Einhell Cordless Angle Grinder TE-AG 18/125 CE Q Li Instruction Manual

1. ບົດແນະນຳ

The Einhell TE-AG 18/125 CE Q Li cordless angle grinder is a versatile and powerful tool designed for a variety of tasks including grinding, cutting, roughing, and polishing. As part of the Einhell Power X-Change family, this tool offers cordless freedom and compatibility with all Power X-Change batteries and chargers. It features a robust PurePOWER brushless motor for extended runtime and power, constant electronics for stable performance, and a quick-fix nut for easy disc changes. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Figure 1: The Einhell Power X-Change ecosystem, highlighting battery compatibility across various tools.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe the following safety precautions when operating the angle grinder to prevent injury and damage.

• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນ (PPE): Always wear safety goggles, hearing protection, and work gloves. A dust mask is recommended for dusty operations.
• ວຽກ​ງານ​ທີ່​ປອດ​ໄພ​: ໃຫ້ແນ່ໃຈວ່າຊິ້ນວຽກຖືກຍຶດຕິດຢ່າງແໜ້ນໜາamped ຫຼືຮັບປະກັນເພື່ອປ້ອງກັນການເຄື່ອນໄຫວໃນລະຫວ່າງການປະຕິບັດງານ.
• ການ​ຈັບ​ທີ່​ເຫມາະ​ສົມ​: Maintain a firm grip on the tool with both hands, using the additional handle provided.
• ກວດສອບສະພາບຂອງແຜ່ນດິດ: Before each use, inspect the grinding or cutting disc for cracks, chips, or damage. Replace damaged discs immediately.
• Correct Disc Type: Use only discs appropriate for the material and task. Ensure the disc's maximum RPM rating is higher than the tool's maximum speed.
• Adjust Disc Guard: Position the disc guard to provide maximum protection for the operator and to deflect sparks away from the body.
• ຫຼີກເວັ້ນການ Kickback: Be aware of potential kickback, especially when cutting. Maintain a stable stance and avoid binding the disc in the workpiece.
• ພື້ນທີ່ເຮັດວຽກທີ່ຈະແຈ້ງ: Keep the work area clean and well-lit. Remove any flammable materials.
• ຄວາມປອດໄພຫມໍ້ໄຟ: Use only Einhell Power X-Change batteries and chargers. Do not expose batteries to heat or water.
• ການປ້ອງກັນການໂຫຼດເກີນ: The tool is equipped with overload protection. If the tool stops, reduce pressure or allow it to cool down before resuming.
• ຣີສະຕາດການປົກປ້ອງ: The tool features restart protection to prevent accidental startup after a power interruption or battery change.

3. ອົງປະກອບຫຼາຍກວ່າview

Familiarize yourself with the main components of your Einhell Cordless Angle Grinder:

• Brushless Motor (PurePOWER): Provides high power and efficiency with minimal maintenance.
• ປຸ່ມລັອກ spindle: For securing the spindle during disc changes.
• Quick-Fix Nut: Allows for tool-free and rapid changing of grinding/cutting discs.
• Quick-Adjust Disc Guard: Protects against sparks and debris, adjustable without tools.
• ມືຈັບເພີ່ມເຕີມ: Can be mounted in two positions for optimal control and comfort.
• ປຸ່ມຄວບຄຸມຄວາມໄວຕົວແປ: Adjusts the rotational speed (3000-10500 RPM) for different materials.
• ຈໍສະແດງຜົນຄວາມໄວ LED: Indicates the selected speed setting.
• Dust Protection Grid: Integrated grid protects the tool's interior from dust and debris, removable for cleaning.
• ການໂຕ້ຕອບຫມໍ້ໄຟ: For connecting Power X-Change batteries.

4. ຕັ້ງຄ່າ

4.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

Ensure the battery is fully charged before use. The angle grinder is sold without a battery or charger, which must be purchased separately as part of the Power X-Change system.

