ຄູ່ມືຜູ້ໃຊ້ເຄສຄອມພິວເຕີ ENDORFY Ventum 200 ARGB ATX

1. ບົດແນະນຳ

Thank you for choosing the ENDORFY Ventum 200 ARGB ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system.

ຮູບທີ 1.1: The ENDORFY Ventum 200 ARGB ATX Computer Case, showcasing its sleek black design with a tempered glass side panel and illuminated ARGB fans visible through the mesh front.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always observe the following safety precautions to prevent injury and damage to your components:

• ຖອດສາຍໄຟອອກຈາກປລັກສຽບຝາກ່ອນຕິດຕັ້ງ ຫຼື ຖອດອຸປະກອນໃດໆອອກ.
• Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
• Handle components carefully. Avoid touching circuit boards directly.
• ຮັບປະກັນວ່າສາຍໄຟທັງໝົດຖືກວາງ ແລະ ຮັດແໜ້ນຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນການລົບກວນກັບພັດລົມ ຫຼື ຊິ້ນສ່ວນທີ່ເຄື່ອນທີ່ອື່ນໆ.
• Do not operate the computer case with the side panel removed unless performing maintenance or installation.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ທຸກ​ລາຍ​ການ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• ENDORFY Ventum 200 ARGB ATX Computer Case
• Pre-installed Stratus 120 PWM ARGB Fans (x4)
• ກ່ອງອຸປະກອນເສີມ (ສະກູ, ສາຍຮັດ, ຕົວຍຶດ, ຄູ່ມືຜູ້ໃຊ້)
• Removable Dust Filters (top, front, bottom)

ຮູບທີ 3.1: ລະເບີດຂຶ້ນ view of the ENDORFY Ventum 200 ARGB case, illustrating its various components including the chassis, tempered glass side panel, mesh front panel, top and bottom dust filters, and individual fans.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for proper assembly of your computer system within the Ventum 200 ARGB case.

4.1. ການຖອດແຜງດ້ານຂ້າງ

To access the interior, unscrew the four thumb screws securing the tempered glass side panel. Carefully remove the panel and set it aside on a soft, flat surface to prevent scratches.

ຮູບທີ 4.1: ຂ້າງ view of the ENDORFY Ventum 200 ARGB case, highlighting the tempered glass side panel which provides a clear view of internal components and is secured by four thumb screws.

4.2. ການຕິດຕັ້ງເມນບອດ

1. ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O ເຂົ້າໄປໃນຊ່ອງເປີດຖາດເມນບອດຈາກດ້ານໃນຂອງເຄສ.
2. Align your ATX motherboard with the pre-installed standoffs.
3. ຍຶດແຜງວົງຈອນຫຼັກໃຫ້ແໜ້ນໂດຍໃຊ້ສະກູທີ່ເໝາະສົມຈາກກ່ອງອຸປະກອນເສີມ.

4.3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).

1. ເລື່ອນ PSU ເຂົ້າໄປໃນຊ່ອງທີ່ອຸທິດຕົນຢູ່ທາງຫລັງດ້ານລຸ່ມຂອງເຄສ.
2. ຮັບປະກັນ PSU ດ້ວຍ screws ຈາກດ້ານຫລັງຂອງກໍລະນີ.

4.4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

The case supports multiple storage drives. Refer to the accessory box for specific mounting hardware for 2.5" SSDs and 3.5" HDDs.

4.5. ບັດກາຟິກ ແລະ ການຕິດຕັ້ງກາດຂະຫຍາຍ

1. ເອົາຊ່ອງສຽບ PCIe ທີ່ຈໍາເປັນອອກຈາກດ້ານຫລັງຂອງກໍລະນີ.
2. ໃສ່ກາດກຣາບຟິກ ຫຼື ບັດຂະຫຍາຍອື່ນໆຂອງທ່ານເຂົ້າໃນຊ່ອງ PCIe ຂອງເມນບອດ.
3. ຮັດບັດໃຫ້ແໜ້ນດ້ວຍສະກູ.

ຮູບທີ 4.2: ພາຍໃນ view of the ENDORFY Ventum 200 ARGB case, demonstrating ample space for a motherboard, graphics card, and other components, with pre-installed fans providing airflow.

4.6. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables effectively. This improves airflow and aesthetics.

