DEWALT ToughSeries 25ft Illuminated Tape Measure (DWHT35625S)

ແນະນຳ

The DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S) is engineered for durability and enhanced visibility in demanding work environments. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your tape measure.

ຮູບ 1: ດ້ານຫນ້າ view of the DEWALT ToughSeries 25ft Illuminated Tape Measure.

ຕັ້ງຄ່າ

ການສາກໄຟເບື້ອງຕົ້ນ

Before first use, fully charge the integrated LED battery. The tape measure includes a USB charging cable for convenience.

• Locate the USB charging port on the side of the tape measure.
• Connect the provided USB cable to the tape measure and a compatible USB power source (e.g., wall adapter, computer USB port).
• ໄຟສະແດງການສາກໄຟຈະສະຫວ່າງໃນລະຫວ່າງການສາກໄຟ.
• Allow approximately 3 hours for a full charge. A full charge provides up to 3 hours of continuous LED runtime.

Figure 2: The DEWALT ToughSeries tape measure showing the included USB charging cable.

Figure 3: The tape measure connected to a power source for charging.

ຄໍາແນະນໍາການດໍາເນີນງານ

ການຂະຫຍາຍ ແລະ ການຫົດໃບມີດ

• To extend the blade, pull the end hook away from the case.
• To retract the blade, release the end hook and allow the blade to smoothly return into the case. Guide the blade to prevent rapid retraction.

Using the Slide Lock

• To lock the blade at a desired measurement, push the slide lock button forward.
• To release the lock, pull the slide lock button backward.

Activating the LED Light

The integrated LED light illuminates the measurement area for improved visibility in low-light conditions.

• Press the LED power button (typically located near the blade opening) to turn the light on.
• ກົດປຸ່ມອີກເທື່ອຫນຶ່ງເພື່ອປິດໄຟ.
• The LED features an automatic shut-off function after 60 seconds of inactivity to conserve battery life.

Figure 4: The LED light illuminates the measurement area for clear readings.

ການວັດແທກການອ່ານ

The tape measure features a double-sided blade print, allowing for easy reading from various angles, including overhead measurements.

Figure 5: The double-sided blade print facilitates overhead measurements.

ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດ

• Regularly wipe the blade and case with a clean, damp ຜ້າເພື່ອເອົາຂີ້ຝຸ່ນແລະສິ່ງເສດເຫຼືອ.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the blade markings or case finish.
• Ensure the blade is dry before fully retracting it into the case to prevent rust.

ການດູແລຫມໍ້ໄຟ

• Recharge the battery when the LED light dims or fails to illuminate.
• ສຳລັບການເກັບຮັກສາໄລຍະຍາວ, ໃຫ້ສາກແບັດເຕີຣີໃຫ້ປະມານ 50% ແລະເກັບຮັກສາໄວ້ໃນບ່ອນທີ່ເຢັນແລະແຫ້ງ.

ການເກັບຮັກສາ

• Store the tape measure in a dry environment, away from extreme temperatures.
• The ToughSeries design provides a 100ft drop rating, but proper storage helps prolong the tool's lifespan.

ການແກ້ໄຂບັນຫາ

ໄຟ LED ບໍ່ເຮັດວຽກ

• ກວດເບິ່ງລະດັບຫມໍ້ໄຟ: The battery may be depleted. Connect the tape measure to a USB power source and allow it to charge for at least 30 minutes before attempting to use the LED again.
• Ensure Proper Activation: Press the LED power button firmly.

Blade Does Not Retract Smoothly

• ທໍາ​ຄວາມ​ສະ​ອາດ​ແຜ່ນ: Dust, dirt, or debris on the blade can hinder retraction. Extend the blade fully and carefully wipe it clean with a damp ຜ້າ.
• ກວດເບິ່ງສິ່ງກີດຂວາງ: Inspect the blade opening for any foreign objects that might be blocking the blade's path.

Slide Lock Not Engaging/Disengaging

• ລຶບລ້າງສິ່ງເສດເຫຼືອ: Ensure no debris is lodged around the slide lock mechanism.
• ການ​ດໍາ​ເນີນ​ງານ​ທີ່​ເຫມາະ​ສົມ​: Confirm you are pushing the slide lock fully forward to engage and fully backward to disengage.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

DEWALT products are typically covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official DEWALT webຫຼື ຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າຂອງເຂົາເຈົ້າ. ເກັບຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອການຮຽກຮ້ອງການຮັບປະກັນ.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, replacement parts, or further inquiries regarding your DEWALT ToughSeries 25ft Illuminated Tape Measure (Model DWHT35625S), please visit the official DEWALT website or contact their customer service department. When contacting support, please have your model number (DWHT35625S) and purchase details readily available.