1. Align the battery with the battery interface on the tool.
2. ເລື່ອນແບດເຕີລີ່ເຂົ້າໄປໃນບ່ອນຈົນກ່ວາມັນຄລິກຢ່າງປອດໄພ.
3. ເພື່ອເອົາອອກ, ໃຫ້ກົດປຸ່ມປ່ອຍໃນຫມໍ້ໄຟແລະເລື່ອນມັນອອກ.

Figure 2: Illustration indicating that the battery and charger are not included with the tool and must be purchased separately.

4.2 Disc Installation and Guard Adjustment

The angle grinder accepts cutting discs up to 125 mm in diameter.

1. ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ປິດເຄື່ອງ ແລະ ແບັດເຕີຣີອອກ.
2. ກົດປຸ່ມລັອກ spindle ຄ້າງໄວ້.
3. Unscrew the quick-fix nut by hand (or using a spanner if necessary, though it's designed for tool-free operation).
4. Place the desired grinding or cutting disc onto the flange, ensuring it is centered.
5. Screw the quick-fix nut back on and tighten it firmly by hand. Release the spindle lock button.
6. Adjust the quick-adjust disc guard to ensure maximum protection for your hands and body, deflecting sparks away from you.

Figure 3: Detail of the quick-fix nut mechanism for fast and tool-free disc changes.

4.3 Additional Handle Attachment

The additional handle can be screwed into either of the two mounting positions on the gear head for comfortable and secure two-hand operation.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການເປີດ/ປິດ

1. To switch on, slide the ON/OFF switch forward.
2. To switch off, release the ON/OFF switch. The tool will stop.

5.2 ການຄວບຄຸມຄວາມໄວຕົວປ່ຽນແປງ

The integrated variable speed control allows you to adjust the rotational speed between 3000 and 10500 RPM, optimizing performance for different materials and applications. The constant electronics feature ensures that the selected speed is maintained even under load.

1. Use the speed control dial to select the desired RPM.
2. Refer to the LED speed display for the current setting.
3. Lower speeds are generally suitable for polishing or working with sensitive materials, while higher speeds are for aggressive grinding and cutting.

Figure 4: Close-up of the variable speed control dial, allowing precise speed adjustment.

Figure 5: The LED display showing speed settings and an overload indicator for safe operation.

5.3 ຄໍາແນະນໍາການນໍາໃຊ້ທົ່ວໄປ

• ອະນຸຍາດໃຫ້ເຄື່ອງມືສາມາດບັນລຸຄວາມໄວຢ່າງເຕັມທີ່ກ່ອນທີ່ຈະຕິດຕໍ່ກັບ workpiece ໄດ້.
• Apply moderate pressure; excessive force can lead to overheating, reduced performance, and disc damage.
• Move the tool smoothly and consistently across the workpiece.
• For cutting, use a cutting disc and make shallow passes to avoid binding.
• For grinding, hold the disc at a slight angle to the workpiece.

Figure 6: An operator using the Einhell angle grinder for a cutting application, demonstrating proper safety gear and technique.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your angle grinder.

6.1 ການທໍາຄວາມສະອາດ

• ເອົາແບັດເຕີລີອອກສະເໝີກ່ອນທຳຄວາມສະອາດ.
• Clean the tool's exterior with a soft, damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• The integrated dust protection grid can be easily removed for cleaning. Regularly clean it to prevent dust buildup and ensure proper air circulation.
• Use compressed air to clear ventilation slots and internal components of dust and debris.

Figure 7: Close-up of the removable dust protection grid, designed to shield internal components from debris.

6.2 ການເກັບຮັກສາ

Store the angle grinder in a dry, secure place, out of reach of children. Remove the battery before storing for extended periods.

7. ການແກ້ໄຂບັນຫາ

ນີ້ແມ່ນບາງບັນຫາທົ່ວໄປ ແລະການແກ້ໄຂທີ່ເປັນໄປໄດ້ຂອງພວກມັນ:

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Einhell provides a 10-year guarantee on the PurePOWER brushless motor upon online registration. For detailed warranty information, product registration, or technical support, please visit the official Einhell webເວັບໄຊທ໌ຫຼືຕິດຕໍ່ຕົວແທນຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.