Vilcome DisplayPort Switch 8K Splitter User Manual

ແນະນຳ

This manual provides instructions for the Vilcome DisplayPort Switch 8K Splitter. This device allows for flexible DisplayPort signal management, supporting both 2-in-1-out and 1-in-2-out configurations. It is designed for high-resolution video and audio transmission.

ຂໍ້ມູນຄວາມປອດໄພ

• Ensure all cables are securely connected before powering on devices.
• Use only the provided USB power cable or a compatible 5V USB power source.
• ຫຼີກເວັ້ນການເປີດເຜີຍອຸປະກອນໃຫ້ມີຄວາມຊຸ່ມຊື່ນຫຼືອຸນຫະພູມທີ່ຮຸນແຮງ.
• Do not attempt to disassemble or repair the device. Contact support if issues arise.

ຄໍາແນະນໍາການຕິດຕັ້ງ

Follow these steps to set up your Vilcome DisplayPort Switch:

1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the included USB power cable to the DC 5V port on the switch and to a 5V USB power source (e.g., a computer USB port or a USB wall adapter). This power connection is essential for stable operation and to prevent screen flickering or black screens, especially in 1-in-2-out mode.
2. DisplayPort Cable Requirements: Use standard DisplayPort 1.4 cables for all connections to ensure optimal performance and resolution support.
3. ຮູບແບບການເຊື່ອມຕໍ່: The switch supports two primary modes:
• 2-in-1-out Mode: Connect two DisplayPort source devices (e.g., PC1, PC2) to the DP1 and DP2 input ports on the switch. Connect one DisplayPort display (e.g., Monitor) to the DP output port.
• 1-in-2-out Mode: Connect one DisplayPort source device (e.g., PC) to the DP input port on the switch. Connect two DisplayPort displays (e.g., Monitor 1, Monitor 2) to the DP1 and DP2 output ports.

ຮູບພາບ: Connection diagram illustrating the two operational modes: 2 PCs sharing 1 monitor (2-in-1-out) and 1 PC displaying on either Monitor 1 or Monitor 2 (1-in-2-out).

Ensure all connections are firm. The device is plug-and-play, requiring no driver installation.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Vilcome DisplayPort Switch features a single button for switching between connected devices or displays.

1. Switching Sources (2-in-1-out Mode): If you have two source devices connected to the DP1 and DP2 input ports and one display connected to the output, press the "SELECT" button on the switch to toggle between the two input sources. Only one source can be displayed at a time.

ຮູບພາບ: Illustration of the switch operating in 2-in-1-out mode, allowing one-click switching between two input devices to a single display.
2. Switching Displays (1-in-2-out Mode): If you have one source device connected to the DP input port and two displays connected to the DP1 and DP2 output ports, press the "SELECT" button to switch the signal between the two output displays. Only one display can be active at a time.


ຮູບພາບ: Illustration of the switch operating in 1-in-2-out mode, allowing a single input device to switch its output between two displays. Note that only one display can be active at a time.

3. Display Modes (Windows Laptops):
   • ຮູບແບບການຂະຫຍາຍ: For Windows laptops, the switch supports extended mode, allowing different content to be displayed on the two output screens (though not simultaneously active).
   • MirrorMode: The switch also supports mirror mode, where identical content is displayed on the active output screen.
4. Converter Compatibility: The input side supports USB-C to DP/mini DP to DP cables or USB-C hubs. The output side supports DP to HDMI/VGA/DVI converters. Note that using a converter may reduce the maximum supported resolution.

ບໍາລຸງຮັກສາ

• ຮັກສາອຸປະກອນໃຫ້ສະອາດໂດຍການເຊັດດ້ວຍຜ້າອ່ອນ, ແຫ້ງ.
• ຫຼີກເວັ້ນການນໍາໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂອງແຫຼວຫຼືວັດສະດຸຂັດ.
• Store the switch in a cool, dry place when not in use.

ການແກ້ໄຂບັນຫາ

No display or flickering screen:

• Ensure the USB power cable is connected and providing sufficient power to the switch. This is a common cause for display issues, especially in 1-in-2-out configurations.
• Verify that all DisplayPort cables are standard DP 1.4 and are securely connected.
• Check the resolution and refresh rate settings on your source device. The maximum supported resolution depends on your source, monitor, and cables.
• Test with different DisplayPort cables if possible.

Only one display works in 1-in-2-out mode:

This is expected behavior. The Vilcome DisplayPort Switch is designed to output to only one display at a time in 1-in-2-out mode. It is not a splitter for simultaneous display on two screens.

Resolution is lower than expected:

• Confirm that your source device, monitor, and DisplayPort cables all support the desired resolution and refresh rate (e.g., 8K@60Hz, 4K@120Hz).
• If using a DP to HDMI/VGA/DVI converter, note that resolution may be reduced due to converter limitations.

ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ: Visual comparison highlighting the clarity of 8K@60Hz resolution supported by the switch.

ຮູບພາບ: Diagram illustrating the higher data transfer bandwidth of DisplayPort 1.4 (32.4Gbps) compared to DisplayPort 1.2 (21.6Gbps).

ຮູບພາບ: Visual representation of the switch's broad compatibility with input devices like laptops, discrete graphics cards, and computers, and output devices such as monitors, HDTVs, and projectors.

ຂໍ້ມູນການຮັບປະກັນ

This Vilcome DisplayPort Switch comes with a ຮັບປະກັນ 12 ເດືອນ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຄວາມບົກຜ່ອງດ້ານການຜະລິດແລະການເຮັດວຽກຜິດປົກກະຕິພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ. ມັນບໍ່ກວມເອົາຄວາມເສຍຫາຍທີ່ເກີດຈາກການນໍາໃຊ້ທີ່ບໍ່ຖືກຕ້ອງ, ອຸປະຕິເຫດ, ການປ່ຽນແປງທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ, ຫຼືປັດໃຈພາຍນອກ.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, troubleshooting, or warranty inquiries, please contact Vilcome customer support. Refer to the product packaging or the official Vilcome webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.

When contacting support, please have your product model number (B0CB5HZWSP) and a description of the issue ready.