Feit Electric LED Security Light Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH). This outdoor flood light features an adjustable three-head design, motion sensor, and dusk-to-dawn functionality, providing 5000 lumens of 5000K Daylight illumination.

ກະລຸນາອ່ານຄໍາແນະນໍາເຫຼົ່ານີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະຕິດຕັ້ງແລະເກັບຮັກສາຄູ່ມືນີ້ໄວ້ສໍາລັບການອ້າງອີງໃນອະນາຄົດ.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ສ່ຽງໄຟຊັອດ. ຕັດສາຍໄຟທີ່ຟິວ ຫຼືຕົວຕັດວົງຈອນກ່ອນການຕິດຕັ້ງ ຫຼືໃຫ້ບໍລິການ.

• Ensure the electrical supply is turned off before beginning installation.
• ຜະລິດຕະພັນນີ້ຕ້ອງໄດ້ຮັບການຕິດຕັ້ງຕາມລະຫັດການຕິດຕັ້ງທີ່ໃຊ້ໄດ້ໂດຍບຸກຄົນທີ່ຄຸ້ນເຄີຍກັບການກໍ່ສ້າງແລະການດໍາເນີນງານຂອງຜະລິດຕະພັນແລະອັນຕະລາຍທີ່ກ່ຽວຂ້ອງ.
• ໃຊ້ພຽງແຕ່ຕົວເຊື່ອມຕໍ່ສາຍທີ່ມີລາຍຊື່ UL/cUL.
• ຢ່າພະຍາຍາມດັດແປງອຸປະກອນ. ການ​ດັດ​ແກ້​ໃດໆ​ກໍ​ຕາມ​ອາດ​ຈະ​ລົບ​ລ້າງ​ການ​ຮັບ​ປະ​ກັນ​ແລະ​ສ້າງ​ຄວາມ​ສ່ຽງ​ດ້ານ​ຄວາມ​ປອດ​ໄພ​.
• The LED light source is integrated and cannot be replaced.

3. ເນື້ອໃນຊຸດ

ກວດສອບໃຫ້ແນ່ໃຈວ່າມີທຸກຊິ້ນສ່ວນຢູ່ກ່ອນເລີ່ມການຕິດຕັ້ງ:

• 1 x Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH)
• ຮາດແວຕິດຕັ້ງ (ສະກູ, ແກ່ນສາຍ)

Image 3.1: Packaging of the Feit Electric LED Security Light, showing the product and key features.

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

This fixture is designed for wall-mount installation and requires hardwiring.

4.1 ເຄື່ອງ​ມື​ທີ່​ຕ້ອງ​ການ (ບໍ່​ໄດ້​ລວມ​)

• ໝວດ ຫົວ screwdriver Phillips
• ສາຍລວດ
• ເຂັມ
• ເທບໄຟຟ້າ
• ແວ່ນຕາຄວາມປອດໄພ

4.2 ການຕິດຕັ້ງ Fixture

1. ປິດໄຟຢູ່ທີ່ຕົວຕັດວົງຈອນຫຼືກ່ອງຟິວ.
2. Remove the existing fixture (if applicable) and its mounting bracket.
3. Attach the new mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
4. ສອດສາຍໄຟຟ້າຈາກກ່ອງຕໍ່ສາຍຜ່ານຮູກາງຂອງແຜ່ນຍຶດ.

Image 4.1: Diagram illustrating the hands-free wiring and mounting back plate for easy installation.

4.3 Wiring the Fixture

1. Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
2. Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
3. Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
4. ສຽບສາຍໄຟທັງໝົດໃສ່ກ່ອງເຊື່ອມຕໍ່ຢ່າງລະມັດລະວັງ.

4.4 ການຮັບປະກັນ Fixture

1. Align the fixture with the mounting plate and secure it with the provided screws.
2. Ensure the fixture is flush against the mounting surface to prevent water intrusion.
3. Adjust the three light heads to direct illumination as desired. The heads are adjustable to provide up to 270 degrees of light coverage.

Image 4.2: The security light showing its adjustable heads and the motion and dusk-to-dawn sensor controls.

Image 4.3: The Feit Electric LED Security Light installed on an exterior wall, providing bright illumination at night.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

This security light features both a motion sensor and a dusk-to-dawn sensor for automated operation.

5.1 Motion Sensor Functionality

• The integrated motion sensor detects movement up to 60 feet away.
• When motion is detected at night, the light will activate.
• The duration the light stays on after motion detection can be adjusted using the 'TIMER' dial on the sensor.
• The sensitivity of the motion sensor can be adjusted using the 'SENSITIVITY' dial to control the detection range.

5.2 ການທໍາງານຂອງ Dusk-to-Dawn

• The built-in photocell sensor automatically turns the light on at dusk and off at dawn.
• This feature works in conjunction with the motion sensor, ensuring the light only activates when needed during nighttime hours.
• An 'Auto Dusk 'til Dawn override' feature is available, allowing the fixture to remain on continuously from dusk to dawn if desired. Consult the sensor control diagram for specific settings.

Image 5.1: Comparison showing the Feit Electric LED Security Light operating with its Dusk-to-Dawn feature, turning on automatically at night and off at dawn.

5.3 ການປັບຄວາມສະຫວ່າງ

The light output is dimmable from 500 lumens to 5000 lumens. This adjustment is typically controlled via the sensor unit, allowing you to set the desired brightness level for your security needs.

Image 5.2: Diagram illustrating the wide-beam optics of the security light, showing effective illumination distances at various heights.

6. ບໍາລຸງຮັກສາ

The Feit Electric LED Security Light is designed for long-lasting, maintenance-free operation. The integrated LEDs have an average life of 50,000 hours and do not require replacement.

6.1 ການທໍາຄວາມສະອາດ

• To clean the fixture, ensure power is off at the circuit breaker.
• ເຊັດພາຍນອກດ້ວຍຜ້າອ່ອນ, ງamp ຜ້າ. ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ອາດຈະທໍາລາຍຊັ້ນເຄືອບ ຫຼື ອົງປະກອບໄຟຟ້າໄດ້.
• Keep the motion sensor lens clean to ensure optimal performance.

Image 6.1: The security light is shown enduring rain, highlighting its all-weather cast aluminum housing and wet-location rating (IP65).

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

Image 8.1: Visual representation of key specifications including dimensions, CCT, wattage, brightness, life hours, IP rating, and voltage.

Image 8.2: The security light installed on a garage, featuring the Energy Star certification logo, indicating energy efficiency.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

9.1 ຂໍ້ມູນການຮັບປະກັນ

According to the product information, there is no specific warranty description provided for this product.

9.2 ສະຫນັບສະຫນູນລູກຄ້າ

For technical assistance or further inquiries, please visit the Feit Electric website or contact their customer service department. Refer to the product packaging for the most current contact information.