຕິດຕັ້ງ (ສະກູ, ແກ່ນສາຍ, ແລະອື່ນໆ)
• Adjustable Rods (7.9"/20cm, 11.8"/30cm, 11.8"/30cm)
• E26 Base Bulbs (7 included)
• ຄູ່ມືການສອນ

Image: Close-up of the chandelier's components, highlighting the brushed nickel finish and smoke gray glass globes.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Professional installation is recommended for electrical fixtures. Ensure power is disconnected before starting.

4.1 Dimensions and Adjustable Height

The chandelier's length is 43.3 inches (110 cm), and each shade is 5.9 inches (15 cm) in diameter. The fixture comes with multiple rods (7.9"/20cm, 11.8"/30cm, 11.8"/30cm) allowing for a maximum hanging height of 31.5 inches (80 cm) and a minimum height of 7.9 inches (20 cm). Additional rods can be requested from the seller if needed.

Image: Product dimensions and adjustable height options.

Image: Customizing chandelier height with included rods.

4.2 ຂັ້ນຕອນການຕິດຕັ້ງ

1. ປິດໄຟ: Locate the circuit breaker or fuse box and turn off the power to the junction box where you will install the fixture.
2. ກະກຽມແຜ່ນຍຶດຕິດ: ຕິດແຜ່ນຍຶດຕິດກັບກ່ອງຕໍ່ສາຍໄຟໂດຍໃຊ້ສະກູທີ່ໃຫ້ມາ. ຮັບປະກັນວ່າມັນຖືກມັດຢ່າງແໜ້ນໜາ.
3. Assemble Rods: Determine your desired hanging height. Connect the appropriate combination of extension rods to the fixture body and the canopy. The fixture is compatible with sloped ceilings, allowing for flexible installation.
4. ການເຊື່ອມຕໍ່ສາຍ: Carefully connect the fixture's wires to the household electrical wires according to standard wiring practices (usually black to black, white to white, and ground to ground). Secure connections with wire nuts.
5. Mount Fixture: Carefully lift the fixture and secure the canopy to the mounting plate with the provided screws.
6. ຕິດຕັ້ງລູກໂລກແກ້ວ ແລະ ຫລອດໄຟ: Gently attach each smoke gray glass globe to the fixture. Insert the E26 base bulbs into the sockets.
7. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ ຫຼືກ່ອງຟິວ.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed, the KCO Lighting Linear Globe Chandelier operates like any standard light fixture controlled by a wall switch. If connected to a compatible dimmer switch and using dimmable E26 bulbs, the light output can be adjusted.

• ເປີດ/ປິດ: Use your wall switch to turn the chandelier on or off.
• ຟັງຊັນ Dimming: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the brightness by operating the dimmer switch.

Image: Chandelier providing warm illumination in a kitchen.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຊ່ວຍຮັກສາຮູບລັກສະນະແລະການເຮັດວຽກຂອງ chandelier ຂອງທ່ານ.

6.1 ການທໍາຄວາມສະອາດ

• ສະເຫມີຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.
• ເຊັດອຸປະກອນເສີມດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ.
• Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish or glass.
• For glass globes, a mild glass cleaner can be used, applied to a cloth first, not directly to the glass.

6.2 ການທົດແທນດອກໄຟ

• Ensure power is off and bulbs have cooled completely before attempting to replace them.
• Gently remove the glass globe by unscrewing it.
• Unscrew the old E26 bulb and replace it with a new E26 base bulb of the correct wattage (max 40W per bulb).
• Carefully reattach the glass globe.

7. ການແກ້ໄຂບັນຫາ

ຖ້າທ່ານພົບບັນຫາກັບ chandelier ຂອງທ່ານ, ອ້າງອີງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:

If the problem persists after trying these solutions, please contact KCO Lighting customer support.

Image: Information on contacting seller for replacement parts.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

9.1 ຂໍ້ມູນການຮັບປະກັນ

This KCO Lighting product comes with a ການຮັບປະກັນຂອງຜູ້ຜະລິດ 3 ປີ. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

9.2 ສະຫນັບສະຫນູນລູກຄ້າ

For any questions, concerns, or assistance with installation, operation, or warranty claims, please contact KCO Lighting customer support. If you received a broken, damaged, or cracked glass shade, or need extra rods or bulbs, communicate with the seller via your order number for replacement.

Please refer to your purchase platform or the KCO Lighting official webເວັບໄຊສໍາລັບລາຍລະອຽດການຕິດຕໍ່ສະເພາະ.