4.7. ການ​ຕິດ​ຕັ້ງ​ພັດ​ລົມ​ແລະ radiator​

The Ventum 200 ARGB supports up to 7 fans. Four Stratus 120 PWM ARGB fans are pre-installed. Additional fan and radiator configurations:

• ດ້ານໜ້າ: Up to 3x 120mm or 2x 140mm fans, or up to 360mm radiator.
• ເທິງ: Up to 2x 120mm or 2x 140mm fans, or up to 240mm radiator.
• ດ້ານຫຼັງ: ພັດລົມ 1x 120 ມມ.

ຮູບທີ 4.3: ພາຍໃນ view of the case with arrows indicating the various locations for fan installation, highlighting the capacity for up to 7 fans for optimal airflow.

5. ການໃຊ້ໄຟ ARGB

The Ventum 200 ARGB features pre-installed ARGB fans that can be controlled for customized lighting effects.

5.1. ARGB Control

The ARGB lighting can be controlled in two ways:

• Case Controller: Use the dedicated ARGB button on the top I/O panel to cycle through various lighting modes and colors.
• ຊອບແວເມນບອດ: Connect the ARGB cable from the case's fan hub to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to synchronize and customize lighting effects.

ຮູບທີ 5.1: Close-up of the top I/O panel of the ENDORFY Ventum 200 ARGB case, showing the power button, reset button, USB 3.0 ports, audio jacks, and the dedicated ARGB control button.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and extends the lifespan of your computer components.

6.1. ການເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນ

The Ventum 200 ARGB case is equipped with removable dust filters on the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

• ຄ່ອຍໆດຶງຕົວກອງອອກ.
• ໃຊ້ລົມອັດ ຫຼື ແປງອ່ອນໆເພື່ອກຳຈັດຝຸ່ນທີ່ສະສົມໄວ້.
• Rinse with water if necessary (ensure completely dry before reinstallation).
• Reinstall the filters securely.

ຮູບທີ 6.1: A close-up detail of the fine mesh front panel, designed to ensure very good airflow while protecting the interior from dust penetration. This mesh is part of the removable filter system.

6.2. ທໍາຄວາມສະອາດທົ່ວໄປ

ໃຊ້ອ່ອນ, ງamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

7. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

7.1. ບໍ່ມີພະລັງງານ

• ໃຫ້ແນ່ໃຈວ່າ PSU ໄດ້ເປີດແລະເຊື່ອມຕໍ່ຢ່າງຖືກຕ້ອງກັບເຕົ້າສຽບຂອງຝາ.
• ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານທັງໝົດໄປຫາເມນບອດ, CPU ແລະກາດກຣາບຟິກ.
• Verify that the front panel power switch cable is correctly connected to the motherboard's header.

7.2. ພັດລົມບໍ່ spinning / ARGB ບໍ່ສະຫວ່າງ

• Check that the fans are properly connected to the fan hub or motherboard headers.
• Ensure the fan hub is receiving power (usually via SATA power connector).
• For ARGB, verify the 3-pin 5V ARGB cable is connected to a compatible motherboard header or that the case's ARGB button is being used.

7.3. ບັນຫາຄວາມຮ້ອນເກີນ

• ເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນແລະອົງປະກອບພາຍໃນທັງຫມົດ.
• Ensure fans are oriented correctly for optimal airflow (intake/exhaust).
• Verify that CPU cooler and GPU fans are functioning properly.
• ປັບປຸງການຄຸ້ມຄອງສາຍໄຟເພື່ອຫຼຸດຜ່ອນການອຸດຕັນຂອງກະແສລົມ.

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the ENDORFY Ventum 200 ARGB ATX Computer Case.

ຮູບທີ 8.1: Diagram illustrating the sleek and spacious design of the ENDORFY Ventum 200 ARGB case, capable of housing all components efficiently while maintaining a compact footprint.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ENDORFY products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ENDORFY webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ.

• ທາງການ Webເວັບໄຊ: www.endorfy.com
• ການຊ່ວຍເຫຼືອລູກຄ້າ: Refer to the 'Support' or 'Contact Us' section on the official webເວັບໄຊສໍາລັບລາຍລະອຽດການຕິດຕໍ່ພາກພື້ນ.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.